ADM Stage 1 CAM - No tune required - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

PatrickfromMD · 05-31-2009, 12:43 PM

Quote:

Originally Posted by ADM PERFORMANCE

Have you driven an Auto?

Sorry but I am just not a big fan of them.

Yea, I’m not a big fan either, but I did make the wife a promise my next car she would be able to drive from time to time.
So, help us all out with some good options for the L99.
Judging from the poor dyno showing of the L99, and how close its ¼ mile times are to the LS3, I have a feeling had the LS3 been available with the Auto, it would have had a comfortable advantage in the ¼ over the M6. Thoughts?

toehead93 · 05-31-2009, 01:16 PM

Agreed, but GM may have changed the gearing in the Auto to equal it out?

DON GIOVANNI · 05-31-2009, 05:42 PM

Would this Cam work on the L99?

nUcLeArEnVoY · 05-31-2009, 07:44 PM

I'd be interested in this cam, but are you sure the dealer wouldn't recognize it? That vid produced a non-stock sound. Maybe they'd know it was cammed? Or did it have an exhaust on it?

ADM PERFORMANCE · 05-31-2009, 10:41 PM

Quote:

Originally Posted by DON GIOVANNI

Would this Cam work on the L99?

Only if you deleted the cam phaser and dod.

ADM PERFORMANCE · 05-31-2009, 10:43 PM

Quote:

Originally Posted by nUcLeArEnVoY

I'd be interested in this cam, but are you sure the dealer wouldn't recognize it? That vid produced a non-stock sound. Maybe they'd know it was cammed? Or did it have an exhaust on it?

I drove mine to a car show and nobody even knew it had a cam..when I told them they said no way!

The cam in the video was running no cats(our exclusive offroad downpipes).The factory mufflers sound fantastic with our offroad pipes installed.

Off road pipes and cam made 400rwhp with stock airbox and no tune.This is a great package that can easily be unbolted and bolted back up...30-45 min max.

http://www.camaro5.com/forums/showthread.php?t=24895

Andy

alex33x · 06-02-2009, 09:54 PM

Quote:

Originally Posted by ADM PERFORMANCE

I drove mine to a car show and nobody even knew it had a cam..when I told them they said no way!

The cam in the video was running no cats(our exclusive offroad downpipes).The factory mufflers sound fantastic with our offroad pipes installed.

Off road pipes and cam made 400rwhp with stock airbox and no tune.This is a great package that can easily be unbolted and bolted back up...30-45 min max.

http://www.camaro5.com/forums/showthread.php?t=24895

Andy

So if warranty work time came, even if the car was fully tune per say with the ARH long tubes, the MAF and cam. The ECM with the tune could be swapped and the dealer would never know about it?

I ask cause Im interested in a whole package, including the cam, ARH, probably a catback, and your prototype MAF mayb e awhole intake if you have one completed by the time I get my car.

ADM PERFORMANCE · 06-02-2009, 11:02 PM

Quote:

Originally Posted by alex33x

So if warranty work time came, even if the car was fully tune per say with the ARH long tubes, the MAF and cam. The ECM with the tune could be swapped and the dealer would never know about it?

I ask cause Im interested in a whole package, including the cam, ARH, probably a catback, and your prototype MAF mayb e awhole intake if you have one completed by the time I get my car.

Yes,You will need an extra ECM that has had a crank variation learn done at some point and time after the new ecm is programmed and installed.

We just made a bit more,not much..Power today with a small tweek to the tune -

We will be testing 1 more item tommorow on this setup and then we will put headers on it....Headers should be going on early next week.

Andy

Sack Rat 2SS · 06-03-2009, 05:07 PM

Now that is impressive. Factory tune with ADM downpipes and mild cam and you get just over 400 rwhp. A few years ago with the LS1 and LS2 engines it took more than just two mods to get there. I recall headers, tune, no CATS, and CAI would get you close in the Vettes using factory cam. Looking forward to what additional tweek you do today before you do the headers.

alex33x · 06-04-2009, 12:51 AM

Quote:

Originally Posted by ADM PERFORMANCE

Yes,You will need an extra ECM that has had a crank variation learn done at some point and time after the new ecm is programmed and installed.

We just made a bit more,not much..Power today with a small tweek to the tune -

We will be testing 1 more item tommorow on this setup and then we will put headers on it....Headers should be going on early next week.

Andy

I wouldnt mind having an extra ECM for the tune, you just gain a customer for your cam, ARH long tubes and air intake.

Now just to wait to get my car so I can start modding. lol

Jeanius · 06-04-2009, 01:26 AM

IMO the sound on that vid def said CAM. How much would the install run?

ADM PERFORMANCE · 06-04-2009, 07:28 AM

We charge $700 on the stage 1 cam install.

ADM PERFORMANCE · 01-14-2010, 09:03 PM

Quote:

Originally Posted by ADM PERFORMANCE

We charge $700 on the stage 1 cam install.

Does not require springs.Takes 1 day

Andy

Sam88gta1 · 01-14-2010, 11:41 PM

Isnt this a stock ls9 cam?

05-31-2009, 01:16 PM	#44
toehead93 Drives: 2014 2SS/1LE Join Date: Feb 2007 Location: wpb fl Posts: 3,135 View My Garage	Agreed, but GM may have changed the gearing in the Auto to equal it out? __________________ Used Racing Brake 2 Peice Rotors for sale: http://www.camaro5.com/forums/showthread.php?t=344754 Summit White 2014 2SS 1LE Recaros, NPP exhaust, Nav 2010 2SS A6 - sold.

06-03-2009, 05:07 PM	#51
Sack Rat 2SS Drives: Silver SS/RS, Man 6 Join Date: Apr 2009 Location: DFW area, Texas Posts: 884	Now that is impressive. Factory tune with ADM downpipes and mild cam and you get just over 400 rwhp. A few years ago with the LS1 and LS2 engines it took more than just two mods to get there. I recall headers, tune, no CATS, and CAI would get you close in the Vettes using factory cam. Looking forward to what additional tweek you do today before you do the headers. __________________ Silver 2SS/RS Man/6 CTS-V front 6-Piston Calipers, GM 3.91 Rear Gears Last edited by Sack Rat 2SS; 06-03-2009 at 07:01 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LS3 CAM AND HEADERS DYNO	ADM PERFORMANCE	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	53	02-13-2016 07:15 PM
ADM shop car finally home	ADM PERFORMANCE	USA - Texas	14	07-14-2009 09:14 PM
LS3 goes 11`s Bonestock!	GMRULZ	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	28	12-08-2008 10:10 PM
tune for hot cam	logan1080	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	2	11-03-2008 08:30 AM
Roush Stage 3 Blackjack Mustang	TAG UR IT	General Automotive + Other Cars Discussion	16	05-21-2007 08:32 PM

05-31-2009, 05:42 PM	#45
DON GIOVANNI Drives: BLACK/BLACK 2SS RS GFX Join Date: Apr 2009 Location: NY Posts: 61	Would this Cam work on the L99?

05-31-2009, 07:44 PM	#46
nUcLeArEnVoY Oldbie that nobody knows Drives: 2011 1SS/RS M6 Join Date: Jun 2008 Location: Homestead, FL Posts: 3,459 View My Garage	I'd be interested in this cam, but are you sure the dealer wouldn't recognize it? That vid produced a non-stock sound. Maybe they'd know it was cammed? Or did it have an exhaust on it?

06-04-2009, 01:26 AM	#53
Jeanius Drives: Blk/Blk 2018 Sierra SLT Join Date: Dec 2006 Location: Golden State Posts: 2,925	IMO the sound on that vid def said CAM. How much would the install run?

06-04-2009, 07:28 AM	#54
ADM PERFORMANCE Drives: Anything I want Join Date: Oct 2008 Location: DfW - Texas Posts: 5,407	We charge $700 on the stage 1 cam install.

01-14-2010, 11:41 PM	#56
Sam88gta1 Drives: 2010 Camaro SS / 2006 CC Duramax Join Date: Aug 2009 Location: Rowlett Posts: 377	Isnt this a stock ls9 cam?