IF YOUR ON THE FENCE ABOUT THE BARTON SHORT THROW SHIFTER.... - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ddunerider · 02-02-2010, 07:32 PM

Hey can I install this with jack and jack stands?Should just lift the front of the car or the hole car?

11flat · 02-02-2010, 07:44 PM

Whatever it takes for you to get underneath. Jack stands in just the front of the car should be fine for most. Block the rear wheels and pull the Ebrake tight.

BWood · 02-02-2010, 08:24 PM

I did mine sitting on ramps. Worked out ok but would have been a lot easier if I wasn't such a fatass!

ddunerider · 02-03-2010, 12:18 AM

Quote:

Originally Posted by BWood

I did mine sitting on ramps. Worked out ok but would have been a lot easier if I wasn't such a fatass!

lol yea I'm big boned too..

orange_5thgen · 02-06-2010, 01:02 PM

Ok, so after reading all the differet posts on short throw's I decided to go with Barton.

Seems like everyone has been happy with it and you can't beat the price compared to the others!

Price and ease of install got me. Now the wait until I get it!

Heard a knock at the door. That might be it. Ok, probably not that quick, but get it to me soon. I'm gonna be like a kid waiting for Santa to arrive!

This is a birthday present too, so Happy B Day to me and I'm thankful I have a cool wife that will buy me stuff like this.

ddunerider · 02-06-2010, 01:17 PM

Installed!!!! Awesome Love it !!

The boot Pain in the A$$ laying on your back.

wer2foxs · 02-06-2010, 02:26 PM

Barton Industries was out of them recently. Does he have a new shipment in?

SicSix6 · 02-06-2010, 03:05 PM

Quote:

Originally Posted by ddunerider

Hey can I install this with jack and jack stands?Should just lift the front of the car or the hole car?

I used Jack stands, with no problem.

towmoe · 02-06-2010, 04:41 PM

Quote:

Originally Posted by wer2foxs

Barton Industries was out of them recently. Does he have a new shipment in?

I believe so. Mine shipped yesterday.

Barton Industries · 02-06-2010, 07:22 PM

Quote:

Originally Posted by wer2foxs

Barton Industries was out of them recently. Does he have a new shipment in?

We manufacture them in house, and yes we FINALLY have some more in stock

orange_5thgen · 02-06-2010, 09:16 PM

Quote:

Originally Posted by Barton Industries

We manufacture them in house, and yes we FINALLY have some more in stock

Cool. I just placed my order today, so I hope mine is one of the and thanks for the update.

ddunerider · 02-07-2010, 10:26 AM

Finally Got to drive around with mine yesterday at the cost of driveing in rain but I had too!The new shifter works great I dont notice any noise now with raido on jamming through the gears....Hot Rod!!!

11flat · 02-14-2010, 06:41 PM

Bump for a great product.

motor1 · 02-15-2010, 08:18 AM

Any update on the new style shift rods/arms?

02-02-2010, 07:32 PM	#43
ddunerider So-Cal Race team!! Drives: Tahoe LTZ,2010 2SS/M6 Camaro Join Date: Apr 2009 Location: Phillips Ranch ca. So-Cal Posts: 5,973 View My Garage	Hey can I install this with jack and jack stands?Should just lift the front of the car or the hole car? __________________ WE RACE DEEP!! BBK Intake, Flowmaster AT cat back Barton shifter,Painted stripes,,Heritage grill,LED DRLs, Smokin Tires!!

02-06-2010, 01:17 PM	#48
ddunerider So-Cal Race team!! Drives: Tahoe LTZ,2010 2SS/M6 Camaro Join Date: Apr 2009 Location: Phillips Ranch ca. So-Cal Posts: 5,973 View My Garage	Installed!!!! Awesome Love it !! The boot Pain in the A$$ laying on your back. __________________ WE RACE DEEP!! BBK Intake, Flowmaster AT cat back Barton shifter,Painted stripes,,Heritage grill,LED DRLs, Smokin Tires!!

02-07-2010, 10:26 AM	#54
ddunerider So-Cal Race team!! Drives: Tahoe LTZ,2010 2SS/M6 Camaro Join Date: Apr 2009 Location: Phillips Ranch ca. So-Cal Posts: 5,973 View My Garage	Finally Got to drive around with mine yesterday at the cost of driveing in rain but I had too!The new shifter works great I dont notice any noise now with raido on jamming through the gears....Hot Rod!!! __________________ WE RACE DEEP!! BBK Intake, Flowmaster AT cat back Barton shifter,Painted stripes,,Heritage grill,LED DRLs, Smokin Tires!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
STATUS OF A POSSIBLE RERUN TO HURST FOR SHORT THROW SHIFTER INSTALL	als 011 z28	USA - California	7	12-04-2009 11:48 AM
Short Throw Hurst Shifter Not Available	Matster	5th Gen Camaro SS LS LT General Discussions	51	11-09-2009 10:03 AM
Short Throw Shifter Constrained??	josh1147	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	75	02-19-2009 12:51 PM
Throw Shifter	wlvrine	5th Gen Camaro SS LS LT General Discussions	8	10-24-2008 06:22 AM

02-02-2010, 07:44 PM	#44
11flat Drives: 2010 camaro ss/rs m6 Join Date: Oct 2009 Location: moreno valley, ca Posts: 117	Whatever it takes for you to get underneath. Jack stands in just the front of the car should be fine for most. Block the rear wheels and pull the Ebrake tight.

02-02-2010, 08:24 PM	#45
BWood Drives: 2010 Camaro 2SS/RS M6 Join Date: Dec 2009 Location: Valencia, Ca. Posts: 141	I did mine sitting on ramps. Worked out ok but would have been a lot easier if I wasn't such a fatass!

02-06-2010, 01:02 PM	#47
orange_5thgen Drives: 2010 IOM 2SS/RS BadAss 6 Speed Join Date: Jan 2009 Location: Texas Posts: 199	Ok, so after reading all the differet posts on short throw's I decided to go with Barton. Seems like everyone has been happy with it and you can't beat the price compared to the others! Price and ease of install got me. Now the wait until I get it! Heard a knock at the door. That might be it. Ok, probably not that quick, but get it to me soon. I'm gonna be like a kid waiting for Santa to arrive! This is a birthday present too, so Happy B Day to me and I'm thankful I have a cool wife that will buy me stuff like this.

02-06-2010, 02:26 PM	#49
wer2foxs Drives: 2010 VR SS Join Date: Sep 2009 Location: Indianapolis, IN Posts: 722	Barton Industries was out of them recently. Does he have a new shipment in?

02-14-2010, 06:41 PM	#55
11flat Drives: 2010 camaro ss/rs m6 Join Date: Oct 2009 Location: moreno valley, ca Posts: 117	Bump for a great product.

02-15-2010, 08:18 AM	#56
motor1 Drives: 2010 Camaro 1SS/RS/M6.....no longer Join Date: Dec 2009 Location: Virginia Posts: 479 View My Garage	Any update on the new style shift rods/arms?