Lingenfelter Performance Engineering Customers - Page 45 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

RS-SS2 · 10-08-2009, 11:47 AM

Speed, no doubt there are some great people up there and I am sure junkies masterpiece will be blessed by Steve's hands.

1320junkie · 10-08-2009, 12:01 PM

Any of you guys get the half- shafts? I decided to along with the ZR1 dual clutch

600hp-lpe · 10-08-2009, 12:01 PM

Hi RS-SS2.. Good story.

LPE brotherhood fellow members, we are at 16 of 30 for pre-buys on the racing brake rotors. This is a GREAT deal. They are 25% off the discounted price. Once the pre buy is filled, the price goes up.

Windy City, 570hp-lpe, and 1320 Junkie are already ordering these. Get in before it's too late..

Paul, Speed, MWS444, RS-ss2, 2010Badss you DO NOT want to miss this brake upgrade..

These will save 4.5 lbs. in the front, 1 lb. in the rear.
It has many features over the stock rotor.

You can read about this item on the Racing brake site here:
http://www.racingbrake.com/CAMARO_SS...114-381-01.htm

To take advantage of this offer, you need to register on the racing brake forum and post to this thread:
http://forums.racingbrake.com/showthread.php?t=425

Don't miss out! Pictured is the OPEN SLOT rotor.
These have a patented design.
The open slot allows the rotor to cool, remove brake dust, and dissipate heat better than a closed slot. There are no need for cross drilled holes - the slot does the same thing with a higher level of braking!

1320junkie · 10-08-2009, 12:03 PM

For every 5lbs lost you gain 1 horsepower...get the brakes..lol

600hp-lpe · 10-08-2009, 01:13 PM

Quote:

Originally Posted by 1320junkie

For every 5lbs lost you gain 1 horsepower...get the brakes..lol

11 LBS lost, Cool better, Stop better, and look great. Trust me, you can't go wrong with these. They will be a Very high Quality 2 piece design.

Damn... maybe I should open a HP Chevy Camaro parts bin store. LOL

600hp-lpe · 10-08-2009, 03:59 PM

check out this red devil... I wonder if the owner really DRIVES this.. LOL
sounds like he may have the baddest street car around even if he don't.
Wonder what the price tag is to build this thing? 2 Mill? More? ROFL

I wonder if he lives in a state that requires a front Plate bracket.

check out the performance spec's below on the artist drawing!

Junkie, Here's your competition! Good thing that LS7 isn't in a Camaro!

Nelson Supercars & Mosler Mike have developed the world’s most powerful car. 1800 HP with only 2500 lbs of car, making 1.4 pounds per horsepower. We have redefined what performance is. 800 more horsepower than a Bugatti Veyron with 1630 lbs less weight. Applying maximum traction to the tires and progressively adding power with each gear. The NRE Mosler 900 uses dual fuel technology, driving up to 1150 HP on 91 octane and automatically switching fuel systems above 13 PSI of boost which enables over 1800 HP. 1710 ft lbs of torque. Cockpit controlled power at a touch of a button from 600 to 1800hp.

RS-SS2 · 10-08-2009, 04:17 PM

Quote:

Originally Posted by 1320junkie

Any of you guys get the half- shafts? I decided to along with the ZR1 dual clutch

I had the half shafts installed as well as the ZR1 dual clutch. Here is a pic from last Friday, one stock and one HD

600hp-lpe · 10-08-2009, 05:15 PM

I havn't got the half shafts yet.. I will before I take it out in the spring.

Speed and I are poor..LOL

The dual disc clutch is on my wish list of things to get.. I may wear out the stock clutch first.

Did you notice EVERYTHING costs 1K or more for this ride?

third1 · 10-08-2009, 05:34 PM

Quote:

Originally Posted by 570hp-lpe

Life IS good.. Going broke though. LOL

I pulled a Windy.. My contractor just finished re-siding the house. I still have stonework to be done on the front. I will post a pic of the homestead once that is done... House is getting it's LPE treatment... I changed from wood siding to Vinyl. I didn't want to have to paint this place. It is kinda big.

I get the Camaro, Wife gets the house done.

I may need a second Job.. there is no money left in the bank account for the wheels. LOL

Maybe Santa will put a set of forgelines under the ol' christmas tree for the camaro.

I here ya.I just finshed my house,did the lawn this summer.Everything looks good now but I'm still paying for my contractors thousands of $s screwups.The mods are very slow coming.Heres a pic of whats holding me back.

600hp-lpe · 10-08-2009, 07:03 PM

Quote:

Originally Posted by third1

I here ya.I just finshed my house,did the lawn this summer.Everything looks good now but I'm still paying for my contractors thousands of $s screwups.The mods are very slow coming.Heres a pic of whats holding me back.

Nice pad to keep the car dry.

I get the stonework done in about 18 days.. Will post pic's after. looks OK right now but there's an 18' span that just has house wrap on it right now..

Speed74SS · 10-08-2009, 10:35 PM

Quote:

Originally Posted by 570hp-lpe

I havn't got the half shafts yet.. I will before I take it out in the spring.

Speed and I are poor..LOL

The dual disc clutch is on my wish list of things to get.. I may wear out the stock clutch first.

Did you notice EVERYTHING costs 1K or more for this ride?

Yep - if our savings dips below a certain level, I'm sure the wife won't be happy. So, I have to get a few upgrades like the half-shafts and maybe ZR1 clutch over the winter. I just bought a set of stock rims and tires from a dealership for $1200. Now I have a set for my drag radials and some replacement rubber all around. I have to save up for any body parts also - too much stuff to think about. It's all good though - I can't wait until March!!

Speed74SS · 10-08-2009, 11:07 PM

Im watching Barrett Jackson on SPEED - maybe I'll see Windy.....although I'm not sure what he looks like

CamaroScotty · 10-08-2009, 11:20 PM

Quote:

Originally Posted by Speed74SS

Im watching Barrett Jackson on SPEED - maybe I'll see Windy.....although I'm not sure what he looks like

I watched a little - I didn't see him.

Speed74SS · 10-08-2009, 11:32 PM

Quote:

Originally Posted by CamaroScotty

I watched a little - I didn't see him.

It's always good to see your posts on here Scotty and its nice to see you are taking care of a couple of the LPE Brotherhood!!

10-08-2009, 03:59 PM	#622
600hp-lpe Drives: 2010 Join Date: Jul 2009 Location: NH Posts: 4,788	check out this red devil... I wonder if the owner really DRIVES this.. LOL sounds like he may have the baddest street car around even if he don't. Wonder what the price tag is to build this thing? 2 Mill? More? ROFL I wonder if he lives in a state that requires a front Plate bracket. check out the performance spec's below on the artist drawing! Junkie, Here's your competition! Good thing that LS7 isn't in a Camaro! Nelson Supercars & Mosler Mike have developed the world’s most powerful car. 1800 HP with only 2500 lbs of car, making 1.4 pounds per horsepower. We have redefined what performance is. 800 more horsepower than a Bugatti Veyron with 1630 lbs less weight. Applying maximum traction to the tires and progressively adding power with each gear. The NRE Mosler 900 uses dual fuel technology, driving up to 1150 HP on 91 octane and automatically switching fuel systems above 13 PSI of boost which enables over 1800 HP. 1710 ft lbs of torque. Cockpit controlled power at a touch of a button from 600 to 1800hp. Attached Images Last edited by 600hp-lpe; 10-08-2009 at 04:17 PM.

10-08-2009, 11:07 PM	#628
Speed74SS Drives: 2010 LPE 650+ CTS-V Join Date: Oct 2008 Location: Sioux Falls, SD Posts: 1,640	Im watching Barrett Jackson on SPEED - maybe I'll see Windy.....although I'm not sure what he looks like __________________ '10 CTS-V : LPE 650+ Package 587hp / 582tq 2.55 Upper / 8.6 Lower / ID850's / Kooks Longtubes / New Era CAI

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lingenfelter 2010 Camaro Engine Packages Including New Vehicle Now Available	Tim@Lingenfelter	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	6	06-18-2010 08:11 AM
Lingenfelter 2010 Camaro Engine Packages - up to 800hp!	Sizzox	5th Gen Camaro SS LS LT General Discussions	108	04-14-2010 08:09 PM
My Lingenfelter Camaro Build	Speed74SS	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	244	10-08-2009 11:00 PM
Lingenfelter Supercharged Camaro makes 600 RWHP!!	Kevin@Lingenfelter	Forced Induction - V8	218	06-24-2009 03:26 PM
Three 2010 Camaros Arrive at Lingenfelter Performance Engineering	Sizzox	5th Gen Camaro SS LS LT General Discussions	25	04-26-2009 02:15 PM

10-08-2009, 11:47 AM	#617
RS-SS2 Drives: 2010 Camaro, 09 mini, 01 3500 Join Date: Aug 2009 Location: Albuquerque Posts: 377 View My Garage	Speed, no doubt there are some great people up there and I am sure junkies masterpiece will be blessed by Steve's hands.

10-08-2009, 12:01 PM	#618
1320junkie Drives: The Imperial Army Join Date: Feb 2009 Location: The Darkside Posts: 15,742	Any of you guys get the half- shafts? I decided to along with the ZR1 dual clutch

10-08-2009, 12:01 PM	#619
600hp-lpe Drives: 2010 Join Date: Jul 2009 Location: NH Posts: 4,788	Hi RS-SS2.. Good story. LPE brotherhood fellow members, we are at 16 of 30 for pre-buys on the racing brake rotors. This is a GREAT deal. They are 25% off the discounted price. Once the pre buy is filled, the price goes up. Windy City, 570hp-lpe, and 1320 Junkie are already ordering these. Get in before it's too late.. Paul, Speed, MWS444, RS-ss2, 2010Badss you DO NOT want to miss this brake upgrade.. These will save 4.5 lbs. in the front, 1 lb. in the rear. It has many features over the stock rotor. You can read about this item on the Racing brake site here: http://www.racingbrake.com/CAMARO_SS...114-381-01.htm To take advantage of this offer, you need to register on the racing brake forum and post to this thread: http://forums.racingbrake.com/showthread.php?t=425 Don't miss out! Pictured is the OPEN SLOT rotor. These have a patented design. The open slot allows the rotor to cool, remove brake dust, and dissipate heat better than a closed slot. There are no need for cross drilled holes - the slot does the same thing with a higher level of braking!

10-08-2009, 12:03 PM	#620
1320junkie Drives: The Imperial Army Join Date: Feb 2009 Location: The Darkside Posts: 15,742	For every 5lbs lost you gain 1 horsepower...get the brakes..lol

10-08-2009, 05:15 PM	#624
600hp-lpe Drives: 2010 Join Date: Jul 2009 Location: NH Posts: 4,788	I havn't got the half shafts yet.. I will before I take it out in the spring. Speed and I are poor..LOL The dual disc clutch is on my wish list of things to get.. I may wear out the stock clutch first. Did you notice EVERYTHING costs 1K or more for this ride?