Vmax Intake Manifold "BLACK ICE-olator" V6 LLT Base Test Results - Page 5 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

PsychoZL1 · 02-14-2012, 10:08 AM

These findings sound great!

Mike, what size is your Ice-olator compared to Mace's 6mm, 12mm, and 25mm isolators?

Agarc · 02-14-2012, 10:13 AM

Quote:

Originally Posted by PsychoRS

These findings sound great!

Mike, what size is your Ice-olator compared to Mace's 6mm, 12mm, and 25mm isolators?

9mm well 9. something

rtcat600man · 02-14-2012, 10:52 AM

Quote:

Originally Posted by Agarc

9mm well 9. something

9.5 mm or the english version which is 3/8" or 0.375

bmorecam · 02-14-2012, 10:56 AM

9.75mm to be exact

if infact everyone's vararam sit a little higher as seen on norris pics then the vararam should fit better im thinking.

mydreamcar · 02-14-2012, 10:59 AM

'11CamaroLS · 02-14-2012, 11:14 AM

Quote:

Originally Posted by bmorecam

Got dyno coming up this wednesday for something similarly related to this exact subject actually. I cant say too much right now since it's still not 100% confirmed, but If everything look good you guys will have one hell of a surprise!

Have plenty of popcorn

so is this gonna make me wanna get Trifecta even more so? lol im not sure if that was possible...

bmorecam · 02-14-2012, 11:46 AM

If you guys see a new thread tomorrow by me then you know things went well and it paid off but if not, then we probably have more work to do. I will keep you guys updated!

No need to get everyone excited just yet

Agarc · 02-14-2012, 11:47 AM

your a tease, well hope fully by the end of the week i have my Black Ice lol

bmorecam · 02-14-2012, 11:55 AM

Quote:

Originally Posted by Agarc

your a tease, well hope fully by the end of the week i have my Black Ice lol

Sorry, I apologize if I'm teasing you guys. I promise my tease will be well worth it LOL.

Now let's focus back on mike Norris test for today

Mike Norris · 02-14-2012, 12:12 PM

Just about finished up here but wanted to post a couple pics of how the Vararam lined up. The top pic is without the BLACK ICE-olator and the VR just butted up to the TB, it would touch on top and have a small gap on the bottom. If I were to rotate the assembly up to make the "key fob" test tighter, the gap would widen a bit. But it would slide into the TB a little and be lined up okay with it slightly pointing down in relation to the TB angle.

The bottom pic is with the BLACK ICE-olator in place and the same "key fob" gap, the exit from the VR was about perfectly flush with the TB opening and would go into it a little easily.

So it seems the VMac BLACK ICE-olator and Vararam will fit fine together. I will finish up and go though all the numbers and give y'all the results. It will be relatively close to what we got from the stock vehicle. This car does show quite a bit of KR here and there as an FYI.

I will let y'all know soon, but for now I will say it is a go with the Vararam and I have a few left at the $150 shipped price and will have them in my hands tomorrow.

Mike Norris

hapisok · 02-14-2012, 12:18 PM

dyno sheets?

TJ91 · 02-14-2012, 12:22 PM

bmorecam · 02-14-2012, 12:27 PM

Can't wait to see the result from this.. Kr is natural for these cars. How much timing was the 1st car putting down mike? Please post up dyno sheets once done. Thanks!

TJ91 · 02-14-2012, 12:28 PM

oh man cant wait to see the dyno sheets, if the results are the same, im sold

02-14-2012, 10:59 AM	#61
mydreamcar My Dream Car Drives: 2011 SIM LS3 1SS Join Date: Jul 2009 Location: staten island Posts: 1,534	__________________ CAI intake/ADM Scoop/Stainless Power Headers/Dynatech cat back exhaust/Vitesse Throttle Control/ Ported Throttle Body/QTP Electric Cutouts/ 3.91 gears and janetty rear posi/ Tuned by Janetty racing

02-14-2012, 12:12 PM	#66
Mike Norris Account Suspended Join Date: Jul 2009 Location: Indianapolis, IN Posts: 592	Just about finished up here but wanted to post a couple pics of how the Vararam lined up. The top pic is without the BLACK ICE-olator and the VR just butted up to the TB, it would touch on top and have a small gap on the bottom. If I were to rotate the assembly up to make the "key fob" test tighter, the gap would widen a bit. But it would slide into the TB a little and be lined up okay with it slightly pointing down in relation to the TB angle. The bottom pic is with the BLACK ICE-olator in place and the same "key fob" gap, the exit from the VR was about perfectly flush with the TB opening and would go into it a little easily. So it seems the VMac BLACK ICE-olator and Vararam will fit fine together. I will finish up and go though all the numbers and give y'all the results. It will be relatively close to what we got from the stock vehicle. This car does show quite a bit of KR here and there as an FYI. I will let y'all know soon, but for now I will say it is a go with the Vararam and I have a few left at the $150 shipped price and will have them in my hands tomorrow. Mike Norris Attached Images

02-14-2012, 12:18 PM	#67
hapisok crazier than a coconut Drives: 2010 2SS/RS LS3 Join Date: Jul 2010 Location: virginia Posts: 1,547	dyno sheets? __________________

02-14-2012, 12:22 PM	#68
TJ91 :chevy: Drives: 2LT/RS Join Date: Jun 2008 Location: Toronto Posts: 13,035	__________________ CAMARO Consult your doctor before taking Camaro Side effects include Sudden increase in Heart Rate, Insomnia and occasional hallucinations If you experience Permagrin exceeding 4 hours after taking Camaro, seek immediate Camaro5 Help CAMARO Bringing excitment back into the Garage

02-14-2012, 12:28 PM	#70
TJ91 :chevy: Drives: 2LT/RS Join Date: Jun 2008 Location: Toronto Posts: 13,035	oh man cant wait to see the dyno sheets, if the results are the same, im sold __________________ CAMARO Consult your doctor before taking Camaro Side effects include Sudden increase in Heart Rate, Insomnia and occasional hallucinations If you experience Permagrin exceeding 4 hours after taking Camaro, seek immediate Camaro5 Help CAMARO Bringing excitment back into the Garage

02-14-2012, 10:08 AM	#57
PsychoZL1 Drives: 2015 Challenger SRT Join Date: May 2011 Location: Roy, UT Posts: 1,001	These findings sound great! Mike, what size is your Ice-olator compared to Mace's 6mm, 12mm, and 25mm isolators?

02-14-2012, 10:56 AM	#60
bmorecam Account Suspended Drives: jealous vendors mad!! HAHA!! Join Date: Jan 2011 Location: CYBERGMONSTER@GMAIL.COM Posts: 3,658 View My Garage	9.75mm to be exact if infact everyone's vararam sit a little higher as seen on norris pics then the vararam should fit better im thinking.

02-14-2012, 11:46 AM	#63
bmorecam Account Suspended Drives: jealous vendors mad!! HAHA!! Join Date: Jan 2011 Location: CYBERGMONSTER@GMAIL.COM Posts: 3,658 View My Garage	If you guys see a new thread tomorrow by me then you know things went well and it paid off but if not, then we probably have more work to do. I will keep you guys updated! No need to get everyone excited just yet

02-14-2012, 11:47 AM	#64
Agarc Dr.Frankenstein Drives: 15gt Join Date: Jul 2011 Location: MIA Posts: 1,568 View My Garage	your a tease, well hope fully by the end of the week i have my Black Ice lol

02-14-2012, 12:27 PM	#69
bmorecam Account Suspended Drives: jealous vendors mad!! HAHA!! Join Date: Jan 2011 Location: CYBERGMONSTER@GMAIL.COM Posts: 3,658 View My Garage	Can't wait to see the result from this.. Kr is natural for these cars. How much timing was the 1st car putting down mike? Please post up dyno sheets once done. Thanks!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2012 intake manifold	usa1camaro1969	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	33	09-01-2011 10:25 PM