ReRoute of Heater hoses w/ pics - Page 6 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

g-townmach · 04-06-2010, 07:47 PM

Thanks for the heads up on the ADM kit. Would this fix the gurgling sound?

Camaro21 · 04-06-2010, 09:27 PM

I don't know, I haven't heard it before or after the install..

BigRed585Lbs · 07-26-2010, 03:46 PM

Gates #18077 and #18078 for Gates fans.
http://www.amazon.com/Gates-18077-He.../dp/B000C2S7GA

POWERFREAK · 07-26-2010, 05:44 PM

Quote:

Originally Posted by g-townmach

Thanks for the heads up on the ADM kit. Would this fix the gurgling sound?

I'm thinking the gurgle comes from the heater hoses being routed so high up (higher than the radiator cap) so air gets trapped in there...so re-routed hoses should fix it.

BigRed585Lbs · 07-27-2010, 02:28 PM

Good point. Route them down low and away from the intake and fuel rail. What's the reason for the passenger fuel rail being subjected to higher fuel temperature than is found in the driver's side rail? That ought to be real good for balanced fuel distribution.

Yellow2010 · 09-13-2010, 01:50 PM

Quote:

Originally Posted by GMRULZ

I do have an early build and did not have the valves. I do not recall ever hearing gurgling noises and I definetly don`t now. Wish I could help.

Do you know how long the tubes are from auto zone that you purchased?

g-townmach · 09-14-2010, 12:09 PM

Does anyone know where the pdf for the TSB on the gurgling noise can be found. I remember someone posted it in a thread a long time ago but I forgot where.

It's the TSB saying to replace the check-valve in one of the heater hoses right where they pass through the firewall. Thanks.

GMRULZ · 09-15-2010, 11:42 AM

pm`s replied too.

caverman · 09-15-2010, 01:33 PM

Quote:

Originally Posted by GMRULZ

pm`s replied too.

Thanks!

Ovenmitt · 09-18-2010, 08:25 PM

Did mine today along with a heritage grille. Had to go to two autozones, since both stores only had one hose, but easy enough. Total time spent including the drive and heritage grille, around 2 hours

caverman · 09-23-2010, 11:30 AM

Did mine last night. I wrote up a DIY thread to help others get an idea of what it takes to do it.

Thanks for everyone that gave my input and to the OP for doing it in the first place.

To me this is a no brainer if you plan to race your car at all. For the money you can't go wrong.

http://www.camaro5.com/forums/showth...13#post2361613

BowlingSS · 03-06-2011, 05:48 PM

Looks like a great mod.

Bill

Stealth 2010 2SS/RS · 03-06-2011, 09:45 PM

I did the tech afx heater hose relocation kit.

Alfieboy · 03-06-2011, 09:56 PM

just ordered those 2 hoses from Amazon.,.

13 bux a piece..not too bad.. what did az want for theirs?

part # did not come up on their site

04-06-2010, 07:47 PM	#71
g-townmach I FARTED Drives: 2010 2SS/RS Join Date: Nov 2009 Location: cen-tex Posts: 870	Thanks for the heads up on the ADM kit. Would this fix the gurgling sound? __________________

07-26-2010, 03:46 PM	#73
BigRed585Lbs Drives: Sierra and Tahoe Join Date: Jul 2010 Location: By Marion, MS Posts: 1,324 View My Garage	Gates #18077 and #18078 for Gates fans. http://www.amazon.com/Gates-18077-He.../dp/B000C2S7GA Last edited by BigRed585Lbs; 07-27-2010 at 02:22 PM.

09-14-2010, 12:09 PM	#77
g-townmach I FARTED Drives: 2010 2SS/RS Join Date: Nov 2009 Location: cen-tex Posts: 870	Does anyone know where the pdf for the TSB on the gurgling noise can be found. I remember someone posted it in a thread a long time ago but I forgot where. It's the TSB saying to replace the check-valve in one of the heater hoses right where they pass through the firewall. Thanks. __________________

09-15-2010, 11:42 AM	#78
GMRULZ Drives: 2010 SS & 2008 C6 Join Date: Mar 2008 Location: VA Posts: 1,819	pm`s replied too. __________________ 2010 SS L99, 536rwhp 10.843@126.72. Whipple Supercharger stock pulley, ARH 1 7/8 longtubes w/ catted xpipe, magnaflow 3" mufflers, ADM Race CAI, 3:70 gears, lightweight wheels and nitto drag radials. Stock internal L99, stock converter. Bolt on best before blower 12.22@113.29 w/ nothing but ARH headers, catted x-pipe, ADM CAI and a tune on stock Pzero`s! Other car 2008 C6 Ls3, z51, A6, Npp Exhaust, best bonestock pass 11.80@118.82, Number 2 on the Corvette Forums Bonestock fastest list..

09-23-2010, 11:30 AM	#81
caverman Drives: '69 SS Convertible Join Date: May 2009 Location: DFW, TX Posts: 7,111	Did mine last night. I wrote up a DIY thread to help others get an idea of what it takes to do it. Thanks for everyone that gave my input and to the OP for doing it in the first place. To me this is a no brainer if you plan to race your car at all. For the money you can't go wrong. http://www.camaro5.com/forums/showth...13#post2361613 __________________ *-2010 Camaro* 2SS \| M6 \| VR w/White Stripes \| 1 3/4" KOOKS - 3" Magnaflow \| LPE 3.91 gears \| ADM tuned \| Halltech w/ADM Scoop \| Spohn/BMR Trailing Arm/Toe Rod \| BC Coilovers\| Pedders FE4 ZL1 swaybars \| Cradle/Diff/Radius Rod bushings \| VMax TB \| Morimoto Projectors \| MGW shifter \| Red Calipers Build Journal

04-06-2010, 09:27 PM	#72
Camaro21 Drives: SOLD - 2013 M6 ZL1 Join Date: Jul 2009 Location: Texas Posts: 5,040 View My Garage	I don't know, I haven't heard it before or after the install..

07-27-2010, 02:28 PM	#75
BigRed585Lbs Drives: Sierra and Tahoe Join Date: Jul 2010 Location: By Marion, MS Posts: 1,324 View My Garage	Good point. Route them down low and away from the intake and fuel rail. What's the reason for the passenger fuel rail being subjected to higher fuel temperature than is found in the driver's side rail? That ought to be real good for balanced fuel distribution.

09-18-2010, 08:25 PM	#80
Ovenmitt Account Suspended Drives: 2011 RJT 1SS Join Date: Apr 2010 Location: Fort Lewis, Washington Posts: 730	Did mine today along with a heritage grille. Had to go to two autozones, since both stores only had one hose, but easy enough. Total time spent including the drive and heritage grille, around 2 hours

03-06-2011, 05:48 PM	#82
BowlingSS Camaro Owner Since 1987 Drives: 2011 2SS/RS L99 RJT Join Date: Jun 2006 Location: Lawrenceville, GA Posts: 2,185	Looks like a great mod. Bill __________________ 2011 Camaro 2SS/RS L99 RJT CAI, Inc. Cold Air Induction;ADM Scoop Rx Catch Can;Rx Breather;Roto-Fab Washer Container VMax Ported RJT Throttle Body XSPower Headers and XSPower 3" Exhaust System Elite Engineering Tunnel Brace, Gorilla Wheel Lock System; Bear Rotors, Hawk HPS Tinted Windows 35%;EFILive Tune

03-06-2011, 09:45 PM	#83
Stealth 2010 2SS/RS Drives: Black 2SS/RS M6 Join Date: Mar 2010 Location: Minnesota, Vadnais Heights Posts: 494 View My Garage	I did the tech afx heater hose relocation kit. Attached Images

03-06-2011, 09:56 PM	#84
Alfieboy Madman Drives: 2017 1SS Join Date: Jun 2009 Location: RICHMOND VA Posts: 1,405 View My Garage	just ordered those 2 hoses from Amazon.,. 13 bux a piece..not too bad.. what did az want for theirs? part # did not come up on their site

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pics of the Classic Camaro Unveiling	DFWSS	USA - Texas	29	05-09-2009 09:44 AM
Seen a RED JEWEL TINTCOAT (RJT) CTF in person...and talked to the GM worker...(pics).	DETROIT2010Camaro	Camaro Photos \| Spyshots \| Video \| Media Gallery	25	04-28-2009 12:20 AM
Finally got to see one in person!!!!!! with pics	Evotion	Camaro Photos \| Spyshots \| Video \| Media Gallery	36	04-24-2009 12:02 PM
Thank God For Member: bjschubert And His IOM SS/RS Pics!	CoolestCamaro873	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	8	04-14-2009 02:34 PM
Pics of my Vegas trip this weekend (pics of a real nice 60's Camaro)	Mindz	Camaro Photos \| Spyshots \| Video \| Media Gallery	16	01-17-2008 12:29 AM