What mods are you doing this winter? (part II) - Page 7 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

GunnyG · 02-20-2012, 09:33 PM

Picked up a heritage grille from Farthestnorth, and Eagle Eyes from erk5000. Both are join in next week. Stripes by MnP Customs by the end of the month. But it's not exactly winter here in SoCal.

tonytahoe · 02-21-2012, 12:14 AM

Roto-Fab Intake with Carbon Fiber dipped tubes,relocating the heater hoses,evap hose.custom fuel rail setup with Tech AFX fuel lines and jumper hose.Carbon Fiber dipped intake cover,Holley Coil Covers also Carbon Fiber hydrodipped.Solo Cat-Back exhaust for the 2011 convertible.

Cynthius · 02-21-2012, 10:11 AM

Quote:

Originally Posted by Zdrrguy

Snow tires starting tomorrow, any recommendations ??

Like many have said, seems kinda late in the season to investigate Winter tires, either way I drove all Winter, including the few "bad" days we had and held up just fine with the Pirelli Scorpions & 2nd gear starts/low RPM shifts. Got them through 1010tires - they ship outta BC so no customs/duty etc...

Anyway... Back on topic - My Hurst shifter and Vararam intake go in this evening, I'm psyched!

stratman2SSRS · 03-31-2012, 09:35 PM

Winter's over and I'm still not done!!!!

Zdrrguy · 03-31-2012, 10:37 PM

Quote:

Originally Posted by stratman2SSRS

Winter's over and I'm still not done!!!!

Looks Good! .....hmmm I'm still waiting on that ride someone promised me but not gonna mention names.

Matster · 04-01-2012, 07:33 AM

Quote:

Originally Posted by stratman2SSRS

Winter's over and I'm still not done!!!!

You've had those pieces on and off the car so many times, I'm betting you can do it blind folded by now.

Matster · 04-01-2012, 07:46 AM

Quote:

Originally Posted by Zdrrguy

Looks Good! .....hmmm I'm still waiting on that ride someone promised me but not gonna mention names.

Be careful what you wish for Mark. I got that ride a couple of years ago and since then it has cost me a pile of money so I can giggle and grim that way anytime I want.

When the weather final decides that it is spring, you can drop by my place anytime and I'll take you out for a ride. I'm in your local area

Matster · 04-01-2012, 08:12 AM

Technically it is now spring but will be having the following done in a couple of weeks.

1) Drive Shaft Shop 1 piece drive shaft
Name: DSS 1 Piece Drive Shaft.jpg
Views: 104
Size: 26.6 KB

Name: DSS 1 Piece Drive Shaft.jpg
Views: 104
Size: 26.6 KB

2) Hotchkis Strut Tower Brace
Name: Hotchkis Strut Tower Brace.jpg
Views: 103
Size: 85.3 KB

3) Hotchkis Tunnel Chassis Brace
Name: Hotchkis Tunnel Chassis Brace.jpg
Views: 106
Size: 118.7 KB

And with these mods I'm done....no seriously I'm done... I think

stratman2SSRS · 04-01-2012, 08:53 AM

Quote:

Originally Posted by Zdrrguy

Looks Good! .....hmmm I'm still waiting on that ride someone promised me but not gonna mention names.

Next time we see each other for sure Mark.

Quote:

Originally Posted by Matster

You've had those pieces on and off the car so many times, I'm betting you can do it blind folded by now.

Blindfolded with a beer in one hand!!

Quote:

Originally Posted by Matster

Technically it is now spring but will be having the following done in a couple of weeks.

Spoke too soon, winter's not over yet!!!
Woke up to this....

DINGO · 04-01-2012, 10:44 AM

Yes Matt, I had that ride you speak of at Mosport. 220-230KM in the back straight on a damp track was indescribable.
Jeff, I have a plan. You can charge them $5 a lap to pay for the track day.

stratman2SSRS · 04-01-2012, 12:16 PM

Quote:

Originally Posted by DINGO

Yes Matt, I had that ride you speak of at Mosport. 220-230KM in the back straight on a damp track was indescribable.
Jeff, I have a plan. You can charge them $5 a lap to pay for the track day.

Great idea, $5/lap might cover tha fuel.

Matster · 04-01-2012, 01:35 PM

Quote:

Originally Posted by stratman2SSRS

Great idea, $5/lap might cover tha fuel.

Bout a gallon a lap, that's about right.

DINGO · 04-01-2012, 02:35 PM

At the track is was about $2 for 94 octain. Lol
Price change, $10 per lap. This includes personal lap video...

calbert1999 · 04-01-2012, 04:11 PM

Quote:

Originally Posted by Matster

Technically it is now spring but will be having the following done in a couple of weeks.

1) Drive Shaft Shop 1 piece drive shaft
2) Hotchkis Strut Tower Brace
3) Hotchkis Tunnel Chassis Brace

And with these mods I'm done....no seriously I'm done... I think

Yup. Until you do the 9" rear, now that you have those Nitto 315's. LOL

02-20-2012, 09:33 PM	#85
GunnyG Da WHALE Drives: 2014 Stingray, 2015 Panamera 4 Join Date: Dec 2011 Location: Oceanside, Ca - Originally from KCMO Posts: 8,867 View My Garage	Picked up a heritage grille from Farthestnorth, and Eagle Eyes from erk5000. Both are join in next week. Stripes by MnP Customs by the end of the month. But it's not exactly winter here in SoCal. __________________ Project MantaRay...Underway

03-31-2012, 09:35 PM	#88
stratman2SSRS Drives: Lingenfelter Camaro Join Date: Apr 2009 Location: Ontario Posts: 2,161 View My Garage	Winter's over and I'm still not done!!!! Attached Images __________________

04-01-2012, 08:12 AM	#92
Matster Drives: 2010 2SS/RS IOM/IOM #3625 Join Date: Jun 2008 Location: Greater Toronto Area Posts: 1,902 View My Garage	Technically it is now spring but will be having the following done in a couple of weeks. 1) Drive Shaft Shop 1 piece drive shaft 2) Hotchkis Strut Tower Brace 3) Hotchkis Tunnel Chassis Brace And with these mods I'm done....no seriously I'm done... I think __________________ 666 EVIL RWHP BUILT AND TUNED BY SHIFTED PERCEPTIONS INC.(SPi) 416 Forged Stroker, E-Force Supercharger, Blower Cam, Rotofab CAI, Stainless Works 2" LT Headers and 3" Exhaust, LPE ZR1 Twin Disc Clutch, DSS 1400 HP Axles, Pfadt Performance Kit Stage 3. Last edited by Matster; 04-01-2012 at 09:13 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My First Winter Mods..Elite..ADM..Roto-Fab	SSawdusty	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	9	02-10-2011 02:08 AM
Mods For Sale Part II	PonyMan	V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment	27	05-09-2010 01:21 AM
Scrming's Air Intake Experiment - Part II	scrming	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	94	05-02-2010 04:56 AM
DSV Customs Real Carbon Fiber 4 Gauge Pack Finished!!! (Pictures Inside)	dsvcustoms	Cosmetics and Lighting Modification Discussions	23	10-15-2009 10:43 PM
New DSV Customs Real Carbon Fiber Back Panel Inserts (Pictures Inside)	dsvcustoms	Cosmetics and Lighting Modification Discussions	3	10-12-2009 01:25 AM

02-21-2012, 12:14 AM	#86
tonytahoe Drives: 2011 Camaro Convertible 2SS/RS Join Date: May 2009 Location: Port Charlotte,Florida Posts: 263 View My Garage	Roto-Fab Intake with Carbon Fiber dipped tubes,relocating the heater hoses,evap hose.custom fuel rail setup with Tech AFX fuel lines and jumper hose.Carbon Fiber dipped intake cover,Holley Coil Covers also Carbon Fiber hydrodipped.Solo Cat-Back exhaust for the 2011 convertible.

04-01-2012, 10:44 AM	#94
DINGO Drives: 2010 CGM 2SS/RS M6 Join Date: Feb 2010 Location: Brampton, Ontario. Canada Posts: 398	Yes Matt, I had that ride you speak of at Mosport. 220-230KM in the back straight on a damp track was indescribable. Jeff, I have a plan. You can charge them $5 a lap to pay for the track day.

04-01-2012, 02:35 PM	#97
DINGO Drives: 2010 CGM 2SS/RS M6 Join Date: Feb 2010 Location: Brampton, Ontario. Canada Posts: 398	At the track is was about $2 for 94 octain. Lol Price change, $10 per lap. This includes personal lap video...