2014 Heat extractor on a 2010 hood - Page 9 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

LoneStar · 04-11-2014, 10:12 PM

That'll work. Be sure to clean it really well after sanding. Scotchbright pads work well to scuff up plastic (instead of using sandpaper).

Low RS · 04-12-2014, 02:21 AM

Quote:

Originally Posted by BigBlue2010

Just got mine in the mail. I want to paint it to match my car, and am going to prep it myself. I was just going to lighly sand it then hit it with some adhesion spray. Is that good enough?
Thanks in advance for the help.

be sure to post some pics when your done, we want to see it!!!!!

Jerry7297 · 04-12-2014, 10:54 AM

Quote:

Originally Posted by BigBlue2010

Just got mine in the mail. I want to paint it to match my car, and am going to prep it myself. I was just going to lighly sand it then hit it with some adhesion spray. Is that good enough?
Thanks in advance for the help.

Yep that should work. I have painted several plastic parts like that. Clear it good and a couple days later wax and polish it for a nice turn out...

Oh yeah and like Low RS said Post some pics.

Low RS · 04-16-2014, 05:35 PM

hey guys, im thinking about buying the scoop and rain tray and getting them all setup with the new bolts, washers and lock nuts to bolt it right in to where all you need to do is cut the hole and the hood liner. what do you think, would this help some one with the install? I would not charge any extra for the parts, just the fab on the rain tray and changing out the bolts, that would be around 50.00. plus the shipping to you.
if anyone is interested just pm me and we will get you fixed up.

KaBoom1701 · 04-18-2014, 07:01 PM

Will this clear a GM strut tower brace installed in the engine bay?

Low RS · 04-18-2014, 07:44 PM

Quote:

Originally Posted by KaBoom1701

Will this clear a GM strut tower brace installed in the engine bay?

I would think so, the 2014 has the same strut brace. may have to go to the chevy dealer and look at one to see.

Dexter9522 · 04-19-2014, 05:50 AM

Just got my peices in the mail today from Maureen. Pleasure to deal with. Exceptional customer service. Low rs I will be giving you a call when I do it this week. What type of blade did you use for the air saw. Like type and teeth ?

Jerry7297 · 04-19-2014, 09:18 AM

Metal Blade. More teeth is for metal less is for wood. Right about in the middle is good for Aluminum. Aluminum is soft and tends to get stuck in the teeth easy if you get too high of a count on the number of teeth. Good luck.

Low RS · 04-19-2014, 09:40 AM

Quote:

Originally Posted by Dexter9522

Just got my peices in the mail today from Maureen. Pleasure to deal with. Exceptional customer service. Low rs I will be giving you a call when I do it this week. What type of blade did you use for the air saw. Like type and teeth ?

no problem, the blades are standard metal cutting blades, nothing special. just take your time and it will be fine.

TxBandit911 · 04-19-2014, 11:17 AM

Ive been wondering what my hood vent would look like on a copo hood...

Low RS · 04-19-2014, 02:05 PM

Quote:

Originally Posted by TxBandit911

Ive been wondering what my hood vent would look like on a copo hood...

It would have pleanty of clearance. Lol. But it would look great

Spartan01 · 04-21-2014, 02:07 PM

That would look sweet, but wouldn't it ruin the cowl induction effect?

Dexter9522 · 04-22-2014, 04:11 AM

Low rs question. Is this the are you need to knock down to get it to sit flush

Dexter9522 · 04-22-2014, 06:23 AM

Also as far as measurements go the 16 3/8 from the top of the hood, do I line the top of the template up with that mark or the top of the cut to that mark

04-11-2014, 10:12 PM	#113
LoneStar Drives: 2011 IOM Camaro Join Date: Jul 2010 Location: Texas Posts: 3,446	That'll work. Be sure to clean it really well after sanding. Scotchbright pads work well to scuff up plastic (instead of using sandpaper). __________________

04-16-2014, 05:35 PM	#116
Low RS Drives: 2010 ''RS1'' my own package Join Date: Aug 2010 Location: Concord NC Posts: 237 View My Garage	hey guys, im thinking about buying the scoop and rain tray and getting them all setup with the new bolts, washers and lock nuts to bolt it right in to where all you need to do is cut the hole and the hood liner. what do you think, would this help some one with the install? I would not charge any extra for the parts, just the fab on the rain tray and changing out the bolts, that would be around 50.00. plus the shipping to you. if anyone is interested just pm me and we will get you fixed up. __________________ 2010 1LT A6, Hurst shifter and handle, 3pc rear spoiler, streetscene splitter, ss front end with ZL1 grill, ABL , footwell and cup holder lighting, ss cat back exhaust, Eibach lowering springs, custom engine cover, 4pk gauges, speedhut A pilliar pod and gauges, metra kit and kenwood stereo, 2014 ss hood scoop with stock rain tray, 3D Carbon fender vents, rear lighted bowtie, and ultra gauge.

04-18-2014, 07:01 PM	#117
KaBoom1701 KaBoom1701 Drives: 13' ZL1 Red M6 Join Date: Dec 2012 Location: I.E. SoCal (Yucaipa) Posts: 8,630	Will this clear a GM strut tower brace installed in the engine bay? __________________ Mods: Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats.

04-19-2014, 05:50 AM	#119
Dexter9522 Drives: SS Join Date: May 2013 Location: Az Posts: 273	Just got my peices in the mail today from Maureen. Pleasure to deal with. Exceptional customer service. Low rs I will be giving you a call when I do it this week. What type of blade did you use for the air saw. Like type and teeth ? Attached Images __________________ 2013 ss M6 471 / 428 adm intake / texas speed 1 7/8 long tubes no cats / npp / slp underdive pulley / cordes performance defibrillator cam / ported throttle body, intake manifold by CPR tuning by nic D

04-21-2014, 02:07 PM	#124
Spartan01 Drives: Evil Eva, 2010 2SS LS3 Join Date: Aug 2013 Location: Falls Church, Virginia Posts: 3,600	That would look sweet, but wouldn't it ruin the cowl induction effect? __________________ "You simply cannot trust quotes found on the internet." -Abraham Lincoln

04-19-2014, 09:18 AM	#120
Jerry7297 Drives: 2018 2SS/ 1LE Join Date: Sep 2012 Location: San Marcos TX Posts: 710 View My Garage	Metal Blade. More teeth is for metal less is for wood. Right about in the middle is good for Aluminum. Aluminum is soft and tends to get stuck in the teeth easy if you get too high of a count on the number of teeth. Good luck.

04-19-2014, 11:17 AM	#122
TxBandit911 Call Me"Doc" Drives: 2014 2SS/RS 1LE BLACK Join Date: Apr 2009 Location: Ft Riley, Kansas Posts: 890	Ive been wondering what my hood vent would look like on a copo hood...

04-22-2014, 04:11 AM	#125
Dexter9522 Drives: SS Join Date: May 2013 Location: Az Posts: 273	Low rs question. Is this the are you need to knock down to get it to sit flush Attached Images __________________ 2013 ss M6 471 / 428 adm intake / texas speed 1 7/8 long tubes no cats / npp / slp underdive pulley / cordes performance defibrillator cam / ported throttle body, intake manifold by CPR tuning by nic D

04-22-2014, 06:23 AM	#126
Dexter9522 Drives: SS Join Date: May 2013 Location: Az Posts: 273	Also as far as measurements go the 16 3/8 from the top of the hood, do I line the top of the template up with that mark or the top of the cut to that mark __________________ 2013 ss M6 471 / 428 adm intake / texas speed 1 7/8 long tubes no cats / npp / slp underdive pulley / cordes performance defibrillator cam / ported throttle body, intake manifold by CPR tuning by nic D