Any way to get rid of a Key scratch with out sanding? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Taintedveins · 04-16-2011, 12:51 PM

Topic sums it up. But i got a second key scratch last night around 5 inches long and i can't get rid of it any solutions? really don't wanna wet sand. (Both of the scratches go to primer.

lets_go_bills · 04-16-2011, 01:11 PM

You can't get rid of it. And if it has gone down to the primer, you need to repaint, unfortunately. Hate to say it, but you're screwed. I suppose you could try a filler like Quixx but nothing you do will ever make that 100% except repainting.

NicksVSix · 04-16-2011, 01:18 PM

People can be such dicks sometimes....I don't understand what makes some people wanna go and ruin or damage something that belongs to someone else. Makes me so angry!

Sorry to hear about that dude. Hopefully the jerk who did it gets run over by a bus or gets cancer.

Chobbs11 · 04-17-2011, 10:34 AM

You can, however, make it less noticeable until you get it painted. Try the Adams focus pads with the Adams polishes. They're very safe to use on a pc as it is not a forced rotation machine. If you use the focus pads with the included drill attachment you'll have to be ver careful as now it would be considered a rotary machine and has the potential to burn your paint.

It can't hurt if your gonna need to paint it anyway.

04-16-2011, 12:51 PM	#1
Taintedveins Shark attack! Drives: 2011 Camaro LS Join Date: Nov 2010 Location: Tucson, AZ Posts: 1,561 View My Garage	Any way to get rid of a Key scratch with out sanding? Topic sums it up. But i got a second key scratch last night around 5 inches long and i can't get rid of it any solutions? really don't wanna wet sand. (Both of the scratches go to primer. __________________

04-16-2011, 01:11 PM	#2
lets_go_bills Drives: 2011 Camaro 2LT/RS CGM M6 Join Date: Jul 2010 Location: Ontario Posts: 815	You can't get rid of it. And if it has gone down to the primer, you need to repaint, unfortunately. Hate to say it, but you're screwed. I suppose you could try a filler like Quixx but nothing you do will ever make that 100% except repainting. __________________ 2011 Chevrolet Camaro 2LT/RS Cyber Gray Metallic

04-16-2011, 01:18 PM	#3
NicksVSix Drives: 2014 2LT Red Rock Metallic Join Date: Jul 2010 Location: Ottawa, Ontario Posts: 1,082 View My Garage	People can be such dicks sometimes....I don't understand what makes some people wanna go and ruin or damage something that belongs to someone else. Makes me so angry! Sorry to hear about that dude. Hopefully the jerk who did it gets run over by a bus or gets cancer. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Remote Start on an M6	djb525	5th Gen Camaro SS LS LT General Discussions	65	12-23-2013 10:47 AM
Non-remote key available? Lockout Protection?	UCF w00t	5th Gen Camaro SS LS LT General Discussions	32	07-22-2011 08:14 AM
FINAL Production 2010/2009 Camaro! (PICS)	rray200	Camaro Photos \| Spyshots \| Video \| Media Gallery	799	05-19-2011 11:48 PM
Can YOUR key, open MY car?!?!	Mr. Wyndham	General Automotive + Other Cars Discussion	11	11-13-2007 07:44 AM

04-17-2011, 10:34 AM	#4
Chobbs11 Account Suspended Drives: 2011 IBM Camaro LS Join Date: Aug 2010 Location: Las Vegas Posts: 361	You can, however, make it less noticeable until you get it painted. Try the Adams focus pads with the Adams polishes. They're very safe to use on a pc as it is not a forced rotation machine. If you use the focus pads with the included drill attachment you'll have to be ver careful as now it would be considered a rotary machine and has the potential to burn your paint. It can't hurt if your gonna need to paint it anyway.