Need volunteers for exhaust samples Thursday night... - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

PQ · 07-16-2012, 03:01 PM

Ok folks. New updtate.

GMteSSted has volunteered to make mod cards for the sample volunteers. Click here and send him a PM with your info.

We will pass them out in the Lobby of the host hotel before the cruise. When you return from the cruise put them in your front window and we will guide you to the parking area reserved and where to park. Then you can place the card on your windshield and enjoy the sampling and meet and greet.

Attached Images

Quick tid bit:

We will be at the back of the parking lot wherever we end up. Being Thursday night and considering (believe it or not, lol) there will be non-Camaro5 guests, we will want to back the cars in so the exhaust is pointed away from the hotel.

And remember, if nothing else, it's a designated parking space if you want it.

As from the other thread we knew there would be a number of ways we could do this but we decided the best way would be to let people sample it on Thursday night following the cruise.

This is very informal. Just maybe we can help someone decide on their next mod.

Video clips online just don't do these cars any justice at all.

During the cruise I'll block off a number of spots for the sample cars to park.

Upon return of the cruise you'd have a parking spot waiting for you and could stay there or move the car whenever we are finished or whenever you decide.

We may not have a lot of potential exhaust samplers but nevertheless it will still be fun to hear the different systems.

One of the concerns doing it this way is that the cars blend in to each other but I dont' think that will be a problem as they wont' all be going at the same time the whole time.

If nothing else we can just hang out and have fun. After all, that's what is good about the fest.

You'd be asked to start your car and rev it a bit from time to time. Nothing you are uncomfortable with. Plus show your car if you'd like.

If you'd be willing to help out with your car please post up your exhaust mods from intake to tips. Cammed systems welcome as well.

Well just go from there and see how many different exhausts we can get.

Volunteers:

Name: 1.jpg
Views: 652
Size: 225.5 KB

cybercoaster · 07-16-2012, 03:14 PM

I can be there after the cruise

Kooks LT/Borla ATAK

*CamaroSpike23* · 07-16-2012, 03:15 PM

Quote:

Originally Posted by PQ

During the cruise I'll block off a number of spots for the sample cars to park.

so... does this mean you wont be going on the cruise?

need someone to find some weak spots in your car while you stay at the hotel?

PQ · 07-16-2012, 03:23 PM

Quote:

Originally Posted by cybercoaster

I can be there after the cruise

Kooks LT/Borla ATAK

Started the list in the OP. Thank you much.

I'll post up where to pull in after the cruise as it get's closer.

Quote:

Originally Posted by CamaroSpike23

so... does this mean you wont be going on the cruise?

need someone to find some weak spots in your car while you stay at the hotel?

Maybe. lol

*CamaroSpike23* · 07-16-2012, 03:39 PM

Quote:

Originally Posted by PQ

Started the list in the OP. Thank you much.

I'll post up where to pull in after the cruise as it get's closer.

Maybe. lol

lmk... I need to take Emily for a spin.

flht99b · 07-16-2012, 03:50 PM

I can do this.
ARH headers, high flow cats, stock cat back exhaust pipes w/resonators ( LS3 ) and GMPP touring mufflers.
Ed M.

Rickey · 07-16-2012, 04:44 PM

I have a V6 with Airaid CAI and Magnaflow American Thunder Axleback exhaust if interested

KnightRiderSS · 07-16-2012, 04:52 PM

If you need help I would be happy to:

SS
Borla-S type cat back X-pipe
QTP cutouts
OBX longtubes

K1SSRSS · 07-16-2012, 06:14 PM

I wouldn't mind, I probably would have gone a different route if I heard it in person, heck I probably still will after this.

I have a 3" CNT racing exhaust with stock manifolds and cats. But I also have a Roto-Fab cai and hopefully a ported TB on by C5F3

xSSkier874 · 07-16-2012, 06:15 PM

sign me up

ARH 1 7/8" long tubes
Mangnaflow street series mufflers

CamaroKid300 · 07-16-2012, 06:28 PM

Stock with Catback Borla ATAK

Could be a good comparison with the LT version and otherwise stock versions side by side.

fastfreddie · 07-16-2012, 06:46 PM

Looks like you already have a Borla Atak so if you don't want another one, that's okay with me. Here's what I have and I'm willing to participate if needed.

Borla Atak Catback, Borla Shorty Headers, Stock Cats, CAI Intake.

Sent from my iPhone using Tapatalk

*Mr. Wyndham* · 07-16-2012, 06:58 PM

I'll volunteer...sometimes it's nice to have a baseline...

ZL1 - Factory airflow from front to back.

chevy 3 · 07-16-2012, 08:38 PM

Id love to do this . I have airaid intake,jba shorty headers,mrt v2 axle back,trifecta tune,black ice intake spacer, and sounds great.

07-16-2012, 03:01 PM	#1
PQ Booooosted. Drives: 2010 Supercharged SS Join Date: Apr 2008 Location: Mobile, AL Posts: 36,716 View My Garage	Need volunteers for exhaust samples Thursday night... Ok folks. New updtate. GMteSSted has volunteered to make mod cards for the sample volunteers. Click here and send him a PM with your info. We will pass them out in the Lobby of the host hotel before the cruise. When you return from the cruise put them in your front window and we will guide you to the parking area reserved and where to park. Then you can place the card on your windshield and enjoy the sampling and meet and greet. Attached Images Quick tid bit: We will be at the back of the parking lot wherever we end up. Being Thursday night and considering (believe it or not, lol) there will be non-Camaro5 guests, we will want to back the cars in so the exhaust is pointed away from the hotel. And remember, if nothing else, it's a designated parking space if you want it. As from the other thread we knew there would be a number of ways we could do this but we decided the best way would be to let people sample it on Thursday night following the cruise. This is very informal. Just maybe we can help someone decide on their next mod. Video clips online just don't do these cars any justice at all. During the cruise I'll block off a number of spots for the sample cars to park. Upon return of the cruise you'd have a parking spot waiting for you and could stay there or move the car whenever we are finished or whenever you decide. We may not have a lot of potential exhaust samplers but nevertheless it will still be fun to hear the different systems. One of the concerns doing it this way is that the cars blend in to each other but I dont' think that will be a problem as they wont' all be going at the same time the whole time. If nothing else we can just hang out and have fun. After all, that's what is good about the fest. You'd be asked to start your car and rev it a bit from time to time. Nothing you are uncomfortable with. Plus show your car if you'd like. If you'd be willing to help out with your car please post up your exhaust mods from intake to tips. Cammed systems welcome as well. Well just go from there and see how many different exhausts we can get. Volunteers: __________________ Last edited by PQ; 07-26-2012 at 11:57 PM.

07-16-2012, 03:50 PM	#6
flht99b Drives: 2010 Camaro 2SS/RS RJT Join Date: May 2009 Location: Knoxville Posts: 1,574 View My Garage	I can do this. ARH headers, high flow cats, stock cat back exhaust pipes w/resonators ( LS3 ) and GMPP touring mufflers. Ed M. __________________ RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers, rotors & pads, BMR Trailing & Toe Arms, rear cradle & diff bushes, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, GTO clutch reservoir, LS9 cam, Comp valve springs, Melling 10296 oil pump, CR5 timing chain, LS6 damper, CAI Cold Air Intake, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 whls, 275/40/20 & 315/35/20 tires, 2011 Convertible spoiler, 1LE front spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat, wrapped console & Grant steering wheel.

07-16-2012, 04:44 PM	#7
Rickey IOM4EVR Drives: 2010 Camaro LT1/RS Join Date: Jan 2010 Location: Jacksonville, NC Posts: 254 View My Garage	I have a V6 with Airaid CAI and Magnaflow American Thunder Axleback exhaust if interested __________________ [SIGPIC][/SIGPIC]

07-16-2012, 04:52 PM	#8
KnightRiderSS Voodoo Medicine Man Drives: Black 2SS with RS package Join Date: Jul 2010 Location: IL Posts: 917	If you need help I would be happy to: SS Borla-S type cat back X-pipe QTP cutouts OBX longtubes __________________

07-16-2012, 06:14 PM	#9
K1SSRSS Chief Many Camaros Drives: A paid off Camaro!!! Join Date: Mar 2009 Location: Las Cruces, NM Posts: 1,863 View My Garage	I wouldn't mind, I probably would have gone a different route if I heard it in person, heck I probably still will after this. I have a 3" CNT racing exhaust with stock manifolds and cats. But I also have a Roto-Fab cai and hopefully a ported TB on by C5F3 __________________ 504hp/478tq Performance: Kooks LT, 3'' Exhaust, V-Max TB, Roto-Fab CAI, Custom Ported/Port Matched Heads and Intake Suspension: BMR Adjustable LCA's, BMR Trailing Arms, Poly Bushings, BMR Toe Rods Coming Soon (still in the box): Procharger F1R, G-Force Axles, 3:91 gears w/Eaton Truetrac

07-16-2012, 03:14 PM	#2
cybercoaster Drives: 2017 2SS 50th Anv, 1972 RS Join Date: Mar 2009 Location: Oklahoma City Posts: 1,588 View My Garage	I can be there after the cruise Kooks LT/Borla ATAK

07-16-2012, 06:15 PM	#10
xSSkier874 Drives: 17 Silverado, 99 Miata Join Date: Aug 2009 Location: Flatrock, MI Posts: 421	sign me up ARH 1 7/8" long tubes Mangnaflow street series mufflers

07-16-2012, 06:28 PM	#11
CamaroKid300 ace5.org Drives: 2017 ZL1 M6 Join Date: Apr 2010 Location: Atlanta, GA Posts: 6,142 View My Garage	Stock with Catback Borla ATAK Could be a good comparison with the LT version and otherwise stock versions side by side. __________________ Stock...For Now.

07-16-2012, 06:46 PM	#12
fastfreddie FreakyFast! Drives: 2010 2SS/RS S/C NicKey #55 Join Date: Feb 2011 Location: Central Illinois Posts: 931	Looks like you already have a Borla Atak so if you don't want another one, that's okay with me. Here's what I have and I'm willing to participate if needed. Borla Atak Catback, Borla Shorty Headers, Stock Cats, CAI Intake. Sent from my iPhone using Tapatalk __________________ 2010 2SS/RS #55 NicKey Stage 2S Super-Camaro custom painted by Pete (Mr. Showstopper) Build Thread: http://www.camaro5.com/forums/showthread.php?t=250743 Last edited by fastfreddie; 07-17-2012 at 09:22 AM.

07-16-2012, 06:58 PM	#13
Mr. Wyndham I used to be Dragoneye... Drives: 2018 ZL1 1LE Join Date: Jan 2007 Location: Buffalo, NY Posts: 31,876 View My Garage	I'll volunteer...sometimes it's nice to have a baseline... ZL1 - Factory airflow from front to back. __________________ *"Keep the faith."* - Fbodfather

07-16-2012, 08:38 PM	#14
chevy 3 NEcamaro5 Drives: Black 2ss rs 1LE Join Date: Apr 2009 Location: mass Posts: 4,328 View My Garage	Id love to do this . I have airaid intake,jba shorty headers,mrt v2 axle back,trifecta tune,black ice intake spacer, and sounds great.