ZL1 and ZL1 1LE race ramp questions - Page 2

Stephen12ZL1 · 02-16-2018, 08:51 PM

Quote:

Originally Posted by ReefBlueCoupe

Anyone with the 56" Race Ramps back up on to them to say service the rear diff? If so, did the front end clear the ground? I can try it, but haven't yet.

yes, this will work fine even with my antiquated rhino ramps

blk04sr · 03-05-2018, 02:01 PM

FYI they make extenders for those who have the 56" version

https://raceramps.com/car-ramps/gara...amps/xtenders/

*Mr. Wyndham* · 05-10-2018, 10:35 PM

I can post pictures at a bit of a later date...but I can confirm that the Race Ramps RR-TR 7" (74" length) will clear the ZL1 1LE with the front struts in full height setting with about an inch to spare. So it should also clear in full low setting.

Sooner Cole · 05-11-2018, 10:06 AM

I got the 56" two piece ramps for 17 ZL1. They worked perfect. When I got my 18 ZL1LE, I had to get the extenders as the approach angle was just a little too steep.

MValdez17 · 05-11-2018, 07:39 PM

Just received my 67" Race Ramps today. They clear the splitter, but do rub up on the rubber and plastic pieces that sit under the splitter. Going to have to order the XTenders unfortunately.

I would suggest getting the 72" for the ZL1 1LE.

Chevyman2 · 05-11-2018, 07:52 PM

Quote:

Originally Posted by MValdez17

Just received my 67" Race Ramps today. They clear the splitter, but do rub up on the rubber and plastic pieces that sit under the splitter. Going to have to order the XTenders unfortunately.

I would suggest getting the 72" for the ZL1 1LE.

I also have 67 inch race ramps and confirm rubbings zl1 . I found discount ramps had the best price at time of my purchase.

nicktechla · 07-15-2018, 01:06 AM

So these 67" ramps rub a bit?

https://www.amazon.com/Race-Ramps-RR...ace+ramp+67%22

satanschariot666 · 07-15-2018, 03:42 AM

all lenghts ramps will rub dont worry about that you can even get the 56
all you need to clear it with room to spare is to find a spot where a floor is slightly offset from the pavement
even the slightest rise of the front wheels will do it
u can even put the cardboard the ramps came in and drive over it w the front wheels
once the car is pointing up there will magically be tons of clearance

satanschariot666 · 07-15-2018, 03:46 AM

straight is an illusion
things that appear straight are infact curved

nicktechla · 07-15-2018, 09:49 AM

Quote:

Originally Posted by satanschariot666

all lenghts ramps will rub dont worry about that you can even get the 56
all you need to clear it with room to spare is to find a spot where a floor is slightly offset from the pavement
even the slightest rise of the front wheels will do it
u can even put the cardboard the ramps came in and drive over it w the front wheels
once the car is pointing up there will magically be tons of clearance

nice, thanks

*mlee* · 07-08-2020, 11:33 AM

Needs about 4" to get on an 18' Aluma Tilt

I put a couple of 12" X 1" square pieces of wood I put under the race ramps that work well.

Name: ramp.JPG
Views: 622
Size: 156.3 KB

Name: ramp.JPG
Views: 622
Size: 156.3 KB

Tyrolblue67 · 07-08-2020, 06:40 PM

I bit the bullet and went with the Race Ramp 80's. Plenty of clearance.
Tyrolblue67

05-10-2018, 10:35 PM	#17
Mr. Wyndham I used to be Dragoneye... Drives: 2018 ZL1 1LE Join Date: Jan 2007 Location: Buffalo, NY Posts: 31,876 View My Garage	I can post pictures at a bit of a later date...but I can confirm that the Race Ramps RR-TR 7" (74" length) will clear the ZL1 1LE with the front struts in full height setting with about an inch to spare. So it should also clear in full low setting. __________________ *"Keep the faith."* - Fbodfather

05-11-2018, 10:06 AM	#18
Sooner Cole Drives: 2019 ZL1-1LE A10 Join Date: Jan 2017 Location: Oklahoma Posts: 512	I got the 56" two piece ramps for 17 ZL1. They worked perfect. When I got my 18 ZL1LE, I had to get the extenders as the approach angle was just a little too steep. __________________ 19 ZL1-1LE A10

05-11-2018, 07:39 PM	#19
MValdez17 Drives: 2010 Camaro 2SS/RS Join Date: Oct 2009 Location: Ft Lauderdale, FL Posts: 318 View My Garage	Just received my 67" Race Ramps today. They clear the splitter, but do rub up on the rubber and plastic pieces that sit under the splitter. Going to have to order the XTenders unfortunately. I would suggest getting the 72" for the ZL1 1LE. __________________ 2018 ZL1 1LE HBM 2009 Yamaha R1 2011 Corvette Grand Sport 2010 2SS/RS Black & IOM Mods Here

07-15-2018, 01:06 AM	#21
nicktechla Drives: 2012 Porsche 911 Turbo S Join Date: Jan 2017 Location: Los Angeles, CA Posts: 1,776	So these 67" ramps rub a bit? https://www.amazon.com/Race-Ramps-RR...ace+ramp+67%22 __________________ IG: 2fast2nick -- Current -- 2012 Porsche Turbo S - PDK - Basalt Black Metallic -- Past -- 2017 Camaro ZL1 Coupe - Red Hot - A10, PDR - HRE P101 2015 Mustang GT PP - Whipple Supercharger

07-08-2020, 11:33 AM	#25
mlee CamaroFans.com Drives: ZLE & ZR2 Join Date: Oct 2008 Location: Conroe, TX Posts: 37,507 View My Garage	Needs about 4" to get on an 18' Aluma Tilt I put a couple of 12" X 1" square pieces of wood I put under the race ramps that work well. __________________

03-05-2018, 02:01 PM	#16
blk04sr Drives: N/A Join Date: Dec 2014 Location: SoCal Posts: 53	FYI they make extenders for those who have the 56" version https://raceramps.com/car-ramps/gara...amps/xtenders/

07-15-2018, 03:42 AM	#22
satanschariot666 Banned Drives: camaro Join Date: Jul 2018 Location: mexico Posts: 100	all lenghts ramps will rub dont worry about that you can even get the 56 all you need to clear it with room to spare is to find a spot where a floor is slightly offset from the pavement even the slightest rise of the front wheels will do it u can even put the cardboard the ramps came in and drive over it w the front wheels once the car is pointing up there will magically be tons of clearance

07-15-2018, 03:46 AM	#23
satanschariot666 Banned Drives: camaro Join Date: Jul 2018 Location: mexico Posts: 100	straight is an illusion things that appear straight are infact curved

07-08-2020, 06:40 PM	#26
Tyrolblue67 Drives: 2019 ZL1 Camaro Join Date: Oct 2016 Location: Motor City Posts: 196	I bit the bullet and went with the Race Ramp 80's. Plenty of clearance. Tyrolblue67

User Name		Remember Me?
Password