ZL1 Front Wheel Air Deflector part # - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Big C CamaroSS · 11-13-2013, 06:48 PM

Does anyone know the part number for the front wheel air deflector for the ZL1? These are the pieces that fit on the "front" wheel well and direct air away/around the wheel.

I want to put them on my 2013 1LE (I like the look

), but I'm not sure it will look right because the 1LE splitter doesn't end flush with the wheel well (so the air deflector will need to be bent).

Todd in Vancouver · 11-13-2013, 07:13 PM

Just ordered a set. If you Google the part number a bunch of GM sites come up selling it but I just had to find one that would ship via Canada.

Part # 22757643

Sickness91Z28 · 11-13-2013, 07:15 PM

will these fit the SS bumper?

nyrfan · 11-13-2013, 07:16 PM

Quote:

Originally Posted by Sickness91Z28

will these fit the SS bumper?

Yes. In the process of ordering a set from Maureen.

Sent from my 2SS/RS

big dave · 11-13-2013, 08:52 PM

My ZL1 didn't even come with them....I wonder why..

*Mr. Wyndham* · 11-13-2013, 08:56 PM

Your Z didn't come with the little bit of plastic riding up front of the wheel well shown in this picture?

Sickness91Z28 · 11-13-2013, 09:06 PM

Quote:

Originally Posted by nyrfan

Yes. In the process of ordering a set from Maureen.

Sent from my 2SS/RS

Post some pictures when you install them....curious what they look like on the SS bumper..

Todd in Vancouver · 11-14-2013, 12:40 AM

Quote:

Originally Posted by big dave

My ZL1 didn't even come with them....I wonder why..

There is a whole thread full of this very topic. Read this and go yell at your dealer if you bought it new.

http://www.camaro5.com/forums/showthread.php?t=195588

big dave · 11-14-2013, 03:30 AM

Quote:

Originally Posted by Mr. Wyndham

Your Z didn't come with the little bit of plastic riding up front of the wheel well shown in this picture?

No it didn't. I was at the dealership last night and noticed 1 out of the 5 ZL1s didn't have it either. Ironically, it was the one the same color as mine.

*Mr. Wyndham* · 11-14-2013, 07:50 AM

Go back. Go get them...they are a part of the ZL1's aerodynamic package...should have been on from the factory - and the dealer should have noticed they were missing.

HDRDTD · 11-14-2013, 09:47 AM

Just to be clear, there are two little (I call them winglets) that mount in front of each front wheel UNDER the front of the car. Look carefully in the picture in front of the front tire at the BOTTOM of the car.
NOT the leading edge 'mud flaps' in the front wheel well opening.

The 'winglets' are items that the dealer is supposed to install as part of PDI along with removing the front spring spaces. If you see a ZL1 in the lot, it may or may not have already gone through PDI so the winglets may not have been installed yet.

The leading edge 'mud flaps', I have no idea but I would assume THEY should already be on the car.

gblaue · 11-14-2013, 10:34 AM

Quote:

Originally Posted by Mr. Wyndham

Go back. Go get them...they are a part of the ZL1's aerodynamic package...should have been on from the factory - and the dealer should have noticed they were missing.

They are installed at the dealer during it's PDI.

*Mr. Wyndham* · 11-14-2013, 10:36 AM

Quote:

Originally Posted by HDRDTD

Just to be clear, there are two little (I call them winglets) that mount in front of each front wheel UNDER the front of the car. Look carefully in the picture in front of the front tire at the BOTTOM of the car.
NOT the leading edge 'mud flaps' in the front wheel well opening.

The 'winglets' are items that the dealer is supposed to install as part of PDI along with removing the front spring spaces. If you see a ZL1 in the lot, it may or may not have already gone through PDI so the winglets may not have been installed yet.

The leading edge 'mud flaps', I have no idea but I would assume THEY should already be on the car.

My thoughts, exactly....perhaps we are talking about two completely different things. Thanks for bringing that up HDRDTD...it doesn't make any sense for the air deflectors (forward-facing "mud flaps") to not be there as they are part of the front fascia...

*Mr. Wyndham* · 11-14-2013, 10:37 AM

Quote:

Originally Posted by gblaue

They are installed at the dealer during it's PDI.

Turns out we were talking about two different things.

I call the "forward mud flaps" air deflectors....and the pieces under the fascia: "air dams". Whoops!

11-13-2013, 06:48 PM	#1
Big C CamaroSS Drives: Black Camaro 2SS/RS 1LE Join Date: Jun 2011 Location: Belleville, Ontario, Canada Posts: 1,145	ZL1 Front Wheel Air Deflector part # Does anyone know the part number for the front wheel air deflector for the ZL1? These are the pieces that fit on the "front" wheel well and direct air away/around the wheel. I want to put them on my 2013 1LE (I like the look ), but I'm not sure it will look right because the 1LE splitter doesn't end flush with the wheel well (so the air deflector will need to be bent).

11-13-2013, 07:13 PM	#2
Todd in Vancouver Drives: 2014 ZL1 Join Date: Oct 2013 Location: Vancouver, BC Posts: 1,538 View My Garage	Just ordered a set. If you Google the part number a bunch of GM sites come up selling it but I just had to find one that would ship via Canada. Part # 22757643 __________________ Todd in Vancouver '14 ZL1 Camaro '67 Camaro SS Pro-tour in process How hard can it be... Check out my other build http://www.pro-touring.com/threads/9...ject-Obsession

11-13-2013, 07:15 PM	#3
Sickness91Z28 Reaper Crew Drives: Blown 2010 Camaro SS Join Date: Aug 2012 Location: Indiana Posts: 985	will these fit the SS bumper? __________________ 2010 Camaro SS SLP TVS2300 Blower, Blower Cam, Lingenfelter Heads, Meth Injected, 5lbs of Boost@700 BHP Pedders XA Coilovers

11-13-2013, 08:52 PM	#5
big dave Drives: 2017 ZL1 Join Date: Aug 2009 Location: Maryland Posts: 1,052	My ZL1 didn't even come with them....I wonder why.. __________________ '17 ZL1 10.99@129 stock. 4225# raceweight. Best 60'- 1.66 on factory tires. 10.48@132 E50, intake and tune. 4270 lbs https://youtu.be/EyHtdH9XOkY https://youtu.be/Lcu41obbTf8 '13 ZL1 BRM A6. 11.591 @ 119.2 factory stock with a 1.68 60'! Best stock mph 121.8. 11.29 @ 123 RotoFab, drag radials and skinnies. 4360# raceweight. http://youtu.be/yggIA3C_kkA 2014... back to stock http://youtu.be/spQLaTWbThs 2013... stock & RotoFab

11-13-2013, 08:56 PM	#6
Mr. Wyndham I used to be Dragoneye... Drives: 2018 ZL1 1LE Join Date: Jan 2007 Location: Buffalo, NY Posts: 31,876 View My Garage	Your Z didn't come with the little bit of plastic riding up front of the wheel well shown in this picture? __________________ *"Keep the faith."* - Fbodfather

11-14-2013, 07:50 AM	#10
Mr. Wyndham I used to be Dragoneye... Drives: 2018 ZL1 1LE Join Date: Jan 2007 Location: Buffalo, NY Posts: 31,876 View My Garage	Go back. Go get them...they are a part of the ZL1's aerodynamic package...should have been on from the factory - and the dealer should have noticed they were missing. __________________ *"Keep the faith."* - Fbodfather

11-14-2013, 09:47 AM	#11
HDRDTD Drives: 2013 Triple Black ZL1 Vert M6 ECF Join Date: Mar 2011 Location: Trenton, Michigan Posts: 7,047	Just to be clear, there are two little (I call them winglets) that mount in front of each front wheel UNDER the front of the car. Look carefully in the picture in front of the front tire at the BOTTOM of the car. NOT the leading edge 'mud flaps' in the front wheel well opening. The 'winglets' are items that the dealer is supposed to install as part of PDI along with removing the front spring spaces. If you see a ZL1 in the lot, it may or may not have already gone through PDI so the winglets may not have been installed yet. The leading edge 'mud flaps', I have no idea but I would assume THEY should already be on the car.