09-21-2018, 05:00 PM | #1 |
Drives: 2012 ZL1 #1329 M6 Join Date: Jun 2009
Location: Reading, PA
Posts: 1,040
|
Rapid Motorsports 396ci Build
Callies Dragonslayer Crank
Callies Ultra H Beam Rods Diamond 10.1 Pistons. Rapid Motorsports Custom Grind Cam "Last Hurrah Grind" Blower, Snout and heads are still from the old set up ported by Formato. 102mm TB and RPM 5 Inch Intake. DSX flex fuel sensor and Auxiliary Fuel Pump 2.40 upper 9.55 lower Active Chiller. PUMP 93 Tune 801rwhp 804rwtq Sheetz e85 Tune 855rwhp 854rwtq More like 70% Big Thank you to Mike for coming out of retirement to get this car where it needed to be!
__________________
2012 Camaro ZL1 #1329 M6 Summit White
Built by Mike @ Rapid Motorsports 784rwhp 757 rwtq on 93 Octane ET - 10.97 @ 128 Heads-Blower-Snout-TB ported & prepared by Jeremy Formato of FasterProms http://www.camaro5.com/forums/showthread.php?t=395950 Rapid Motorsports 396ci Build https://www.camaro5.com/forums/showt...1#post10321301 10.832 @ 130.99 |
09-21-2018, 05:52 PM | #2 |
709 RWHP & 677 RWTQ
Drives: 13' HPE 800 ZL1..... IOM vert, M6 Join Date: Feb 2013
Location: South Windsor, CT
Posts: 1,140
|
Awesome!!
__________________
11.34 @ 124.88
|
09-21-2018, 06:36 PM | #3 |
Drives: 2012 ZL1 #1329 M6 Join Date: Jun 2009
Location: Reading, PA
Posts: 1,040
|
Thanks man! Figured I make a post with a different combo.
__________________
2012 Camaro ZL1 #1329 M6 Summit White
Built by Mike @ Rapid Motorsports 784rwhp 757 rwtq on 93 Octane ET - 10.97 @ 128 Heads-Blower-Snout-TB ported & prepared by Jeremy Formato of FasterProms http://www.camaro5.com/forums/showthread.php?t=395950 Rapid Motorsports 396ci Build https://www.camaro5.com/forums/showt...1#post10321301 10.832 @ 130.99 |
09-22-2018, 07:06 AM | #4 |
BURN RUBBER NOT YOUR SOUL
Drives: 2013 ZL1 M6 Blue Ray Join Date: Jun 2017
Location: PA
Posts: 69
|
Nice numbers man. I get my E85 from Sheetz in York PA, it tested to be 80%.
__________________
Mods-Kong Ported Blower, ID1700X injectors, 2.35/8.65, TSP Ported Heads, Custom Grind Cam, RPM 5 inch Intake, NW 102mm, Kooks 1 7/8, Corsa Extreme, Afco Heat Exchanger, PNR 4 gal ice tank/EMP pump, Oil catch can, Thermal reduction plates, BR7EF plugs, DSX Aux Pump, Monster LT1-S triple. 788hp/757tq-93, 839hp/785tq-E85. Burn Rubber Not Your Soul
|
09-22-2018, 07:13 AM | #5 |
Drives: 2012 ZL1 #1329 M6 Join Date: Jun 2009
Location: Reading, PA
Posts: 1,040
|
Thanks man! Time to get it to the track again. I got mine at the Sheetz in Leesport, PA. That's what it was coming up as. I believe you though!
__________________
2012 Camaro ZL1 #1329 M6 Summit White
Built by Mike @ Rapid Motorsports 784rwhp 757 rwtq on 93 Octane ET - 10.97 @ 128 Heads-Blower-Snout-TB ported & prepared by Jeremy Formato of FasterProms http://www.camaro5.com/forums/showthread.php?t=395950 Rapid Motorsports 396ci Build https://www.camaro5.com/forums/showt...1#post10321301 10.832 @ 130.99 |
09-22-2018, 08:37 AM | #6 |
Drives: 2014-ZL1-M6-CRT, 68 camaro SS 496 Join Date: Feb 2012
Location: N.E. Pennsylvania
Posts: 262
|
Didnt you have Kong doing some port work??
__________________
2014- Crystal Red-ZL1 #1601, M6, Recaro, sunroof, Nav-stock-SOLD
1968 Camaro SS Clone- 496 BBC, Legend 5speed, 12 bolt 1970 Nova SS- 383 SBC 588hp, 200-4r, 12 bolt |
09-22-2018, 08:40 AM | #7 |
Drives: 2012 ZL1 #1329 M6 Join Date: Jun 2009
Location: Reading, PA
Posts: 1,040
|
He ported the snout to 102mm. He also did the first tune with the Cam Motion Off the shelf grind cam. All I am gonna say is, nobody tunes like Mikey.
__________________
2012 Camaro ZL1 #1329 M6 Summit White
Built by Mike @ Rapid Motorsports 784rwhp 757 rwtq on 93 Octane ET - 10.97 @ 128 Heads-Blower-Snout-TB ported & prepared by Jeremy Formato of FasterProms http://www.camaro5.com/forums/showthread.php?t=395950 Rapid Motorsports 396ci Build https://www.camaro5.com/forums/showt...1#post10321301 10.832 @ 130.99 |
09-24-2018, 06:26 PM | #8 |
Drives: 99 Trans Am Join Date: Sep 2018
Location: PA and FL
Posts: 1
|
Your car turned out amazing Andy. Always a pleasure to see you.
|
09-25-2018, 04:57 AM | #9 |
Drives: 2014 M6 ZL1 Join Date: Jan 2012
Location: Tarpon Springs, Fl
Posts: 772
|
Strong numbers Andy! I know you are smiling. Have a Blast with that thing.
Congrats Man!
__________________
15' Ashen Gray Metallic Z/28
14' Crystal Red Tintcoat ZL1 6M, 9.62 at 150.75 MPH 12' Opulent Blue Metallic CTS-V Sedan, 10.690 at 129.60 MPH - SOLD 06' LeMans Blue Metallic Z06, 11.726 at 127.80 MPH Motor - SOLD. 96' Impala SS LTx, 11.397 at 118.10 MPH Motor, 1st stage 10.526 at 127.46 MPH |
09-25-2018, 03:26 PM | #10 |
Drives: 2012 ZL1 #1329 M6 Join Date: Jun 2009
Location: Reading, PA
Posts: 1,040
|
Thanks Mike, Appreciate it!!
__________________
2012 Camaro ZL1 #1329 M6 Summit White
Built by Mike @ Rapid Motorsports 784rwhp 757 rwtq on 93 Octane ET - 10.97 @ 128 Heads-Blower-Snout-TB ported & prepared by Jeremy Formato of FasterProms http://www.camaro5.com/forums/showthread.php?t=395950 Rapid Motorsports 396ci Build https://www.camaro5.com/forums/showt...1#post10321301 10.832 @ 130.99 |
09-25-2018, 03:28 PM | #11 | |
Drives: 2012 ZL1 #1329 M6 Join Date: Jun 2009
Location: Reading, PA
Posts: 1,040
|
Quote:
Yeah, the car definitely pulls hard! I would like to get to the track yet this year, but with the work load being the way it is, I don't know yet.
__________________
2012 Camaro ZL1 #1329 M6 Summit White
Built by Mike @ Rapid Motorsports 784rwhp 757 rwtq on 93 Octane ET - 10.97 @ 128 Heads-Blower-Snout-TB ported & prepared by Jeremy Formato of FasterProms http://www.camaro5.com/forums/showthread.php?t=395950 Rapid Motorsports 396ci Build https://www.camaro5.com/forums/showt...1#post10321301 10.832 @ 130.99 |
|
09-25-2018, 05:34 PM | #12 |
Z-BEAST
Drives: 2013 JDP ZL-850 Track Spec ZL1, Join Date: Mar 2013
Location: Oregon City, OR
Posts: 1,470
|
Sweet.
|
|
|
|
|