12-22-2016, 05:07 PM | #1 |
Drives: 2020 Camaro ZL1 Convertible Join Date: May 2014
Location: Dallas, Texas
Posts: 32
|
Convertible front molding
Gang,
I need to replace the interior front molding on my 2014 ZL1 convertible. I've found the part on GM Parts direct 22766899 - but I can't tell how to remove the old one. See item #2 in the attached image. Does anyone have any experience with removal/replacement of this part?
__________________
-d00mz
2020 ZL1 Convertible in Shock -Bone stock (for now) 2017 ZL1 Convertible in Hyper Metallic Blue (sold) -stock 2014 ZL1 Convertible in Red Hot (sold) -Roto Fab Cold Air Intake with larger HX Rez -2.5inch upper pulley, solid isolator -Ported Blower Snout -ARH 2 inch headers and longflow off-road pipes -1000cc fuel injectors -NGK TR71X plugs -Catch Can -Dyno tuned to 600RWHP -All work done by Advanced Modern Performance |
12-22-2016, 07:59 PM | #2 |
Drives: 2023 2SS Convertible Join Date: May 2009
Location: Metro Detroit
Posts: 1,099
|
I don't know if I would recommend doing that yourself - you have to peel back the convertible top fabric. The screws that hold the trim part on shoot straight down.
-Geoff
__________________
'12 2SS RS Convertible - Traded in.
'16 2SS Convertible - White on white, mag-ride, NPP, nav. Sold! '23 2SS Convertible -Same as above except orange. |
12-22-2016, 09:12 PM | #3 |
Drives: 2020 Camaro ZL1 Convertible Join Date: May 2014
Location: Dallas, Texas
Posts: 32
|
That's the entire issue. Two of the tabs that the screws go into over the driver side are broken. It rattles like a mofo.
__________________
-d00mz
2020 ZL1 Convertible in Shock -Bone stock (for now) 2017 ZL1 Convertible in Hyper Metallic Blue (sold) -stock 2014 ZL1 Convertible in Red Hot (sold) -Roto Fab Cold Air Intake with larger HX Rez -2.5inch upper pulley, solid isolator -Ported Blower Snout -ARH 2 inch headers and longflow off-road pipes -1000cc fuel injectors -NGK TR71X plugs -Catch Can -Dyno tuned to 600RWHP -All work done by Advanced Modern Performance |
04-29-2018, 11:04 PM | #4 |
Yee-aay-ee!
Drives: 2015 2SS/RS CV CE Join Date: Nov 2015
Location: ORegon
Posts: 2,527
|
|
05-22-2023, 01:17 AM | #5 |
Drives: 2014 2ss camaro convertible Join Date: Dec 2013
Location: ca
Posts: 8
|
Repair convertible front plastic trim
Like many things I've suffered with in my Corvettes and Camaros over the years, the design of the trim piece is obviously flimsy and flawed, and replacement only sets you up for a frustrating identical repeat problem in the future.
Has anyone attempted to re-attach the plastic bosses with crazy glue and baking soda combination? It supposedly forms a rock solid bond to plastic I will be trying it on my 2014 2SS convertible soon and will post the results. So far no problems with the 22 ZL1, but time will tell. |
05-22-2023, 09:01 AM | #6 |
Older Than Dirt
Drives: 2010 & 2013 Camaros Join Date: Apr 2010
Location: Aiken, SC
Posts: 4,599
|
I'm not sure if this is in other areas of the forums because the search feature sucks donkey ballz. But here's a video of what it takes to take apart the top to get the trim piece off. Repair or replace, that's an option left to you. But it doesn't look too difficult.
https://youtu.be/lAqMBYLJHf4
__________________
2010 2SS TE, 1 of 822/2013 Camaro ZL1 vert, 1 of 54
|
06-11-2023, 01:06 AM | #7 | |
Yee-aay-ee!
Drives: 2015 2SS/RS CV CE Join Date: Nov 2015
Location: ORegon
Posts: 2,527
|
Quote:
__________________
|
|
06-18-2023, 08:03 AM | #8 | |
Geezerss
Drives: 2011 ss2 droptop red/blkst hckyst Join Date: Dec 2011
Location: suffolk county new york
Posts: 18
|
I purchased the part , but haven't installed it yet. I ihave a 2011 soft top. this u tube is for a 2012 soft top. don't know how much different it would be for a 2020.
The only reason i can see it breaking is driving without the cover on and the top flaps in the hole good luck |
|
06-18-2023, 08:04 AM | #9 | |
Geezerss
Drives: 2011 ss2 droptop red/blkst hckyst Join Date: Dec 2011
Location: suffolk county new york
Posts: 18
|
I purchased the part , but haven't installed it yet. I ihave a 2011 soft top. this u tube is for a 2012 soft top. don't know how much different it would be for a 2020.
The only reason i can see it breaking is driving without the cover on and the top flaps in the hole good luck |
|
06-18-2023, 08:39 PM | #10 | |
Yee-aay-ee!
Drives: 2015 2SS/RS CV CE Join Date: Nov 2015
Location: ORegon
Posts: 2,527
|
Quote:
I let it drop onto my hand and then ease it down.
__________________
|
|
06-20-2023, 08:03 AM | #11 |
Older Than Dirt
Drives: 2010 & 2013 Camaros Join Date: Apr 2010
Location: Aiken, SC
Posts: 4,599
|
I just checked the mileage on the ZL1 and it's 2,887. I thought I'd already gone over 3K by now. Hmmm. Nothing is broken...yet.
And yes, I too, do not let the top slam down on the windshield. I bring it in close, grab the handle, then guide it down the rest of the way very slowly. But I did purchase a new piece of front trim anyway to stash in the corner because if/when it ever happens, I won't be wishing I'd have bought one when they were still cheap and available. And the bonus is, if I end up getting rid of the car without using it, I can just sell it later. I know people will buy it. Because those interested in it actually would be needing it. I don't wear driving gloves when I drive it, so I've already purchased new alcantarra shifter knob, boot, and steering wheel almost 10 years ago. I see those as high-wear parts. I keep them clean, but eventually that stuff's going to wear off. Again, they'll be highly desireable parts for those that need them one day, even if I don't.
__________________
2010 2SS TE, 1 of 822/2013 Camaro ZL1 vert, 1 of 54
|
06-21-2023, 11:44 PM | #12 |
Yee-aay-ee!
Drives: 2015 2SS/RS CV CE Join Date: Nov 2015
Location: ORegon
Posts: 2,527
|
What's the part number please?
__________________
|
06-22-2023, 06:46 AM | #13 |
Older Than Dirt
Drives: 2010 & 2013 Camaros Join Date: Apr 2010
Location: Aiken, SC
Posts: 4,599
|
22766899
This is for the 2011-2015 5th gens. I don't know if it would fit the 6th gens, but I doubt it.
__________________
2010 2SS TE, 1 of 822/2013 Camaro ZL1 vert, 1 of 54
|
06-22-2023, 09:30 AM | #14 |
Older Than Dirt
Drives: 2010 & 2013 Camaros Join Date: Apr 2010
Location: Aiken, SC
Posts: 4,599
|
Additionally, the price has about doubled or more in the last few years, so might want to get them while you can.
__________________
2010 2SS TE, 1 of 822/2013 Camaro ZL1 vert, 1 of 54
|
|
|
|
|