WTB 8mm screws for door and dash kit install - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Bluestreak 2010 · 10-13-2010, 02:55 PM

Does anyone have, or know where I could get the (26) 8mm screws required for installing one of the door and dash trim kits? I know they come in the kits from GM, but I got one in IBM from dsvcustoms and they were not included.

I tried contacting Chevy Parts Plus and was told they could not get just the screws. I don't know if I could order them from my dealer, but if so I would need the part number (anyone have it?).

If anyone has a set from one of the GM kits that for some reason you don't need, please PM me with an offer!

I could probably find some suitable screws at a hardware store, but would prefer to get the ones specifically made for this just to be sure.

To be perfectly clear which ones I am referring to, its the shorter screw in the picture below:

skuttduck · 10-13-2010, 03:54 PM

Too bad you weren't closer to Michigan. There is a store up here (one in Niles) that is called Midstate Bolt and screw. You can bring them one of whatever it is then they go in the back and have whatever you want.

Moriartii · 10-13-2010, 03:58 PM

check one of my favorite places for nuts, bolts and any thing in between:
mcmaster-carr

Cheers
K

Jason@JacFab · 10-14-2010, 06:19 PM

Quote:

Originally Posted by Moriartii

check one of my favorite places for nuts, bolts and any thing in between:
mcmaster-carr

Cheers
K

+1

Bluestreak 2010 · 10-14-2010, 06:24 PM

Thanks guys, but my dad brought some home from work that did the trick. I will have pics of my installed panels tomorrow.

10-13-2010, 02:55 PM	#1
Bluestreak 2010 Drives: IBM 2010 Camaro LS Join Date: Jun 2010 Location: Indianapolis, IN Posts: 1,686 View My Garage	WTB 8mm screws for door and dash kit install Does anyone have, or know where I could get the (26) 8mm screws required for installing one of the door and dash trim kits? I know they come in the kits from GM, but I got one in IBM from dsvcustoms and they were not included. I tried contacting Chevy Parts Plus and was told they could not get just the screws. I don't know if I could order them from my dealer, but if so I would need the part number (anyone have it?). If anyone has a set from one of the GM kits that for some reason you don't need, please PM me with an offer! I could probably find some suitable screws at a hardware store, but would prefer to get the ones specifically made for this just to be sure. To be perfectly clear which ones I am referring to, its the shorter screw in the picture below:

10-13-2010, 03:54 PM	#2
skuttduck Drives: 2010 RJT 2LT Camaro Join Date: May 2009 Location: East Lansing, MI Posts: 2,530	Too bad you weren't closer to Michigan. There is a store up here (one in Niles) that is called Midstate Bolt and screw. You can bring them one of whatever it is then they go in the back and have whatever you want. __________________ Check out my Camaro http://www.camaro5.com/forums/showthread.php?t=84133

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V8 Camaro Performance Upgrades List	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	93	08-30-2021 05:56 PM
IOM Interior Trim kit install	armysig	Cosmetics and Lighting Modification Discussions	26	09-13-2011 07:21 PM
ULTIMATE PERFORMANCE* TURBO Camaro SS -- 750hp Custom Single Turbo Kit (T04Z)	Ultimate Performance	Forced Induction - V8	496	10-11-2009 01:29 PM
watch out for lazy dealers that install the ground effects kit wrong.	AutobotSS	5th Gen Camaro SS LS LT General Discussions	12	07-17-2009 01:44 PM

10-13-2010, 03:58 PM	#3
Moriartii Drives: 11 IOM 2SS/RS M6 w/Hurst Join Date: Nov 2009 Location: Austin Texas Posts: 1,269	check one of my favorite places for nuts, bolts and any thing in between: mcmaster-carr Cheers K

10-14-2010, 06:24 PM	#5
Bluestreak 2010 Drives: IBM 2010 Camaro LS Join Date: Jun 2010 Location: Indianapolis, IN Posts: 1,686 View My Garage	Thanks guys, but my dad brought some home from work that did the trick. I will have pics of my installed panels tomorrow.