MSD LS series 2-step - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

se7en · 07-25-2010, 09:42 AM

http://www.phastekperformance.com/MS...aunch-8733.htm

If so can you give some feedback?

se7en · 07-25-2010, 09:43 AM

Can anyone explain how this works exactly?

BLWN SS · 07-25-2010, 11:41 AM

Dont know that specific piece but we had an MSD 2 step module on our car race before switching to an MSD 7-AL3. It allows for a rev limiter setting for max RPMs while going down track in case you miss a shift or hold a gear to long (should get a shift light) and allows you to set and hold a lower rev limit while at the starting line, usually triggered by holding the trany brake button but you could hook it to a line lock/roll control as well. If your not drag racing you really dont need it. If you want to be menacing lined up next to a Mustang at a red light you could come up against the rev limiter, he would think twice about wanting to try you! JK

busaboy · 07-26-2010, 07:46 PM

This sound kinda like the competion mode that the car came with.

cmiller8006 · 07-26-2010, 08:44 PM

But the aftermarket ones have the ability to be adjusted. Say your on dr's, you dont need to launch at 4500rpms. You are able to set it at 22-2500 to get a better smoother launch.

BackinBlackSS/RS · 07-26-2010, 08:53 PM

Quote:

Originally Posted by cmiller8006

But the aftermarket ones have the ability to be adjusted. Say your on dr's, you dont need to launch at 4500rpms. You are able to set it at 22-2500 to get a better smoother launch.

SWEET!! Sound very cool.

Merc · 07-27-2010, 10:35 AM

Sounds just what I need to get consistent launch rpm. $219 at jegs. i will have that installed for September Street Legals when the cherry DA returns.

Merc · 07-27-2010, 10:37 AM

Quote:

Originally Posted by cmiller8006

But the aftermarket ones have the ability to be adjusted. Say your on dr's, you dont need to launch at 4500rpms. You are able to set it at 22-2500 to get a better smoother launch.

Are you sure 2500 is the upper limit?

Merc · 07-27-2010, 10:47 AM

Called MSD tech. Upper limit is 9900.

mrray13 · 07-27-2010, 11:55 AM

Quote:

Originally Posted by mercuryman96

Are you sure 2500 is the upper limit?

Quote:

Originally Posted by mercuryman96

Called MSD tech. Upper limit is 9900.

He didn't say it was the upper limit. What he was saying was that you could set it there, 2500, for a smoother launch. The factory rev limiter is 4500.

This device is all about consistant launches and that means lower 60ft times, if set right. Grab some DRs, go play at a tree. Find the sweet spot, set the limiter. Next time at the tree, stage, foot on brake/clutch, gas pedal to floor...green light(well, last yellow, depending upon tree), remove left foot!

Merc · 07-27-2010, 12:23 PM

Got DR's and all the BMR stuff already. 2 step makes life easier. Already ran 12.35 @ 113. On the fast list. 2 step already ordered. Way cool.

se7en · 07-27-2010, 12:28 PM

Will this work on both an M6 and A6?

cmiller8006 · 07-27-2010, 01:42 PM

Quote:

Originally Posted by bws_82

Will this work on both an M6 and A6?

There is something you can get for a stalled auto. Won't work well if at all on a regular stall the car comes with.

BMR guy · 07-27-2010, 03:47 PM

We have one on our Project TriloG test car and it works great. Spend the money, you won't regret it!

07-25-2010, 09:42 AM	#1
se7en Drives: 10 Procharged SS Join Date: Oct 2009 Location: The creek at the end of the dead end road Posts: 1,857	Has anyone tried this yet? http://www.phastekperformance.com/MS...aunch-8733.htm If so can you give some feedback?

07-26-2010, 08:44 PM	#5
cmiller8006 Drives: 2009 Cobalt SS/TC Join Date: Sep 2009 Location: Sandusky, Ohio Posts: 368	But the aftermarket ones have the ability to be adjusted. Say your on dr's, you dont need to launch at 4500rpms. You are able to set it at 22-2500 to get a better smoother launch. __________________ 2009 Cobalt SS/TC: 10.89 at 133mph

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hurst BFGoodrich Redline Series Turbo Camaro V6 Announced	Tran	5th Gen Camaro SS LS LT General Discussions	112	05-29-2011 11:33 AM
Cant wait Granatelli Racing Parts	BATOUTOFHELL	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	39	08-23-2010 09:14 PM
P0300 Misfire Code Help	black-knight	4th Generation Camaros	4	02-08-2010 02:45 PM
Holley LS Fest, September 10-12, 2010	Pro Stock John	USA - Great Lakes	1	01-28-2010 09:18 AM

07-25-2010, 09:43 AM	#2
se7en Drives: 10 Procharged SS Join Date: Oct 2009 Location: The creek at the end of the dead end road Posts: 1,857	Can anyone explain how this works exactly?

07-25-2010, 11:41 AM	#3
BLWN SS Drives: Orange SS/RS W/ White Stripes Join Date: Feb 2010 Location: Colorado Springs Posts: 252	Dont know that specific piece but we had an MSD 2 step module on our car race before switching to an MSD 7-AL3. It allows for a rev limiter setting for max RPMs while going down track in case you miss a shift or hold a gear to long (should get a shift light) and allows you to set and hold a lower rev limit while at the starting line, usually triggered by holding the trany brake button but you could hook it to a line lock/roll control as well. If your not drag racing you really dont need it. If you want to be menacing lined up next to a Mustang at a red light you could come up against the rev limiter, he would think twice about wanting to try you! JK

07-26-2010, 07:46 PM	#4
busaboy Drives: Black RS/SS M6 Join Date: Jun 2009 Location: TX Posts: 233	This sound kinda like the competion mode that the car came with.

07-27-2010, 10:35 AM	#7
Merc In The Circle Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009 Location: Abbotsford BC Canada Posts: 11,310	Sounds just what I need to get consistent launch rpm. $219 at jegs. i will have that installed for September Street Legals when the cherry DA returns.

07-27-2010, 10:47 AM	#9
Merc In The Circle Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009 Location: Abbotsford BC Canada Posts: 11,310	Called MSD tech. Upper limit is 9900.

07-27-2010, 12:23 PM	#11
Merc In The Circle Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009 Location: Abbotsford BC Canada Posts: 11,310	Got DR's and all the BMR stuff already. 2 step makes life easier. Already ran 12.35 @ 113. On the fast list. 2 step already ordered. Way cool.

07-27-2010, 12:28 PM	#12
se7en Drives: 10 Procharged SS Join Date: Oct 2009 Location: The creek at the end of the dead end road Posts: 1,857	Will this work on both an M6 and A6?

07-27-2010, 03:47 PM	#14
BMR guy Drives: 2010 1SS Join Date: Jan 2010 Location: Tampa, FL Posts: 1,002	We have one on our Project TriloG test car and it works great. Spend the money, you won't regret it!