Any body have FAST INTAKE manifold in L99 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

sub zero · 10-18-2010, 04:32 PM

hi everyone..

i have on my L99 (CAI , CATBACK , UNDERDRIVE PULLY)
but i'm thinking aboute incresing my power...

so , i think now about FAST INTAKE monifold...

so, any body have this on his L99 , i want to know about the power or how hp gain from it , i know it's give the engine more cold air , but i'm intrested about the power , my friend have it on LS3 and he feeling good with it , but i don't know if it's work with my L99 same as LS3.

Jon@Texas-Speed · 10-18-2010, 04:57 PM

It will have decent gains over the factory intake. Not anything crazy but it will pick up some over the GM intake. We have engine dyno tested them on the LS3 and they seem to be on par with a ported stock intake on those motors. I would expect the same from the L99 as well. I would say you would be looking 10 HP increase or so best case on an otherwise stock/bolt-on car.

Jon

axis · 10-18-2010, 11:13 PM

So basically you're paying $100/HP, and that's best case scenario. Not the first thing i'd do when looking for HP. If you were going FI or big radical cam, it might be worthwhile. That $1k would be better spent on something else, like headers.

GMRULZ · 10-19-2010, 06:50 AM

Unless you are changing the cam on the L99 you will pick up next to nothing. ADM put one on a bolt-on L99 and I think it picked up 3rwhp. The stock intake is more than enough for the tiny little bumpstick the L99 has. Add a nice aggresive cam and the FAST will shine. The LS3 does gain a bit and is a decent mod w/ the stock cam.

Fredrick_navaro · 08-30-2017, 02:17 PM

Hey guys I know I'm probably just a little late but I wanted to know if it would be worth it on my end on getting the LsX intake manifold? I have CAÍ, longtube headers, and stage 1 tsp cam. You're guys help would really be appreciated!

jc615 · 08-30-2017, 03:07 PM

Just get your intake ported and a rod mod. Half the cost and will perform better

10-18-2010, 04:32 PM	#1
sub zero Drives: RED@2SS Join Date: Aug 2010 Location: UAE Posts: 1,372	Any body have FAST INTAKE manifold in L99 hi everyone.. i have on my L99 (CAI , CATBACK , UNDERDRIVE PULLY) but i'm thinking aboute incresing my power... so , i think now about FAST INTAKE monifold... so, any body have this on his L99 , i want to know about the power or how hp gain from it , i know it's give the engine more cold air , but i'm intrested about the power , my friend have it on LS3 and he feeling good with it , but i don't know if it's work with my L99 same as LS3. __________________

10-18-2010, 11:13 PM	#3
axis Search Ninja Drives: 2010 Black 2SS/RS A6 Join Date: Oct 2009 Location: Central Ark Posts: 7,183	So basically you're paying $100/HP, and that's best case scenario. Not the first thing i'd do when looking for HP. If you were going FI or big radical cam, it might be worthwhile. That $1k would be better spent on something else, like headers. __________________ 2010 Black 2SS/RS A6 Halltech CF 102 fed GPI modded intake manifold Bo (knows) White ported TB Kooks LT's/ Dynomax VT Pfadted (springs/sways) Dyno tuned by Rhino and GPI I once parallel parked a train.

10-19-2010, 06:50 AM	#4
GMRULZ Drives: 2010 SS & 2008 C6 Join Date: Mar 2008 Location: VA Posts: 1,819	Unless you are changing the cam on the L99 you will pick up next to nothing. ADM put one on a bolt-on L99 and I think it picked up 3rwhp. The stock intake is more than enough for the tiny little bumpstick the L99 has. Add a nice aggresive cam and the FAST will shine. The LS3 does gain a bit and is a decent mod w/ the stock cam. __________________ 2010 SS L99, 536rwhp 10.843@126.72. Whipple Supercharger stock pulley, ARH 1 7/8 longtubes w/ catted xpipe, magnaflow 3" mufflers, ADM Race CAI, 3:70 gears, lightweight wheels and nitto drag radials. Stock internal L99, stock converter. Bolt on best before blower 12.22@113.29 w/ nothing but ARH headers, catted x-pipe, ADM CAI and a tune on stock Pzero`s! Other car 2008 C6 Ls3, z51, A6, Npp Exhaust, best bonestock pass 11.80@118.82, Number 2 on the Corvette Forums Bonestock fastest list..

08-30-2017, 02:17 PM	#5
Fredrick_navaro Drives: 2014 camaro SS Join Date: Apr 2016 Location: Anaheim, Ca Posts: 2	Intake manifold for l99 Hey guys I know I'm probably just a little late but I wanted to know if it would be worth it on my end on getting the LsX intake manifold? I have CAÍ, longtube headers, and stage 1 tsp cam. You're guys help would really be appreciated!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LS3 engine specifications	Tran	Wiki	3	10-06-2010 11:56 PM
what is purpose of FAST INTAKE 102mm ?	sub zero	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	19	09-28-2010 10:09 AM
PORTED THROTTLE BODY and INTAKE MANIFOLD	ablackburn99	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	29	07-19-2010 05:16 PM
L99 Throttle body question	tsears	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	0	04-28-2010 12:46 AM
L99 engine specifications	Tran	Wiki	0	10-19-2008 12:40 PM

10-18-2010, 04:57 PM	#2
Jon@Texas-Speed Drives: 01 SS Camaro / 07 Silverado Join Date: May 2009 Location: Lubbock, TX Posts: 197	It will have decent gains over the factory intake. Not anything crazy but it will pick up some over the GM intake. We have engine dyno tested them on the LS3 and they seem to be on par with a ported stock intake on those motors. I would expect the same from the L99 as well. I would say you would be looking 10 HP increase or so best case on an otherwise stock/bolt-on car. Jon

08-30-2017, 03:07 PM	#6
jc615 Account Suspended Drives: Camaro and Sierra Join Date: Jul 2012 Location: Virginia Posts: 794	Just get your intake ported and a rod mod. Half the cost and will perform better