FS: Silver Door Panels (SOLD) - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

*TAG UR IT* · 12-24-2010, 12:31 AM

Just like it says, I have two stock silver door panels for sale. They were taken out of another C5 members car and were sold to me as I needed them for core replacements when I was getting my door panels done for carbon fiber. Well, we (DSVCustoms and I) decided to go another route and instead of doing door panels, we are going with a center console deal. That means I have no more use for the door panels I just purchased. They are ABL ready....just need the lights and light pipes.

Looking for $200....anyone interested in either redoing their cloth doors into ABL or using them for some other type of painted custom deal, just let me know.

They could easily be installed in a door panel, wired up, and would look like stock.

jhmurphy · 12-24-2010, 06:19 AM

PM sent

*TAG UR IT* · 12-27-2010, 01:03 AM

ajt · 12-27-2010, 10:01 PM

Do they come with the dash pieces and mounting hardware?

*TAG UR IT* · 12-27-2010, 10:57 PM

Nope.

it's just the door panels and directions on installation. I recall someone saying you just need to get the screws for it but can't remember where that thread went. There's no ABL pipes or lights. It's just the panels.

You can get the blue lights for $12 each at GM parts, the light pipe from 2SSRS for $22 each, the driver side dash panel for about $40 and passenger for $64 from GM parts (at cost which is how I get them).

The door panels, however, are the most expensive part to pick up. You have to pay something like $325 to get the panels elsewhere.

Once I get the panels sold and my new dash panels come in, I'm going to show everyone how to install dash ABL the CORRECT way. I FINALLY figured it out. It's not hard to do AT ALL. We did it on Mikes Camaro and requires no drilling or anything. Just a few easy connections and whammo...dash ABL.

If anyone wants silver door ABL panels, they are ready to go! In the box and ready to ship!

$200 SHIPPED.

*TAG UR IT* · 12-30-2010, 09:52 AM

Who wants'em!

Big Rob · 12-30-2010, 10:10 AM

Are there any scratches or dings on them?

*TAG UR IT* · 12-30-2010, 12:08 PM

Nope. No dings or scratches. ...just the scratches around the bolt holes, but none of that will be seen. It's on the outer side of the panel. Should anyone need pictures, I can unwrap the panels from the bubble wrap and show you.

73vette · 12-30-2010, 11:59 PM

Do you have the dash pieces also?

*TAG UR IT* · 12-31-2010, 12:05 AM

Quote:

Originally Posted by 73vette

Do you have the dash pieces also?

No. You can get those for your local GM parts store at cost for about $100.00.

....that is, unless you are willing to take a partially sanded passenger and driver side dash piece. You can either repaint the backs of them or use them as is for dash ABL. Only the very top and 2mm down are sanded.

ajt · 12-31-2010, 11:59 AM

Quote:

Originally Posted by TAG UR IT

No. You can get those for your local GM parts store at cost for about $100.00.

....that is, unless you are willing to take a partially sanded passenger and driver side dash piece. You can either repaint the backs of them or use them as is for dash ABL. Only the very top and 2mm down are sanded.

Can you post pics of the dash pieces?

*TAG UR IT* · 01-01-2011, 08:24 PM

Sure thing. Give me a couple and I'd be happy to get them up.

Heck...

I'll even toss in ALL the dash pieces I have just so I can get them off my hands. I know what I'm going to do and won't need them anymore.

I have two passenger pieces (one beige and one silver - both sanded at the top) and I will have one driver side piece (that is also sanded at the top).

I will be happy to post pictures but will need to pull them first and get them set up. Haven't had time.

unrestrictedmotorsports · 01-02-2011, 10:10 AM

PM SEND

*TAG UR IT* · 01-02-2011, 11:50 AM

PM Answered. I'll get pix up asap.

12-24-2010, 12:31 AM	#1
TAG UR IT www.Camaro5store.com Drives: 2014 ZL1 #705 Join Date: Jul 2006 Location: SA, Texas Posts: 26,544 View My Garage	FS: Silver Door Panels (SOLD) Just like it says, I have two stock silver door panels for sale. They were taken out of another C5 members car and were sold to me as I needed them for core replacements when I was getting my door panels done for carbon fiber. Well, we (DSVCustoms and I) decided to go another route and instead of doing door panels, we are going with a center console deal. That means I have no more use for the door panels I just purchased. They are ABL ready....just need the lights and light pipes. Looking for $200....anyone interested in either redoing their cloth doors into ABL or using them for some other type of painted custom deal, just let me know. They could easily be installed in a door panel, wired up, and would look like stock.

12-24-2010, 06:19 AM	#2
jhmurphy Drives: Grey Beast Join Date: Jul 2009 Location: Florida Posts: 591	PM sent __________________ 2SS/RS A6 and some go faster parts

12-30-2010, 11:59 PM	#9
73vette Drives: 2010 Camaro LS, 1973 Corvette Join Date: Dec 2010 Location: Olathe, KS Posts: 807 View My Garage	Do you have the dash pieces also? __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
silver boring?	iyam_lorne	5th Gen Camaro SS LS LT General Discussions	128	03-27-2010 10:01 PM
Master list of in stock/inbound Camaros @ Rockmont	Frank in MD	Dealer Camaros for Sale	19	03-10-2010 05:17 PM
Silver stripes on Silver?	iyam_lorne	5th Gen Camaro SS LS LT General Discussions	9	12-31-2009 10:06 PM
Dealer uses My sold order to stock Showroom	Saving41	5th Gen Camaro SS LS LT General Discussions	279	05-27-2009 06:05 PM
Silver has been dethroned...	KILLER74Z28	General Automotive + Other Cars Discussion	16	01-25-2008 01:28 PM

12-27-2010, 01:03 AM	#3
TAG UR IT www.Camaro5store.com Drives: 2014 ZL1 #705 Join Date: Jul 2006 Location: SA, Texas Posts: 26,544 View My Garage

12-27-2010, 10:01 PM	#4
ajt Drives: '10 Camaro 1LT SIM Join Date: Apr 2010 Location: Terre Haute, IN Posts: 157	Do they come with the dash pieces and mounting hardware?

12-27-2010, 10:57 PM	#5
TAG UR IT www.Camaro5store.com Drives: 2014 ZL1 #705 Join Date: Jul 2006 Location: SA, Texas Posts: 26,544 View My Garage	Nope. it's just the door panels and directions on installation. I recall someone saying you just need to get the screws for it but can't remember where that thread went. There's no ABL pipes or lights. It's just the panels. You can get the blue lights for $12 each at GM parts, the light pipe from 2SSRS for $22 each, the driver side dash panel for about $40 and passenger for $64 from GM parts (at cost which is how I get them). The door panels, however, are the most expensive part to pick up. You have to pay something like $325 to get the panels elsewhere. Once I get the panels sold and my new dash panels come in, I'm going to show everyone how to install dash ABL the CORRECT way. I FINALLY figured it out. It's not hard to do AT ALL. We did it on Mikes Camaro and requires no drilling or anything. Just a few easy connections and whammo...dash ABL. If anyone wants silver door ABL panels, they are ready to go! In the box and ready to ship! $200 SHIPPED.

12-30-2010, 09:52 AM	#6
TAG UR IT www.Camaro5store.com Drives: 2014 ZL1 #705 Join Date: Jul 2006 Location: SA, Texas Posts: 26,544 View My Garage	Who wants'em!

12-30-2010, 10:10 AM	#7
Big Rob Drives: ???? Join Date: Jul 2009 Location: Arizona Posts: 253	Are there any scratches or dings on them?

12-30-2010, 12:08 PM	#8
TAG UR IT www.Camaro5store.com Drives: 2014 ZL1 #705 Join Date: Jul 2006 Location: SA, Texas Posts: 26,544 View My Garage	Nope. No dings or scratches. ...just the scratches around the bolt holes, but none of that will be seen. It's on the outer side of the panel. Should anyone need pictures, I can unwrap the panels from the bubble wrap and show you.

01-01-2011, 08:24 PM	#12
TAG UR IT www.Camaro5store.com Drives: 2014 ZL1 #705 Join Date: Jul 2006 Location: SA, Texas Posts: 26,544 View My Garage	Sure thing. Give me a couple and I'd be happy to get them up. Heck... I'll even toss in ALL the dash pieces I have just so I can get them off my hands. I know what I'm going to do and won't need them anymore. I have two passenger pieces (one beige and one silver - both sanded at the top) and I will have one driver side piece (that is also sanded at the top). I will be happy to post pictures but will need to pull them first and get them set up. Haven't had time.

01-02-2011, 10:10 AM	#13
unrestrictedmotorsports Drives: 2011 Comp 6 Turbo Join Date: Oct 2009 Location: Phoenix Posts: 307	PM SEND

01-02-2011, 11:50 AM	#14
TAG UR IT www.Camaro5store.com Drives: 2014 ZL1 #705 Join Date: Jul 2006 Location: SA, Texas Posts: 26,544 View My Garage	PM Answered. I'll get pix up asap.