315/40-18 Drag Radials on 18" Forgestar Wheels - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Nine Ball · 01-22-2011, 06:50 PM

One of my happy customers sent me these photos of his Camaro. He earlier purchased the set of Modulare H1 forged wheels (shown on front of car), but also needed a set of rear drag wheels for the occasional visit to the track. We decided on the Forgestar F14 wheels in 18x11 sizing, for a few reasons.

-They are lightweight
-They are inexpensive
-They fit the Camaro properly, even clearing the SS Brembo brakes
-They kinda matched his forged wheels

The tire he went with is the Nitto NT05-R Drag radial, size 315/40-18. His car is lowered on Pfadt coil-overs. With his Magnacharger under the hood, no doubt these drag radials will help him with traction issues.

Stay tuned, in a couple weeks we'll have the wheels in for member Dangeruss. He is going 18s front AND rear! Should look killer and all business.

Thanks for the photos Alan!

Tony

Nine Ball · 01-23-2011, 04:58 PM

Here is a side view photo.

stubby · 01-23-2011, 06:54 PM

I'm lovin both the look & performance of this combo

. The fit, finish, concave look & light weight of this wheel is awesome. Although I've only had a chance to take them to the strip once, my 60' time came down by 0.2 seconds (see the thread below). I can't wait to get another chance to head back out to the track, as there is alot more car than driver at this stage of the game.

Thanks again for hooking me up with quality street & track wheels, but most especially for the personal service & expertise

.

http://www.camaro5.com/forums/showthread.php?t=123305

Mike TexaSS · 01-23-2011, 07:04 PM

Looks good Tony! Very light wheel.

Dangeruss · 01-24-2011, 01:35 AM

Looks great Tony! Where are mine?

EDIT: LOL! I didn't see the bottom of the post. Still two weeks away?

Nine Ball · 01-24-2011, 10:19 AM

Quote:

Originally Posted by Dangeruss

Looks great Tony! Where are mine?

EDIT: LOL! I didn't see the bottom of the post. Still two weeks away?

PM sent

Dangeruss · 01-24-2011, 10:58 AM

Quote:

Originally Posted by Nine Ball

PM sent

Thanks Tony. I can't wait to get these on and get out to the track.

flht99b · 01-24-2011, 03:57 PM

The all Titanium finish looks great. Is that an extra cost color or will it be one of the standard colors for 2011 ??
Ed M.

Nine Ball · 01-24-2011, 05:32 PM

Titanium was a standard finish for early 2010, but was discontinued due to them having issues with color matching the finish in batches. It is a two-stage finish, with a black basecoat and semi-transparent silver outer coat. It is no longer available. For 2011, only single stage colors will be offered.

woodside783 · 01-26-2011, 02:15 PM

how mutch for this setup?

cpssr · 01-28-2011, 09:51 AM

Can you pm me a quote for these front and back please.

bradshowG8 · 01-28-2011, 10:56 AM

Wow, so these are 18" and clear the front Brembos. I would be needing a slightly different offset in the rear. Can you PM me a price on 2 18x9 +38 and 2 18x10 +45.

Crap, I just realized that the fronts are not the same type of wheel, but in the case of the rear wheels above, will they fit over the FRONT brembos?

Nine Ball · 01-28-2011, 11:48 AM

Bradshow, the 18x9 wheels will fit up front no problem. I test-fit some 18x10 though, and they do not fit the fronts. The lip runs right into the upper bolted area of the steering knuckle.

Dangeruss · 01-28-2011, 11:52 AM

Quote:

Originally Posted by woodside783

how mutch for this setup?

Quote:

Originally Posted by cpssr

Can you pm me a quote for these front and back please.

Hey guys...Nine Ball is running a special on these wheels. Only $300.00 for the set including tires! But it only lasts for...oops...just ended.

Sorry Tony...just messing with ya!

01-22-2011, 06:50 PM	#1
Nine Ball Drives: 1969 & 2016 Camaro SS Join Date: Oct 2008 Location: Houston, TX Posts: 3,849	315/40-18 Drag Radials on 18" Forgestar Wheels One of my happy customers sent me these photos of his Camaro. He earlier purchased the set of Modulare H1 forged wheels (shown on front of car), but also needed a set of rear drag wheels for the occasional visit to the track. We decided on the Forgestar F14 wheels in 18x11 sizing, for a few reasons. -They are lightweight -They are inexpensive -They fit the Camaro properly, even clearing the SS Brembo brakes -They kinda matched his forged wheels The tire he went with is the Nitto NT05-R Drag radial, size 315/40-18. His car is lowered on Pfadt coil-overs. With his Magnacharger under the hood, no doubt these drag radials will help him with traction issues. Stay tuned, in a couple weeks we'll have the wheels in for member Dangeruss. He is going 18s front AND rear! Should look killer and all business. Thanks for the photos Alan! Tony __________________ Fquick.com/NineBall

01-23-2011, 04:58 PM	#2
Nine Ball Drives: 1969 & 2016 Camaro SS Join Date: Oct 2008 Location: Houston, TX Posts: 3,849	Here is a side view photo. Attached Images __________________ Fquick.com/NineBall

01-23-2011, 06:54 PM	#3
stubby Drives: 2014 Z28 & 2014 C7 z51 Join Date: Jul 2010 Location: Spring, Tx Posts: 57	Thanks Again Nine Ball I'm lovin both the look & performance of this combo. The fit, finish, concave look & light weight of this wheel is awesome. Although I've only had a chance to take them to the strip once, my 60' time came down by 0.2 seconds (see the thread below). I can't wait to get another chance to head back out to the track, as there is alot more car than driver at this stage of the game. Thanks again for hooking me up with quality street & track wheels, but most especially for the personal service & expertise. http://www.camaro5.com/forums/showthread.php?t=123305

01-24-2011, 03:57 PM	#8
flht99b Drives: 2010 Camaro 2SS/RS RJT Join Date: May 2009 Location: Knoxville Posts: 1,584 View My Garage	The all Titanium finish looks great. Is that an extra cost color or will it be one of the standard colors for 2011 ?? Ed M. __________________ RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter, SS brake lines ZLI calipers, rotors/pads BMR Trailing & Toe Arms, rear cradle/diff bushes, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, GTO clutch reservoir, LS9 cam, Comp valve springs, Melling 10296 oil pump, CR5 timing chain, LS6 damper, CAI Cold Air Intake, ARH LT headers, HF cats, GMPP axle back, Elite Eng Catch Can, Black ZL1 20x10 & 2011 whls 285/35/20 & 305/35/20 General G-Max RS, 2011 Convertible spoiler, 1LE front spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat, wrapped console, hand brake lever, Grant steering whl.

01-24-2011, 05:32 PM	#9
Nine Ball Drives: 1969 & 2016 Camaro SS Join Date: Oct 2008 Location: Houston, TX Posts: 3,849	Titanium was a standard finish for early 2010, but was discontinued due to them having issues with color matching the finish in batches. It is a two-stage finish, with a black basecoat and semi-transparent silver outer coat. It is no longer available. For 2011, only single stage colors will be offered. __________________ Fquick.com/NineBall

01-23-2011, 07:04 PM	#4
Mike TexaSS Drives: 454 LS7 Camaro SS Join Date: Jun 2009 Location: Houston Posts: 380	Looks good Tony! Very light wheel.

01-24-2011, 01:35 AM	#5
Dangeruss Bayoucitymusclecars.com Drives: Camaro LSX Join Date: Jul 2009 Location: Spring, TX Posts: 4,413 View My Garage	Looks great Tony! Where are mine? EDIT: LOL! I didn't see the bottom of the post. Still two weeks away?

01-26-2011, 02:15 PM	#10
woodside783 Casey Woodside Drives: a very fun car Join Date: Jun 2010 Location: Tn Posts: 1,906	how mutch for this setup?

01-28-2011, 09:51 AM	#11
cpssr Drives: 2010 2SS/RS Join Date: Jan 2010 Location: Haughton, LA Posts: 292	Can you pm me a quote for these front and back please.

01-28-2011, 10:56 AM	#12
bradshowG8 Drives: 09 Pontiac G8 Join Date: Jul 2010 Location: Norman, OK Posts: 53	Wow, so these are 18" and clear the front Brembos. I would be needing a slightly different offset in the rear. Can you PM me a price on 2 18x9 +38 and 2 18x10 +45. Crap, I just realized that the fronts are not the same type of wheel, but in the case of the rear wheels above, will they fit over the FRONT brembos? __________________ smokeindustriesinc.com

01-28-2011, 11:48 AM	#13
Nine Ball Drives: 1969 & 2016 Camaro SS Join Date: Oct 2008 Location: Houston, TX Posts: 3,849	Bradshow, the 18x9 wheels will fit up front no problem. I test-fit some 18x10 though, and they do not fit the fronts. The lip runs right into the upper bolted area of the steering knuckle. __________________ Fquick.com/NineBall

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What song are you listening to right now	Muscle Master	Off-topic Discussions	6760	11-08-2025 02:54 AM
18" drag radials	tom692010	Dragstrip and Launch Techniques Discussion	3	06-28-2010 01:19 PM
SLP 2010 Camaro ZL575 supercharged -- unique aero parts & "SS" on grill	nUcLeArEnVoY	Camaro Photos \| Spyshots \| Video \| Media Gallery	129	04-22-2010 03:59 PM
When will we see affordable drag wheels?	jrpxxii	Wheels and Tires Talk Sponsored by The Tire Rack	16	03-27-2010 06:00 PM