![]() |
|
|
#1 |
![]() |
Hi ,
So i just installed Borla S type exhuast today. It sounds awesome. however when i had my friend sitting next to me i was trying to talk but the drone was little loud especially when i go above 2,000 RPM . So i decided to shift really fast it actually eliminated a lot of drone as long as i keep it around 1500-1700 RPM. Then i hit above 70 on speed meter (6th gear) i started to hear this annoying noises . My question is if i get a tune up will it reduce the drone slightly lower? Btw i don't have header installed , but the shop still recommended me to do it .Should i do it? What your opinions? Thanks for reading this
|
|
|
|
|
|
#2 |
|
E.B.A.H.
Drives: you wild... Join Date: Mar 2007
Location: In the happy padded room wearing a jacket that makes me hug myself...
Posts: 18,420
|
I've heard that all borla's drone. I have never owned a borla kit, so I'm only going on hearsay. I'm pretty sure it has to do with the piping and mufflers moreso than anything else. I'm not sure a tune will help with drone at all. Maybe a tiny bit.
|
|
|
|
|
|
#3 |
![]() ![]() ![]() ![]() ![]() Drives: 2010 Camaro 2SS/RS Join Date: Dec 2009
Location: Grand Prairie, Texas
Posts: 1,609
|
Most people get drone below 2000 rpm's. Are you sure you don't have an exhaust leak? That would make it louder the faster you went.
__________________
94 Firebird Formula (Drowned 08/30/05)
2010 IBM 2SS/RS 6M Arrived 3/25/10. ADM CAI, Borla Type S Cat Back, VMAX Ported TB, LG Short Throw Shifter, 1LE Shocks, Hotchkis Sway Bars, Whiteline Cradle Bushing Inserts, Custom Powdercoated ZL1's ,Michelin Pilot Supersports, Stainless Power Headers, Solo J Pipes, AAC LED Sidemarkers, ZL1 Rockers, SLP Splitter, ADM Stage II Cam,ZL1 Diffuser,Vitesse Throttle Controller. |
|
|
|
|
|
#4 |
|
n116
Drives: 2010 2SS YELLOW TRANSFORMER AUTO Join Date: Mar 2010
Location: SAN ANGELO TX
Posts: 632
|
My axleback has a sound at around 1800 rpm.(l99) Any rpm above or below the sound is perfect!!!! After the third time of driving with the borlas I do not even notice the 1800 rpm sound. The borla "S" is a nice low rumble.
|
|
|
|
|
|
#5 |
![]() ![]() ![]() ![]() |
The tone will mellow out in a while, but you will always have some drone around 75-80 mph.
|
|
|
|
|
|
#6 |
![]() Drives: 2SS with RS and Ground Effects Join Date: May 2009
Location: Orange County, California
Posts: 272
|
talk louder
__________________
JBA full system, RotoFab CAI and w/w relocated, ADM scoop, tune, NLP spoiler....more to come
|
|
|
|
|
|
#7 |
|
v It bites.
Drives: 2011 IBM 2SS/RS Join Date: May 2008
Location: Orlando, FL
Posts: 3,580
|
ehh, never bothered me ...If I have the music on AT ALL, I do not hear the exhaust. I will be curious to see how much that changes with LTs.
__________________
2011 2SS/RS
Performance: 439 RWHP: 226/236 Comp Cam, Kooks 1-7/8, CAInc, Borla S type, Vmax TB, Rx Catch Can, Trans cooler, SLP 160 termo, Melling high volume, Eibach Springs/Sways 1" drop, Whiteline complete bushing kit. |
|
|
|
|
|
#8 |
![]() Drives: 07_tundra/08_zo6 Join Date: Jun 2009
Location: Wichita falls, tx
Posts: 722
|
Ive got mine on with Highflow cats. Wasn't loud enough with just the borla catback so I added the high flow cats. The first month of driving it was annoying but only in the 70-77 mph range. You just need to get used to it and I've had mine on for over a year now.
|
|
|
|
|
|
#9 |
|
Blowin the doors off!
Drives: A 2013 SS RS 6M SR Join Date: Apr 2010
Location: Phoenix, AZ
Posts: 2,390
|
Hated that drone so I did he hemholtz fix and LOVE it. Zero drone and no " you'll get used to it " or " turn the music up " cops outs....
__________________
2G1FS1EWXD9163847 |
|
|
|
|
|
#10 |
![]() Drives: 2012 ZL1 Join Date: Jun 2008
Location: Metro Detroit, MI
Posts: 604
|
|
|
|
|
|
|
#11 | |
|
v It bites.
Drives: 2011 IBM 2SS/RS Join Date: May 2008
Location: Orlando, FL
Posts: 3,580
|
Quote:
Does the "I bought a V8, not a honda" cop out work?
__________________
2011 2SS/RS
Performance: 439 RWHP: 226/236 Comp Cam, Kooks 1-7/8, CAInc, Borla S type, Vmax TB, Rx Catch Can, Trans cooler, SLP 160 termo, Melling high volume, Eibach Springs/Sways 1" drop, Whiteline complete bushing kit. |
|
|
|
|
|
|
#12 | ||
|
Blowin the doors off!
Drives: A 2013 SS RS 6M SR Join Date: Apr 2010
Location: Phoenix, AZ
Posts: 2,390
|
Quote:
Quote:
__________________
2G1FS1EWXD9163847 |
||
|
|
|
|
|
#13 |
![]() Drives: 2010 Camaro SS Join Date: Jan 2011
Location: Petawawa, ON
Posts: 151
|
Make sure the pipes are not touching the chassis cross brace. This was my problem for awhile and the drone was bad since it was actually in contact with the chassis. Once it was repositioned the drone went down quite a bit.
|
|
|
|
|
|
#14 |
![]() Drives: 07_tundra/08_zo6 Join Date: Jun 2009
Location: Wichita falls, tx
Posts: 722
|
The supercharger is my newest mod, I have had them on for ocer a year now and the supercharger has been on for 2 months now.
|
|
|
|
|
|
|
|
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Thoughts before choosing a Borla Exhaust.... | southerncarparts | V8 Bolt-Ons & Tunes | 100 | 12-15-2022 03:45 AM |
| V8 Camaro Aftermarket Exhaust Video Clips Compilation | tjbusa | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 591 | 07-06-2022 09:38 AM |
| Please help me choose.... | sfgiantsfan9 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 25 | 11-22-2010 11:34 AM |
| Borla headers install w/ stock cats and borla "s" type exhaust | Jojo | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 2 | 11-20-2010 07:26 PM |
| Borla Headers + Borla S Type Exhaust | DON GIOVANNI | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 7 | 05-05-2009 11:56 AM |