2010 Rear SS Emblem Alignment Hole Measurement Question - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Blue Demon · 02-19-2011, 04:55 PM

Does anyone who has removed their 2010 rear SS emblem know what the measurement between the alignment holes is? I want to remove the stock SS emblem and replace it with a LS3 emblem but I want to be sure the LS3 emblem will cover the SS alignment holes first. Thanks!

*Milk 1027* · 02-19-2011, 04:57 PM

There are no holes behind the SS badges.

Blue Demon · 02-19-2011, 05:02 PM

Okay, thanks, I was told both the rear bowtie and SS emblems had alignment holes for the 2010 model.

TripleB · 02-19-2011, 05:07 PM

My rear SS was stuck on with 3M double sided molding tape. I just put some blue painter's masking tape around the SS so I knew where to put my new ones.

Andro · 02-19-2011, 05:07 PM

Quote:

Originally Posted by Blue Demon

Okay, thanks, I was told both the rear bowtie and SS emblems had alignment holes for the 2010 model.

Nope the rear bowtie has holes but the ss is two way taped on

camarocpa · 02-23-2011, 08:25 AM

So no one has the measurement?

Darth_Emma · 02-23-2011, 06:43 PM

The holes are 3 15/16" apart center to center. The total spacing from edge to edge is 4 1/4" behind the bowtie.

I replaced by bowties and I got the measurments off the pins on the back of the bowtie from the back of my 2010 SS.

Kwik · 02-23-2011, 07:03 PM

He's asking about the SS emblems. I don't think there are holes for them, only the bowtie.

MillerTime · 02-23-2011, 07:07 PM

Quote:

Originally Posted by camarocpa

So no one has the measurement?

That's correct...nobody has them....because they don't exist

..

midnighter · 02-23-2011, 07:10 PM

Place it anywhere you like.

camarocpa · 02-23-2011, 07:12 PM

Quote:

Originally Posted by MillerTime

That's correct...nobody has them....because they don't exist

..

oops! I misread! I was hoping for the bowtie alignment holes. I guess I didn't

closely enough. :(

However, Darth_Emma gave the answer I was looking for.

02-19-2011, 04:55 PM	#1
Blue Demon Drives: 2006 Corvette Join Date: Feb 2009 Location: Ft. Worth, Tx Posts: 484	2010 Rear SS Emblem Alignment Hole Measurement Question Does anyone who has removed their 2010 rear SS emblem know what the measurement between the alignment holes is? I want to remove the stock SS emblem and replace it with a LS3 emblem but I want to be sure the LS3 emblem will cover the SS alignment holes first. Thanks!

02-19-2011, 04:57 PM	#2
Milk 1027 Camaro➎ moderator Drives: '13 BLK 1LE Join Date: Aug 2008 Location: AZ Posts: 13,567 View My Garage	There are no holes behind the SS badges. __________________

02-19-2011, 05:07 PM	#4
TripleB SoCal Mayhem Drives: 2017 2LT Hyper Blue Metallic Camaro Join Date: May 2009 Location: Lakewood, California Posts: 5,918 View My Garage	My rear SS was stuck on with 3M double sided molding tape. I just put some blue painter's masking tape around the SS so I knew where to put my new ones. __________________

02-23-2011, 07:03 PM	#8
Kwik Drives: car Join Date: Feb 2010 Location: USA Posts: 801	He's asking about the SS emblems. I don't think there are holes for them, only the bowtie. __________________ Upgrades to suspension, brakes, motor and appearance. 482.7 RWHP- 434.2 RWT - All motor.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY : Install headers on 2010 Camaro SS	Nine Ball	Camaro DIY & HOW-TO instructions & discussions	70	06-25-2020 07:40 PM
C&D: 2010 Lingenfelter Camaro SS shootout with 2010 Roush Ford Mustang Stage 3	Tran	5th Gen Camaro SS LS LT General Discussions	101	03-25-2010 02:37 PM
Suspension guys out there - lets talk wheel hop	Crowley	Suspension / Brakes / Chassis	14	10-09-2009 01:06 AM
2010 SS emblem dimensions	Rick76LT	5th Gen Camaro SS LS LT General Discussions	2	07-30-2009 02:00 AM

02-19-2011, 05:02 PM	#3
Blue Demon Drives: 2006 Corvette Join Date: Feb 2009 Location: Ft. Worth, Tx Posts: 484	Okay, thanks, I was told both the rear bowtie and SS emblems had alignment holes for the 2010 model.

02-23-2011, 08:25 AM	#6
camarocpa Drives: 2010 2SS/RS Join Date: Nov 2010 Location: SE Wisconsin Posts: 173	So no one has the measurement?

02-23-2011, 06:43 PM	#7
Darth_Emma Psssssssssshhhhhhhhhhhhh! Drives: under contruction Join Date: Nov 2009 Location: Marysville, Ohio Posts: 12,996 View My Garage	The holes are 3 15/16" apart center to center. The total spacing from edge to edge is 4 1/4" behind the bowtie. I replaced by bowties and I got the measurments off the pins on the back of the bowtie from the back of my 2010 SS.

02-23-2011, 07:10 PM	#10
midnighter Account Suspended Drives: nothing Join Date: Nov 2010 Location: a hole Posts: 17,904	Place it anywhere you like.