Small original SS emblem on heritage grill. how have you mounted yours? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

nomadicdogg · 03-21-2011, 05:46 PM

First off, I know about clean cut creations. while theres is ok. Im leary of just taping their bracket on since thats all that holds it. in all honesty, why not just tape the ss emblem on and save the $30 for their bracket. Im not really keen on either way though. Anyone come up with a way to mount it with something that tightens so it wont move or dislodge? pics would be great, specifics too
help a fellow member out guys
thanks

p3jason · 03-21-2011, 08:13 PM

I wouldn't worry about it. That 3M tape is pretty serious stuff. It's held the emblem on my heritage grill for 6 months now.

nomadicdogg · 03-21-2011, 09:10 PM

Quote:

Originally Posted by p3jason

I wouldn't worry about it. That 3M tape is pretty serious stuff. It's held the emblem on my heritage grill for 6 months now.

the emblem itself or the emblem with the plastic piece from the other place?
I think the emblem is wide enough to hit 2 of the framing rails of the grille.
just not sure how it would hold up that way.....

p3jason · 03-21-2011, 09:42 PM

Quote:

Originally Posted by nomadicdogg

the emblem itself or the emblem with the plastic piece from the other place?
I think the emblem is wide enough to hit 2 of the framing rails of the grille.
just not sure how it would hold up that way.....

Mine is from CLean Cut Creations. The emblem itself comes mounted on a plastic mounting plate and that has 2 strips of 3M tape on it. It's just tall enough to stick on two two rails of the heritage grill.

stso634 · 03-21-2011, 10:13 PM

Check out Sparks Restorations. They have complete SS emblems made of billet aluminum with a steel mounting bracket made for the Heritage Grille, They are kinda pricey, but worth the $$$. It's also a larger emblem so you can install it in place of the bowtie.

nomadicdogg · 03-22-2011, 06:29 AM

Quote:

Originally Posted by stso634

Check out Sparks Restorations. They have complete SS emblems made of billet aluminum with a steel mounting bracket made for the Heritage Grille, They are kinda pricey, but worth the $$$. It's also a larger emblem so you can install it in place of the bowtie.

thanks for the info but I intend to keep my bowtie. I am talking about the small red SS emblem on the lower right hand side of the grill.
I have seen sparks SS and while not a fan of it, do think it is of good quality and craftsmanship

nomadicdogg · 03-22-2011, 06:30 AM

Quote:

Originally Posted by p3jason

Mine is from CLean Cut Creations. The emblem itself comes mounted on a plastic mounting plate and that has 2 strips of 3M tape on it. It's just tall enough to stick on two two rails of the heritage grill.

I am well aware of clean cuts plate. But for $30 with shipping, I will be seeing if the emblem is wide enough to do the same thing with and save the money.

MillerTime · 03-22-2011, 01:14 PM

I'm leavin mine Nekkid!!

nomadicdogg · 03-22-2011, 05:31 PM

Quote:

Originally Posted by MillerTime

I'm leavin mine Nekkid!!

I think they look good both with and without emblems... Its just something I would like to keep for my own tastes.
however, naked is almost always better

03-21-2011, 05:46 PM	#1
nomadicdogg Drives: '10 2SS/RS Cyber Grey Camaro (sold) Join Date: Nov 2010 Location: Western, PA Posts: 1,737 View My Garage	Small original SS emblem on heritage grill. how have you mounted yours? First off, I know about clean cut creations. while theres is ok. Im leary of just taping their bracket on since thats all that holds it. in all honesty, why not just tape the ss emblem on and save the $30 for their bracket. Im not really keen on either way though. Anyone come up with a way to mount it with something that tightens so it wont move or dislodge? pics would be great, specifics too help a fellow member out guys thanks

03-21-2011, 08:13 PM	#2
p3jason Allergic to stupid. Drives: 2015 ZL1 #957 M6 AGM & 1990 Z24 Join Date: Aug 2010 Location: Jacksonville, FL Posts: 368 View My Garage	I wouldn't worry about it. That 3M tape is pretty serious stuff. It's held the emblem on my heritage grill for 6 months now. __________________

03-22-2011, 01:14 PM	#8
MillerTime Blowin the doors off! Drives: A 2013 SS RS 6M SR Join Date: Apr 2010 Location: Phoenix, AZ Posts: 2,390	I'm leavin mine Nekkid!! __________________ 2G1FS1EWXD9163847

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Heritage Grille SS emblem, old skool	MR. FBDY	Camaro DIY & HOW-TO instructions & discussions	27	09-22-2013 10:27 AM
Bowtie Modification for the Heritage Grille with SS emblem	cerberus	Cosmetics and Lighting Modification Discussions	19	11-08-2011 08:26 AM
Do you want the Z28?	ChrisB	Camaro ZL1 Forum - ZL1 Specific Topics	1616	09-04-2010 11:49 PM
Heritage Grill Mounted	tnspd	Cosmetics and Lighting Modification Discussions	62	02-17-2010 06:33 PM

03-21-2011, 10:13 PM	#5
stso634 Drives: 2010 Camaro 2SS/RS Join Date: Feb 2011 Location: Shreveport, LA Posts: 379 View My Garage	Check out Sparks Restorations. They have complete SS emblems made of billet aluminum with a steel mounting bracket made for the Heritage Grille, They are kinda pricey, but worth the $$$. It's also a larger emblem so you can install it in place of the bowtie.