You are browsing camaro5 
 |
|
02-21-2009, 03:59 PM
|
#1 |
      
Drives: Cars Join Date: Feb 2009
Location: N/A
Posts: 1,986
|
Sun Visor
Are there any pics that show the visor? In my last car, the clip was facing you. So when you had to move the visor to the side window, you could do it in one quick motion... grab it and pull it toward you and to the side. In my current car, THE VISOR DRIVES ME INSANE! The clip is facing the WINDOW, so you have to push it away from you to detach it (which is very tight and a bitch to do), then pull it down and toward you and to the side. It's such a pain in the ass!!! Also, for some reason, the visor corner is very rounded/angled, so the sun will always peek through at just the wrong spot... just to piss me off...!!!
 Anyways... does anyone have any pics (or info?) of how the visor looks on the Camaro? I don't recall seeing any yet... Thanks! 
|
|
|
|
02-21-2009, 04:23 PM
|
#2 |
   
|
I took a picture of the visor, It does not look like the clip would be too difficult to pull the visor from. I will mention the visor is very small. I believe it is due to the fact the windshield has a narrow field of view.
http://i615.photobucket.com/albums/t...9/P1010336.jpg http://i615.photobucket.com/albums/t...9/P1010337.jpg http://i615.photobucket.com/albums/t...9/P1010333.jpg
__________________
Update...Build in process, Forged Rods, Pistons and rings, Johnson Lifters, NOVI1500 ECS SC, 13lb boost or more, LS3 Conversion 114/228/241 COMP CAM, Frostbite 4 row Aluminum radiator, 6L80 built, Circle D 6L80 PRO SERIES MULTI 258MM 2D, Stock 3.45 gears, 1-7/8 American Racing Headers w/HF cat, X-Pipe, Lingenfelter dual fuel pump, E-85 flex sensor, ATI super damper pulley, Ported TB, 160 therm, Trans cooler, Pedder's sways/end links/sub frame bushings, BMR trailing arms & toe rods, Coil overs. HP/TQ pending
 |
|
|
|
|
02-21-2009, 04:48 PM
|
#3 |
|
Drives: Cars Join Date: Feb 2009
Location: N/A
Posts: 1,986
|
Thanks... looks like I will not like it as it has quite a gap on the left :( oh well...
Does it slide? My current one does and that's the only thing I like about it, haha. If I bring it to the side, and it's still not enough, it slides "out" so that it covers more area. |
|
|
|
|
02-21-2009, 05:17 PM
|
#4 |
|
:chevy:
Drives: 2LT/RS Join Date: Jun 2008
Location: Toronto
Posts: 13,035
|
Lmao the sun visor was soooo small when i saw it in person, i thought it was hilarious. But it makes soo much sense since your looking out throught a very narrow windshield, and the feeling you get looking out the narrow windshield is unbeatable. I have never sat in a car that makes me fgeel this good, and this happy.
|
|
|
|
|
02-21-2009, 05:29 PM
|
#5 | ||
|
Sage of Thread Killing
Drives: IBM Tumbler Join Date: Jan 2009
Location: Melbourne Beach, FL
Posts: 2,362
|
Quote:
__________________
 "It's better to be thought a fool than to open your mouth and remove all doubt." Abraham Lincoln Quote:
|
||
|
|
|
|
02-22-2009, 08:44 AM
|
#6 |
|
|
I do not recall seeing a sliding shield on it. It is rather wide from side to side, but I do not recall seeing it slide open.
__________________
Update...Build in process, Forged Rods, Pistons and rings, Johnson Lifters, NOVI1500 ECS SC, 13lb boost or more, LS3 Conversion 114/228/241 COMP CAM, Frostbite 4 row Aluminum radiator, 6L80 built, Circle D 6L80 PRO SERIES MULTI 258MM 2D, Stock 3.45 gears, 1-7/8 American Racing Headers w/HF cat, X-Pipe, Lingenfelter dual fuel pump, E-85 flex sensor, ATI super damper pulley, Ported TB, 160 therm, Trans cooler, Pedder's sways/end links/sub frame bushings, BMR trailing arms & toe rods, Coil overs. HP/TQ pending
|
|
|
|
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Obama Climate Change Advisers Holdren and Lubchenco Are Told Global Warming Is Over | bigralph | Off-topic Discussions | 15 | 02-06-2009 08:07 PM |
| Sun Roof? | FlaSS | Cosmetics and Lighting Modification Discussions | 32 | 01-09-2009 02:47 AM |
