Someone please make this DIY! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ihaveacamaro · 04-15-2011, 10:58 AM

If someone more qualified than me would make this DIY, I would be so thankful!

Would someone be willing to make a DIY about how to make a switch in the cabin?

Will lots of layman terms with the wiring...

To clarify, I am trying to make a switch for my halos in the headlights. I just have no idea where to begin!

I saw the threads with running wire from under the hood to inside the cabin, but I don't know what to do to make the wires into a switch.

Thanks,
Roshan

Darth Martel · 04-15-2011, 05:48 PM

I can try and put something together Monday if nobody beats me to it by then.

Rob191288 · 04-16-2011, 08:16 PM

its really easy all you need to do is put the negative wire onto a ground, take your postive wire and its going to plug directly into the switch, then your going to have a negative on your switch as well, and your gonna have one more wire come from your switch which is going to plug directly into a 12V or battery terminal.

Rob191288 · 04-16-2011, 08:38 PM

Here is a basic layout of how it should look. There is another way you can do it where you use a relay but you shouldn't need a relay with halos.

ihaveacamaro · 04-18-2011, 01:01 PM

Quote:

Originally Posted by Darth Martel

I can try and put something together Monday if nobody beats me to it by then.

Please do!

Quote:

Originally Posted by Rob191288

Here is a basic layout of how it should look. There is another way you can do it where you use a relay but you shouldn't need a relay with halos.

Thanks! This simplifies the whole thing greatly! Btw, could you explain the power for the switch. Can I just use a fuse tap?

The Stig · 04-18-2011, 01:09 PM

Quote:

Originally Posted by ihaveacamaro

Please do!

Thanks! This simplifies the whole thing greatly! Btw, could you explain the power for the switch. Can I just use a fuse tap?

Yes, you can just tap into any of the 12v constant fuses

lscamaro · 04-25-2011, 11:59 AM

Yes i just tapped into a fuse for some footwell lighting i installed. I installed it with a toggle switch.

The Stig · 04-25-2011, 12:09 PM

Here you go

http://www.camaro5.com/forums/showthread.php?t=131838

ihaveacamaro · 04-25-2011, 05:13 PM

Quote:

Originally Posted by stieger

Here you go

http://www.camaro5.com/forums/showthread.php?t=131838

all I have to say is

The Stig · 04-25-2011, 05:31 PM

Glad I could help

04-15-2011, 10:58 AM	#1
ihaveacamaro I like teeth. Drives: #198 Join Date: Oct 2009 Location: Ft. Lauderdale, Florida Posts: 4,817	Someone please make this DIY! If someone more qualified than me would make this DIY, I would be so thankful! Would someone be willing to make a DIY about how to make a switch in the cabin? Will lots of layman terms with the wiring... To clarify, I am trying to make a switch for my halos in the headlights. I just have no idea where to begin! I saw the threads with running wire from under the hood to inside the cabin, but I don't know what to do to make the wires into a switch. Thanks, Roshan

04-25-2011, 12:09 PM	#8
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	Here you go http://www.camaro5.com/forums/showthread.php?t=131838 __________________

04-25-2011, 05:31 PM	#10
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	Glad I could help __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY - Adding YOUR car to YOUR Tom Tom	Sir Nuke	Camaro DIY & HOW-TO instructions & discussions	132	11-21-2025 11:14 AM
What song are you listening to right now	Muscle Master	Off-topic Discussions	6760	11-08-2025 02:54 AM
5th Gen Suspension -- The Book	JusticePete	Suspension / Brakes / Chassis	151	05-07-2015 06:52 PM
DIY : Install underdrive pulley on 2010 Camaro SS	Nine Ball	Camaro DIY & HOW-TO instructions & discussions	34	09-30-2013 09:25 PM
DIY : Install catback on 2010 Camaro SS	Nine Ball	Camaro DIY & HOW-TO instructions & discussions	3	08-09-2009 05:36 PM

04-15-2011, 05:48 PM	#2
Darth Martel Darth Martel Drives: Black 1SS with 20% tinted windows Join Date: May 2009 Location: Bizzaroland Posts: 1,495	I can try and put something together Monday if nobody beats me to it by then.

04-16-2011, 08:16 PM	#3
Rob191288 Drives: 2010 Camaro LS Join Date: Jun 2010 Location: Andrews AFB, MD Posts: 586 View My Garage	its really easy all you need to do is put the negative wire onto a ground, take your postive wire and its going to plug directly into the switch, then your going to have a negative on your switch as well, and your gonna have one more wire come from your switch which is going to plug directly into a 12V or battery terminal.

04-16-2011, 08:38 PM	#4
Rob191288 Drives: 2010 Camaro LS Join Date: Jun 2010 Location: Andrews AFB, MD Posts: 586 View My Garage	Here is a basic layout of how it should look. There is another way you can do it where you use a relay but you shouldn't need a relay with halos.

04-25-2011, 11:59 AM	#7
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	Yes i just tapped into a fuse for some footwell lighting i installed. I installed it with a toggle switch.