No2 racer guys, I want some info - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Bad70supreme · 04-27-2011, 03:58 PM

I have never ran nitrous before, I plan on a full bolt-on h/c setup over the next few years. As far as nitrous... how many of you guys are running it, what setups are you running, what does the full cost for the No2 setup go for and what times are your running? Basicly any No2 guys I want to know your setups!

Also if I did all bolt-ons with a 150 shot and tires what kinda times could I expect.

Graham@N · 04-27-2011, 04:20 PM

We have a TON on 5th gens and LSX owners running our system.

I usually recommend our Plate systems. They are application specific with custom made stainless hardlines, specific solenoid mounts, wire extensions harness included. The works.

http://www.nitrousoutlet.com/install...stall.asp?id=9

Here is an install we did.

The cost of putting a package together will really vary on what all you would like out of your system. I am happy to go over some of the additional features to add to the 2010 specific system.

We will work with you to make sure you have a good idea of what your looking at and how to use it. Down to the correct spark plugs.

04-27-2011, 03:58 PM	#1
Bad70supreme Drives: 2010 aqua blue SS/RS M6 Join Date: Feb 2010 Location: plainfield, IL Posts: 2,706	No2 racer guys, I want some info I have never ran nitrous before, I plan on a full bolt-on h/c setup over the next few years. As far as nitrous... how many of you guys are running it, what setups are you running, what does the full cost for the No2 setup go for and what times are your running? Basicly any No2 guys I want to know your setups! Also if I did all bolt-ons with a 150 shot and tires what kinda times could I expect. __________________ 10.91 at 122 H/C stock block N/A

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ABL connector info	Toasty	Camaro DIY & HOW-TO instructions & discussions	11	12-22-2013 11:34 AM
Chemical Guys Rant	2LTRS	Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection	15	04-30-2010 09:41 AM
Headlight mounting info	wylde1	Cosmetics and Lighting Modification Discussions	0	04-06-2010 02:40 PM
Road Trip and a Question For You Guys	Seawolf	5th Gen Camaro SS LS LT General Discussions	52	01-05-2010 11:56 PM
What Do You Guys Think? Different look for different models?	CoolestCamaro873	5th Gen Camaro SS LS LT General Discussions	8	03-30-2008 02:46 PM

04-27-2011, 04:20 PM	#2
Graham@N Drives: Pontiac Firebird Join Date: Apr 2011 Location: Waco, TX Posts: 154	We have a TON on 5th gens and LSX owners running our system. I usually recommend our Plate systems. They are application specific with custom made stainless hardlines, specific solenoid mounts, wire extensions harness included. The works. http://www.nitrousoutlet.com/install...stall.asp?id=9 Here is an install we did. The cost of putting a package together will really vary on what all you would like out of your system. I am happy to go over some of the additional features to add to the 2010 specific system. We will work with you to make sure you have a good idea of what your looking at and how to use it. Down to the correct spark plugs.