![]() |
|
|
#1 |
![]() Drives: 2010 SS M6 2016 2SS A8 Join Date: Oct 2009
Location: Utah
Posts: 553
|
Stock Maggie injectors how much RWHP can they support?
How much rwhp are you guys making before you have had to upgrade the Maggie injectors?
__________________
TVS 2300 721RWHP 686RWTQ
Built by Me Suspension done by JDP Tune done by JRE |
|
|
|
|
|
#2 |
![]() Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,418
|
Your There, May I suggest Injector Dynamics ID-850s
__________________
www.jannettyracing.com
Celebrating 39 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
|
|
|
|
#3 |
![]() Drives: 2010 SS M6 2016 2SS A8 Join Date: Oct 2009
Location: Utah
Posts: 553
|
Somebody else recommended me those today
__________________
TVS 2300 721RWHP 686RWTQ
Built by Me Suspension done by JDP Tune done by JRE |
|
|
|
|
|
#4 |
![]() ![]() ![]() ![]() Drives: 08' F250 Diesel & 10' Camaro 2SS Join Date: Nov 2010
Location: Gainesville,Fl
Posts: 1,362
|
I am at 600 and we are maxed on the injectors.
__________________
08' F250 CCSB 6.4L Diesel White & Black, Blacked out, 580RWHP @ 55psi 13.21 @ 101mph
10' Camaro 2SS LS3 M6 White & Black, Blacked out, 684 RWHP & 633 FT.LBS @ 10psi 10.82@130mph TVS2300 ,Hendrix Street Slayer Twin Carbon Clutch, Dana 60 3.73, DSS 1400HP Axles,JRe cam & LaMotta Performance tuned,LPE Fuel, AI Super Chiller,MT ET Streets |
|
|
|
|
|
#5 |
![]() Drives: 2010 SS M6 2016 2SS A8 Join Date: Oct 2009
Location: Utah
Posts: 553
|
Thank You! that is what I was trying to find out
__________________
TVS 2300 721RWHP 686RWTQ
Built by Me Suspension done by JDP Tune done by JRE |
|
|
|
|
|
#6 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2010 2SS, 2017 Silverado LTZ Join Date: Jan 2007
Location: Denver,PA
Posts: 3,195
|
What size are the Maggie injecters?
|
|
|
|
|
|
#7 |
|
Account Suspended
Drives: Anything Blown Join Date: Aug 2010
Location: SoCal
Posts: 1,194
|
52lb/hr 4BAR (58psi)
They are LS9 ZR1 injectors. |
|
|
|
|
|
#8 |
|
Drives: 2x 05 Vettes/65'AC cobra/68 camaro Join Date: Apr 2009
Location: LONGVIEW, TEXAS
Posts: 845
|
you are maxed out if you have really any supporting mods
IE HEADERS CAI EXHAUST we run the fast 85s on all our builds they are simple to tune, great price, and will support alot of HP down the road! |
|
|
|
|
|
#9 | |
![]() Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,418
|
Quote:
No Comparison and they have more range, we easily found the limits of Fast 85s. Ted.
__________________
www.jannettyracing.com
Celebrating 39 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
|
|
|
|
|
#10 |
![]() ![]() ![]() ![]() Drives: 08' F250 Diesel & 10' Camaro 2SS Join Date: Nov 2010
Location: Gainesville,Fl
Posts: 1,362
|
I am sad now to know they are this small, I wish they were 60-65lb. Your not even at the limit of the blower with 52lb. stix. Why so small? I am happy with my TVS system but to find out I did a cam and to know I now have to buy injectors makes me wonder if I should have went with the Whipple for $1k more and wold have been set.
__________________
08' F250 CCSB 6.4L Diesel White & Black, Blacked out, 580RWHP @ 55psi 13.21 @ 101mph
10' Camaro 2SS LS3 M6 White & Black, Blacked out, 684 RWHP & 633 FT.LBS @ 10psi 10.82@130mph TVS2300 ,Hendrix Street Slayer Twin Carbon Clutch, Dana 60 3.73, DSS 1400HP Axles,JRe cam & LaMotta Performance tuned,LPE Fuel, AI Super Chiller,MT ET Streets |
|
|
|
|
|
#11 |
|
Account Suspended
Drives: 2006 Z06 Join Date: Oct 2010
Location: St. Louis, MO
Posts: 145
|
Injector Dynamics are literally the best injector on the market that you can put in your car. They flow a ton of fuel, but they come with the data to make them perform flawlessly in any operating condition. Nothing compares, and chances are... anybody who says Brand X injector works just as well has never used Injector Dynamics. For reasons unknown to me (and even Paul Yaw), engines just seem to idle and run smoother with IDs as well... better than with stock injectors. That's probably due to the fact that ID not only matches injectors based on raw flow, but also on response time, so you get 8 injectors that are TRULY matched (matching by flow rate measured by pissing the injectors into a graduated cylinder is NOT as cracked up as it sounds).
Just be ready to pay a lot of money for them. The one complaint I get from everybody is how much they cost. After people realize how easy they are to work with though, they typically agree the price is justified. If you pay more than $880 for ID850s from anybody, you're getting cheated. If you pay less, that dealer is risking losing their dealer status. Everybody ships them free (or at least should). |
|
|
|
|
|
#12 | |
![]() Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,418
|
Quote:
![]() So I only sell tuner kits from Whipple with the ID-850s
__________________
www.jannettyracing.com
Celebrating 39 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
|
|
|
|
|
|
|
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Supercharger / Turbocharger Results (INFO) Thread | radz28 | Forced Induction - V8 | 273 | 08-15-2023 05:44 PM |
| 2SS Average Stock RWHP? | LK | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 34 | 09-05-2010 09:26 PM |
| what size fuel injectors recommended with maggie? | Jay_ray23 | Forced Induction - V8 | 3 | 08-27-2010 05:21 PM |
| My photo album of Maggie photos. | Nine Ball | Forced Induction - V8 | 19 | 08-26-2010 03:09 PM |