ACS Camaro T2 Front Bumper Ports (For Camaro LS LT Only, V6) - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

PoorMansCamaro · 07-04-2011, 02:05 PM

I just copied the title from the sponsor section, I hope that was ok. Figured I'd get more looks here.

Anyway, I was wondering if there were any more that purchased these ports and has pics?

I also am wondering if these would work with the long tube injen cold air intake?

camaro2lt · 07-04-2011, 02:51 PM

I have t2 checkout my build thread for pics

Overflow · 07-04-2011, 03:48 PM

I've seen many people on here with the ports. Montreal was one of them.

montreal2010yellow · 07-04-2011, 04:37 PM

I have T2 installed with newest splitter from ACS.

The ports are functionnal so better air circulation inside the engine bay. Does it work with your CAI, just send a email to Joe at www.acscomposite.com he's the owner. But as far as I can imagine, I think it would give more air to your CAI.

Name: t2 with leds on.jpg
Views: 2478
Size: 147.9 KB

Name: t2 with leds on.jpg
Views: 2478
Size: 147.9 KB

Name: oshawa martinrea plant2.jpg
Views: 2185
Size: 84.4 KB

Overflow · 07-04-2011, 05:05 PM

Quote:

Originally Posted by montreal2010yellow

I have T2 installed with newest splitter from ACS.

The ports are functionnal so better air circulation inside the engine bay. Does it work with your CAI, just send a email to Joe at www.acscomposite.com he's the owner. But as far as I can imagine, I think it would give more air to your CAI.

Attachment 260931

Attachment 260932

There he is.

AUS10BMX · 07-04-2011, 07:38 PM

Not to thread jack, but I was looking at some of ACS stuff this morning, and I really like that front splitter. I've only seen far off pics of it, just trying to get a more detailed up close look at it in the front, and how well it shapes up on the bumper at the edges.

RickRay · 07-04-2011, 08:00 PM

Quote:

Originally Posted by AUS10BMX

Not to thread jack, but I was looking at some of ACS stuff this morning, and I really like that front splitter. I've only seen far off pics of it, just trying to get a more detailed up close look at it in the front, and how well it shapes up on the bumper at the edges.

Your wish is my command:

Tx1Lt · 07-05-2011, 12:43 AM

Wow that ti-grey looks awesome. Is that the t2 splitter as well?

montreal2010yellow · 07-05-2011, 05:27 AM

Quote:

Originally Posted by Tx1Lt

Wow that ti-grey looks awesome. Is that the t2 splitter as well?

T2's with Carbon Fiber finish for the ports and T2 new splitter from ACS.

PoorMansCamaro · 07-05-2011, 08:00 AM

Quote:

Originally Posted by montreal2010yellow

I have T2 installed with newest splitter from ACS.

The ports are functionnal so better air circulation inside the engine bay. Does it work with your CAI, just send a email to Joe at www.acscomposite.com he's the owner. But as far as I can imagine, I think it would give more air to your CAI.

ok, i'll give him a shout, thanks. The reason i'm asking is that it looks like the port would hit the air filter, since it sits right there. The port might be too deep.

ACS Composite · 07-05-2011, 08:32 AM

Thanks for the interest, let us know if you have any questions on our T2 Set up.

You can find more info in our store under bumper accessories.

http://www.acscomposite.com/store/st...=0&sort=normal

camaro2lt · 07-05-2011, 10:18 AM

here is mine t3s on the left t2s on the right

acamaro · 07-06-2011, 09:05 AM

Is there any chance anyone will make a cool little new fog light set up to go in the hole? It looks great however the foglight looks like its out of place floating there. It doesn't look bad at all it just looks like there could be a major improvement

Sorry for the threadjack didn't realize it..I'm going to make a new thread

Demon Hunter · 07-06-2011, 10:27 AM

I'm curious as to weather the T2 ports will work with the injen intake also. I really like them but I'm afraid they wont work with it.

07-04-2011, 02:05 PM	#1
PoorMansCamaro Drives: Really Slow Join Date: Apr 2010 Location: PA Posts: 57,250	ACS Camaro T2 Front Bumper Ports (For Camaro LS LT Only, V6) I just copied the title from the sponsor section, I hope that was ok. Figured I'd get more looks here. Anyway, I was wondering if there were any more that purchased these ports and has pics? I also am wondering if these would work with the long tube injen cold air intake? __________________

07-04-2011, 02:51 PM	#2
camaro2lt Drives: 2010 Camaro 2LT VR/RS CGM Rally's Join Date: May 2009 Location: Palmyra, PA Posts: 5,675 View My Garage	I have t2 checkout my build thread for pics __________________ Email: rdurso1@yahoo.com

07-04-2011, 04:37 PM	#4
montreal2010yellow Drives: 2 LT/RS YELLOW, AUTO., VIN NO. 602 Join Date: May 2010 Location: LAVAL (10 min. north of Montreal), CANADA Posts: 3,526 View My Garage	Here's mine I have T2 installed with newest splitter from ACS. The ports are functionnal so better air circulation inside the engine bay. Does it work with your CAI, just send a email to Joe at www.acscomposite.com he's the owner. But as far as I can imagine, I think it would give more air to your CAI. __________________ T2 Facia, ACS TL1 Hood, ACS Winglets. G5CR CAI. Hotchsic Strut Brace and more...

07-05-2011, 12:43 AM	#8
Tx1Lt Mark it ZERO! Drives: '10 Black Camaro Join Date: Feb 2010 Location: Laredo, Tx Posts: 1,506 View My Garage	Wow that ti-grey looks awesome. Is that the t2 splitter as well? __________________

07-05-2011, 10:18 AM	#12
camaro2lt Drives: 2010 Camaro 2LT VR/RS CGM Rally's Join Date: May 2009 Location: Palmyra, PA Posts: 5,675 View My Garage	here is mine t3s on the left t2s on the right Attached Images __________________ Email: rdurso1@yahoo.com

07-04-2011, 03:48 PM	#3
Overflow Space Shuttle Aficionado Drives: 2016 Camaro 2SS Join Date: Jun 2010 Location: Tampa, FL Posts: 30,897 View My Garage	I've seen many people on here with the ports. Montreal was one of them.

07-04-2011, 07:38 PM	#6
AUS10BMX Drives: 2010 Join Date: Nov 2009 Location: G Posts: 1,257 View My Garage	Not to thread jack, but I was looking at some of ACS stuff this morning, and I really like that front splitter. I've only seen far off pics of it, just trying to get a more detailed up close look at it in the front, and how well it shapes up on the bumper at the edges.

07-05-2011, 08:32 AM	#11
ACS Composite Drives: 2010 Camaro Join Date: Dec 2009 Location: Montreal, Canada Posts: 1,249	Thanks for the interest, let us know if you have any questions on our T2 Set up. You can find more info in our store under bumper accessories. http://www.acscomposite.com/store/st...=0&sort=normal

07-06-2011, 09:05 AM	#13
acamaro Drives: Bumblebee Join Date: Jan 2010 Location: here Posts: 93	Is there any chance anyone will make a cool little new fog light set up to go in the hole? It looks great however the foglight looks like its out of place floating there. It doesn't look bad at all it just looks like there could be a major improvement Sorry for the threadjack didn't realize it..I'm going to make a new thread

07-06-2011, 10:27 AM	#14
Demon Hunter Drives: 2010 Black Camaro LT Join Date: Oct 2009 Location: So Cal Posts: 675 View My Garage	I'm curious as to weather the T2 ports will work with the injen intake also. I really like them but I'm afraid they wont work with it. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Transcript of Camaro ZL1 Q&A Webchat with Chevrolet	Tran	Camaro ZL1 Forum - ZL1 Specific Topics	42	12-22-2017 04:42 AM
Camaro Product Manager - interview	Moose	5th Gen Camaro SS LS LT General Discussions	11	04-04-2012 06:10 PM
Modern Camaro Performance Parts - www.PartsTaxi.com	PartsTaxi.com	Sponsor Announcements / Giveaways / Contests	0	10-06-2010 04:26 PM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM