Re-setting Tire Pressure Monitoring System - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ravensjeff · 07-05-2011, 04:16 PM

Just had new tires, and rims with new sensors put on the car. The shop did the re-programming for each sensor- I watched them. All sensors react correctly.

What I'm not sure of, is why the "Press Set/Clr to Relearn" message is still being displayed? I didn't think it was there before.

I didn't want to press set/clr and have the system want to re-program all the sensors again. Or does that have to be done to complete the process? The owners manual didn't help with this.

sstphoenix · 07-05-2011, 04:46 PM

dont worry. it is always there
when i first got the car i did the mistake of doing it.
i had to use the manual after to set them again myself.

Chevrolet Customer Svc · 07-07-2011, 02:48 PM

In order to back up what sstphoenix is saying I would like to direct this to my technical team and see if we can get you an answer to this question. Hopefully I'll have something back for you soon.

Jeff Morris, Chevroelt Customer Service

jrpimp00 · 07-07-2011, 04:03 PM

Or you can just turn the DIC to a different page/view. Its just displaying the last page viewed which is the tire pressure page cause they used it to relearn the sensors.

Chevrolet Customer Svc · 07-08-2011, 10:48 AM

I've gotten a reply back and it is as jrpimp00 says. You should be able to scroll to another screen come back to your TPMS screen and the message should be gone for you. I hope that helps you.

Jeff Morris, Chevrolet Customer Service

ravensjeff · 07-08-2011, 11:29 AM

Thanks for the help. That is what I did before reading this and the message did magically go away!!

I tell you, any answers needed can always be received from this forum.

woodstock · 07-08-2011, 11:35 AM

It's a temp message.

ravensjeff · 07-08-2011, 02:09 PM

Quote:

Originally Posted by woodstock

It's a temp message.

Must have been. I was wondering what was going on since the system was re-programmed on a Saturday and the message was still there days later.

07-05-2011, 04:16 PM	#1
ravensjeff 100% Chevy & Harley Man Drives: 2010 2SS: Blown LSX 376-B15 Join Date: Feb 2009 Location: Eldersburg,MD Posts: 2,211 View My Garage	Re-setting Tire Pressure Monitoring System Just had new tires, and rims with new sensors put on the car. The shop did the re-programming for each sensor- I watched them. All sensors react correctly. What I'm not sure of, is why the "Press Set/Clr to Relearn" message is still being displayed? I didn't think it was there before. I didn't want to press set/clr and have the system want to re-program all the sensors again. Or does that have to be done to complete the process? The owners manual didn't help with this. Attached Images __________________ LSX 376-B15, TVS2300 SC, Harland Sharp Rockers w/ Trunion Bearings, ATI Balancer/keyed, AR LT Headers/Borla Catback Exhaust, DSS 1400 HP Axles, DSS aluminum driveshaft, 3.70, Hotchkis Springs/Sway bars, Forgeline SO3P Aluminum Wheels (20x9.5 F/20x11 R)w/ Hidden Titanium Hardware, Nitto NT05 Tires (27540ZR20 F/31535ZR20 R), Billet LPE brake/gas pedals, Escort 9500ci Radar Detector Laser Jammer, Roto Fab CAI with Ice Silver box, Carbon fiber tube/MAF Housing Assy, LPE Aluminum coil covers, SS9 Sleeper Fiber Glass Hood (ACS), Carbotech 1521 ceramic brake pads, Elite catch can.

07-07-2011, 04:03 PM	#4
jrpimp00 Drives: '10 Black/IOM Camaro SS/RS Join Date: Mar 2010 Location: Fayetteville NC Posts: 530	Or you can just turn the DIC to a different page/view. Its just displaying the last page viewed which is the tire pressure page cause they used it to relearn the sensors. __________________ 2010 Camaro 2SS/RS Black/IOM //// 1998 Pontiac Trans AM 819 RWHP @ 12 PSI (Turbo)

07-08-2011, 11:29 AM	#6
ravensjeff 100% Chevy & Harley Man Drives: 2010 2SS: Blown LSX 376-B15 Join Date: Feb 2009 Location: Eldersburg,MD Posts: 2,211 View My Garage	Thanks for the help. That is what I did before reading this and the message did magically go away!! I tell you, any answers needed can always be received from this forum. __________________ LSX 376-B15, TVS2300 SC, Harland Sharp Rockers w/ Trunion Bearings, ATI Balancer/keyed, AR LT Headers/Borla Catback Exhaust, DSS 1400 HP Axles, DSS aluminum driveshaft, 3.70, Hotchkis Springs/Sway bars, Forgeline SO3P Aluminum Wheels (20x9.5 F/20x11 R)w/ Hidden Titanium Hardware, Nitto NT05 Tires (27540ZR20 F/31535ZR20 R), Billet LPE brake/gas pedals, Escort 9500ci Radar Detector Laser Jammer, Roto Fab CAI with Ice Silver box, Carbon fiber tube/MAF Housing Assy, LPE Aluminum coil covers, SS9 Sleeper Fiber Glass Hood (ACS), Carbotech 1521 ceramic brake pads, Elite catch can.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Colorado members check in here	2010 SS RS	USA - Rockies / Midwest	8853	06-13-2022 07:45 PM
Tire Pressure Monitoring Trouble	recontango	Wheels and Tires Talk Sponsored by The Tire Rack	16	12-04-2011 08:15 AM
coming soon all new CMGS System X Meth Injection with "Auto Learn"	coolingmist	Forced Induction - V8	5	04-06-2011 11:04 AM
Great Read and Info on Oil Weight	Banshee	Mechanical Maintenance: Break-in / Oil & Fluids / Servicing	1	11-23-2009 09:03 PM
Tire Pressure Monitoring System	Noah	Wheels and Tires Talk Sponsored by The Tire Rack	24	10-13-2009 06:06 PM

07-05-2011, 04:46 PM	#2
sstphoenix Drives: Black 2LT RS 5th gen Join Date: Dec 2008 Location: montreal Posts: 362	dont worry. it is always there when i first got the car i did the mistake of doing it. i had to use the manual after to set them again myself.

07-07-2011, 02:48 PM	#3
Chevrolet Customer Svc Drives: GM Vehicles Join Date: Jun 2010 Location: Michigan Posts: 9,328	In order to back up what sstphoenix is saying I would like to direct this to my technical team and see if we can get you an answer to this question. Hopefully I'll have something back for you soon. Jeff Morris, Chevroelt Customer Service

07-08-2011, 10:48 AM	#5
Chevrolet Customer Svc Drives: GM Vehicles Join Date: Jun 2010 Location: Michigan Posts: 9,328	I've gotten a reply back and it is as jrpimp00 says. You should be able to scroll to another screen come back to your TPMS screen and the message should be gone for you. I hope that helps you. Jeff Morris, Chevrolet Customer Service

07-08-2011, 11:35 AM	#7
woodstock Drives: 2012 Corvette Grand Sport Join Date: Jan 2011 Location: martinez Ga. Posts: 503	It's a temp message.