Transformer 3 - New Front Bumper - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

NNICE · 07-18-2011, 01:38 PM

Hello all,
I am interested in buying the new front bumper that is in Transformers 3 for my 2010 Yellow Bumblebee. Any suggestions on where to buy or other suggestion for the front bumper?

The Stig · 07-18-2011, 01:43 PM

Currently, there is no aftermarket company that produces the exact bumper. However, ACS sells T3 bumper ports that are similar to the ones in the movie. There is also a member named 2SSRS whom is building a custom front bumper, though it is far from done. Outside of those options you're kind of stuck.

caper · 07-18-2011, 02:09 PM

ACS is a TOP NOTCH company as well!!!

NNICE · 07-18-2011, 02:34 PM

Thanks! I was looking at the T3 - do you know if the stock ground effects fit on those? I bumped into something so I need to replace the bumper. :-(

The Stig · 07-18-2011, 02:42 PM

Yes, the GM GFX will fit the ACS bumper.

montreal2010yellow · 07-18-2011, 03:45 PM

Here as link to ACS site. The ports are ad-ons on a SS bàfacia, so ground effects will fit for sure.

But take a look at the new splitter they now have.

http://www.camaro5.com/forums/showthread.php?t=153768

NNICE · 07-19-2011, 02:06 PM

i definitely like that. I sent an email off to request some additional info. Think it would match up with the old ground effects I have? Hope so since I want to get both. :-)

NNICE · 07-19-2011, 02:59 PM

I'm not sure if I would have to buy different running lights. I'm checking into it though.

The Stig · 07-19-2011, 03:05 PM

You do. They sell LEDs that you can hook up to the ports

Man1acs · 07-19-2011, 03:28 PM

Here is my car with ACS T3 Bumber and splitter. I love it!

NNICE · 07-19-2011, 03:42 PM

i found all the info. let me know if anyone else has gotten this for their Camaro. T3 fascia is a replacement front end with the SS style intake slot. AGRESSIVE cooling ports are installed with available one LED running daylights, T3 Splitter with a optional cooling channels INCREASING the engine’s cooling capacity by delivering cold air.

The ACS fascia is a modified Genuine GM part. Each part is robotically trimmed and assembled in a dedicated fixture. Particular design characteristics are incorporated in the assembly to insure compatibility between the various materials.

NNICE · 07-19-2011, 03:43 PM

Awesome!!! I love it. Did you get the lights? Which splitter did you get with cooling or without. Do you have ground effects on the rest of your car? Did you just have to have the splitter painted?

NNICE · 07-19-2011, 03:48 PM

looks like you have the lights - very sweet!!! I'm hoping I can get the same and soon!

klatterblast · 07-19-2011, 05:15 PM

http://www.phastekperformance.com/20...r-33-4-037.htm

07-18-2011, 01:38 PM	#1
NNICE Drives: 2SS Bumblebee Join Date: Aug 2009 Location: Bloomington, IL Posts: 9	Transformer 3 - New Front Bumper Hello all, I am interested in buying the new front bumper that is in Transformers 3 for my 2010 Yellow Bumblebee. Any suggestions on where to buy or other suggestion for the front bumper?

07-18-2011, 01:43 PM	#2
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	Currently, there is no aftermarket company that produces the exact bumper. However, ACS sells T3 bumper ports that are similar to the ones in the movie. There is also a member named 2SSRS whom is building a custom front bumper, though it is far from done. Outside of those options you're kind of stuck. __________________

07-18-2011, 02:42 PM	#5
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	Yes, the GM GFX will fit the ACS bumper. __________________

07-18-2011, 03:45 PM	#6
montreal2010yellow Drives: 2 LT/RS YELLOW, AUTO., VIN NO. 602 Join Date: May 2010 Location: LAVAL (10 min. north of Montreal), CANADA Posts: 3,526 View My Garage	ACS Site Here as link to ACS site. The ports are ad-ons on a SS bàfacia, so ground effects will fit for sure. But take a look at the new splitter they now have. http://www.camaro5.com/forums/showthread.php?t=153768 __________________ T2 Facia, ACS TL1 Hood, ACS Winglets. G5CR CAI. Hotchsic Strut Brace and more...

07-19-2011, 03:05 PM	#9
The Stig knows 2 facts about ducks Drives: ...and they're both wrong Join Date: Aug 2009 Location: The HMS Invincible Posts: 25,072 View My Garage	You do. They sell LEDs that you can hook up to the ports __________________

07-18-2011, 02:09 PM	#3
caper Drives: 2010 IOM 2ss/RS Join Date: Sep 2009 Location: SoCal, I.E. Posts: 1,546	ACS is a TOP NOTCH company as well!!!

07-18-2011, 02:34 PM	#4
NNICE Drives: 2SS Bumblebee Join Date: Aug 2009 Location: Bloomington, IL Posts: 9	Thanks! I was looking at the T3 - do you know if the stock ground effects fit on those? I bumped into something so I need to replace the bumper. :-(

07-19-2011, 02:06 PM	#7
NNICE Drives: 2SS Bumblebee Join Date: Aug 2009 Location: Bloomington, IL Posts: 9	i definitely like that. I sent an email off to request some additional info. Think it would match up with the old ground effects I have? Hope so since I want to get both. :-)

07-19-2011, 02:59 PM	#8
NNICE Drives: 2SS Bumblebee Join Date: Aug 2009 Location: Bloomington, IL Posts: 9	I'm not sure if I would have to buy different running lights. I'm checking into it though.

07-19-2011, 03:28 PM	#10
Man1acs Drives: 2010 IOM Camaro SS Join Date: May 2011 Location: NJ Posts: 214	Here is my car with ACS T3 Bumber and splitter. I love it!

07-19-2011, 03:42 PM	#11
NNICE Drives: 2SS Bumblebee Join Date: Aug 2009 Location: Bloomington, IL Posts: 9	i found all the info. let me know if anyone else has gotten this for their Camaro. T3 fascia is a replacement front end with the SS style intake slot. AGRESSIVE cooling ports are installed with available one LED running daylights, T3 Splitter with a optional cooling channels INCREASING the engine’s cooling capacity by delivering cold air. The ACS fascia is a modified Genuine GM part. Each part is robotically trimmed and assembled in a dedicated fixture. Particular design characteristics are incorporated in the assembly to insure compatibility between the various materials.

07-19-2011, 03:43 PM	#12
NNICE Drives: 2SS Bumblebee Join Date: Aug 2009 Location: Bloomington, IL Posts: 9	Awesome!!! I love it. Did you get the lights? Which splitter did you get with cooling or without. Do you have ground effects on the rest of your car? Did you just have to have the splitter painted?

07-19-2011, 03:48 PM	#13
NNICE Drives: 2SS Bumblebee Join Date: Aug 2009 Location: Bloomington, IL Posts: 9	looks like you have the lights - very sweet!!! I'm hoping I can get the same and soon!

07-19-2011, 05:15 PM	#14
klatterblast Drives: 2010 camaro 2ssrs blk. Join Date: Oct 2009 Location: walker la. Posts: 1,732 View My Garage	http://www.phastekperformance.com/20...r-33-4-037.htm __________________ 2010 Hennessey HPE650 2SSRS Blk/Blk Magnuson TVS2300,ported heads,cam,Hotchkis suspension. Weld 17”s, Mickey Thompson’s.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Shipping Weight/dimensions of front bumper cover?	danrc28	5th Gen Camaro SS LS LT General Discussions	21	08-12-2013 08:21 PM
Front Bumper Damage	dinonid	5th Gen Camaro SS LS LT General Discussions	4	01-05-2011 09:40 AM
WTT or WTB OEM 2LT Complete Bumper for SS Front Bumper (complete)	meb885	Exterior Parts & Accessories	0	12-16-2010 03:50 AM
For sale: Front Bumper (cracks by passenger headlight)	Tonka	Exterior Parts & Accessories	0	06-02-2010 06:19 PM