RS or SS Offset Badging for Heritage Grill? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

irocnroll · 08-10-2011, 11:07 AM

Does anyone make the RS or SS badging to fit on the Heritage Grill? I am not talking about where the Bowtie is supposed to go. I am talking about the smaller badge that is usually ofset to the side of the grill.

This is the only thing I am disapoint with about the Heritage grill is that it doesnt have the RS or SS badge on it or a way to mount the old one. Does anyone either make a way to mount the old badges or sell a completely new badge to fit on this grill?

sscamaro · 08-10-2011, 11:43 AM

Clean Cut Creations has them like mine.

robg91z · 09-07-2011, 07:35 PM

Bump who else sells these emblems to fit the heritage grill but the emblem seperate cuz i already purchased the heritage grill?

pnyklr · 09-08-2011, 12:01 AM

I second the motion.

Anyone?

-Funk

Disco69 · 09-08-2011, 04:03 AM

I'm interested in this as well, but moreso for the classic white "SS".

irocnroll · 11-16-2011, 04:40 PM

Haven't seen anyone really post a solution to getting the offset RS logo on the grill. Does anyone make an easy clip on solution for this?

Camaro68 · 11-16-2011, 10:52 PM

http://sparksrestorations.com/

irocnroll · 11-21-2011, 04:38 PM

Quote:

Originally Posted by Camaro68

http://sparksrestorations.com/

Those are for the Center of the grill. I am looking for the small ones that would be offset in the same location as the normal grill. Something that would just clip into place.

p3jason · 11-21-2011, 07:02 PM

Quote:

Originally Posted by irocnroll

Those are for the Center of the grill. I am looking for the small ones that would be offset in the same location as the normal grill. Something that would just clip into place.

See post #2.

Cyber/Orange10 · 11-21-2011, 11:36 PM

I just used the original.....

pnyklr · 11-21-2011, 11:47 PM

Mine is the same as Cyber.

I just used the original SS emblem, trimmed it down and installed it.

Not sure how Cyber has his attached but mine is held in with a piece of clay bar and has not moved in 2000 miles.

At some point I will find a more permanent way to mount it. But for now it works just fine.

-Funk

sscamaro · 11-22-2011, 04:15 PM

Clean Cut Creations makes one for the Heritage Grille. Pressure sensitive tape on the back.

VR Baron · 11-23-2011, 03:23 PM

I just trimmed the two long mount tabs on the stock emblem to fit in betwen the louvres, now looks like a watch band. They then tie together in back using a screw to connect to the grill to hold in place. All I could think off at the time.

08-10-2011, 11:07 AM	#1
irocnroll Drives: '91 RS Vert, '11 Grand Cherokee Join Date: May 2009 Location: Connecticut Posts: 2,343 View My Garage	RS or SS Offset Badging for Heritage Grill? Does anyone make the RS or SS badging to fit on the Heritage Grill? I am not talking about where the Bowtie is supposed to go. I am talking about the smaller badge that is usually ofset to the side of the grill. This is the only thing I am disapoint with about the Heritage grill is that it doesnt have the RS or SS badge on it or a way to mount the old one. Does anyone either make a way to mount the old badges or sell a completely new badge to fit on this grill?

09-07-2011, 07:35 PM	#3
robg91z Drives: 1991 z28 & 2011 2LT Join Date: Dec 2010 Location: Laredo, TX Posts: 186	Bump who else sells these emblems to fit the heritage grill but the emblem seperate cuz i already purchased the heritage grill? __________________

09-08-2011, 12:01 AM	#4
pnyklr Drives: A Gift From My Wife Join Date: Apr 2009 Location: Powder Springs, GA Posts: 1,557	I second the motion. Anyone? -Funk __________________ 2012 Convert 2SS/RS SW/IO LS3 - Build #1081 07/21/2011 - (3800) Order produced and vehicle is being prepared for shipping. 08/09/2011 - (4200) Shipped (vehicle is shipped to the dealer or interim point of delivery). 08/16/2011 - (5000) Vehicle has been delivered to dealer. 08/19/2011 - In my possession.

09-08-2011, 04:03 AM	#5
Disco69 The Backbone! Drives: '11 VR 2SS/RS M6, 01 Jeep TJ modded Join Date: Jun 2011 Location: Fairbanks, Alaska Posts: 358 View My Garage	I'm interested in this as well, but moreso for the classic white "SS". __________________ 2011 Victory Red 2SS/RS 2001 Jeep TJ Wrangler Sahara

11-16-2011, 10:52 PM	#7
Camaro68 Drives: 68 Camaro 327ci 2SS/RS 376ci LS3 Join Date: Mar 2008 Location: Prince William, VA Posts: 2,703 View My Garage	http://sparksrestorations.com/ __________________ 6000 Vehicle Delivered to Customer 6-23-10

08-10-2011, 11:43 AM	#2
sscamaro Drives: 2010 2SS, 2017 Silverado LTZ Join Date: Jan 2007 Location: Denver,PA Posts: 3,195 View My Garage	Clean Cut Creations has them like mine.

11-16-2011, 04:40 PM	#6
irocnroll Drives: '91 RS Vert, '11 Grand Cherokee Join Date: May 2009 Location: Connecticut Posts: 2,343 View My Garage	Haven't seen anyone really post a solution to getting the offset RS logo on the grill. Does anyone make an easy clip on solution for this?

11-21-2011, 11:36 PM	#10
Cyber/Orange10 Cyber/orange10 Drives: 2010 2SS 96 CE LT4, 12 CRUZE ECO Join Date: Feb 2010 Location: Freeport,Il 61032 Posts: 213	I just used the original.....

11-21-2011, 11:47 PM	#11
pnyklr Drives: A Gift From My Wife Join Date: Apr 2009 Location: Powder Springs, GA Posts: 1,557	Mine is the same as Cyber. I just used the original SS emblem, trimmed it down and installed it. Not sure how Cyber has his attached but mine is held in with a piece of clay bar and has not moved in 2000 miles. At some point I will find a more permanent way to mount it. But for now it works just fine. -Funk __________________ 2012 Convert 2SS/RS SW/IO LS3 - Build #1081 07/21/2011 - (3800) Order produced and vehicle is being prepared for shipping. 08/09/2011 - (4200) Shipped (vehicle is shipped to the dealer or interim point of delivery). 08/16/2011 - (5000) Vehicle has been delivered to dealer. 08/19/2011 - In my possession.

11-22-2011, 04:15 PM	#12
sscamaro Drives: 2010 2SS, 2017 Silverado LTZ Join Date: Jan 2007 Location: Denver,PA Posts: 3,195 View My Garage	Clean Cut Creations makes one for the Heritage Grille. Pressure sensitive tape on the back.

11-23-2011, 03:23 PM	#13
VR Baron SoCal Camaro5 Race Team Drives: 2021 Shadow Grey Camaro 2SS 1LE Join Date: Mar 2010 Location: SO CAL Posts: 14,367	I just trimmed the two long mount tabs on the stock emblem to fit in betwen the louvres, now looks like a watch band. They then tie together in back using a screw to connect to the grill to hold in place. All I could think off at the time.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WHAT ABOUT PUTTING SS IN MIDDLE OF GRILL!	IROCZJEFF	Cosmetics and Lighting Modification Discussions	67	01-17-2015 09:12 PM
SS badging and RS whats up with it?	nards444	5th Gen Camaro SS LS LT General Discussions	89	06-20-2011 05:51 PM
Stock SS Parts – AZ Available	edneyens	Local Marketplace	5	05-16-2011 08:58 PM
White SS badging RED SS Badging???	1BADZL1	5th Gen Camaro SS LS LT General Discussions	19	06-25-2009 02:00 AM
SS with RS options	Rollin Thunder	Cosmetics and Lighting Modification Discussions	19	03-24-2009 04:26 PM