What offset to square up 19x11" wheels? front & rear - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

pdesanctis · 11-10-2011, 05:02 PM

I'm trying to figure out what offsets I will need to square up the front and rear. I will be using 19x11" wheels.

I will be putting on 305/30 r19 tires on all four corners.

Offsets for my stock wheels are: (front) 21x8.5 +38 ; (rear) 21x9.5 +43

When I get home from work tonight I'm going to get under the camaro, do some math, and try and figure it out lol.

I don't care if the tires stick out past the fenders. The important factor is that the rear tires square up with the front tires. Yes, I will be using this camaro at the road course.

The wheels I am looking at are the Forgestar F14's. The F14's in 19x11" have offsets that range from +23 to +55

http://www.forgestar.com/v2/wheelsf14.php

-----------------

It may come to be that these wheels will not allow me to square up 305/30 r19 tires. If that is the case, what alternative wheels do you recommend?

I like the Forgestar's because they are cheap, light, and look good too.

pdesanctis · 11-11-2011, 11:38 AM

Any tips or suggestions?

pdesanctis · 11-14-2011, 11:59 AM

Well, I'm going to bump this because I could really use some help, advice, ect..

Anyone have any insightful knowledge they can pass to me in figuring out what offsets I would need to square up my front and rear wheels. Measurements I should take?

Any help is appreciated.

blazzin1 · 11-14-2011, 03:46 PM

I can't help you because I don't have any experience with 19" fitment. But just from comparing other sizes, I don't think it would be possible to put an 11" wide wheel up front!!! That's too wide, I think it would hit on the strut assembly. But didn't you say you were going to be getting your wheels from Nineball (a.k.a. Tony)??? He's the best person (or vendor) on this website to ensure you get the absolute best fitment for your car. Send him a PM, and tell him what you're after, and he will let you know if it is possible or not.

11-10-2011, 05:02 PM	#1
pdesanctis i like to go fast Drives: 2011 SS Join Date: Sep 2010 Location: jupiter, florida Posts: 154	Help figuring out offset to square the front & rear wheels I'm trying to figure out what offsets I will need to square up the front and rear. I will be using 19x11" wheels. I will be putting on 305/30 r19 tires on all four corners. Offsets for my stock wheels are: (front) 21x8.5 +38 ; (rear) 21x9.5 +43 When I get home from work tonight I'm going to get under the camaro, do some math, and try and figure it out lol. I don't care if the tires stick out past the fenders. The important factor is that the rear tires square up with the front tires. Yes, I will be using this camaro at the road course. The wheels I am looking at are the Forgestar F14's. The F14's in 19x11" have offsets that range from +23 to +55 http://www.forgestar.com/v2/wheelsf14.php ----------------- It may come to be that these wheels will not allow me to square up 305/30 r19 tires. If that is the case, what alternative wheels do you recommend? I like the Forgestar's because they are cheap, light, and look good too. Last edited by pdesanctis; 11-14-2011 at 02:29 PM. Reason: desperate help

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Shno's House of Z	Number 3	Camaro Z/28 Forum - Z/28 Specific Topics	17976	12-27-2021 01:07 PM
Just ordered a Camaro, now I wait...	Slim_	Sverige	23	05-04-2012 02:01 AM
20x11 Rear & 20x10 Front from Scarallo Motorsport Wheel BIG LIPS	Group-A Wheels	Wheels and Tires Talk Sponsored by The Tire Rack	53	12-20-2011 01:21 PM
GM Camaro SEMA Press Release	JusticePete	Suspension / Brakes / Chassis	19	11-23-2011 11:40 AM
Midnight Silver RS 20" wheels front and rear	jsharp	Wheels / Tires	6	01-19-2010 10:24 PM

11-11-2011, 11:38 AM	#2
pdesanctis i like to go fast Drives: 2011 SS Join Date: Sep 2010 Location: jupiter, florida Posts: 154	Any tips or suggestions?

11-14-2011, 11:59 AM	#3
pdesanctis i like to go fast Drives: 2011 SS Join Date: Sep 2010 Location: jupiter, florida Posts: 154	Well, I'm going to bump this because I could really use some help, advice, ect.. Anyone have any insightful knowledge they can pass to me in figuring out what offsets I would need to square up my front and rear wheels. Measurements I should take? Any help is appreciated.

11-14-2011, 03:46 PM	#4
blazzin1 Drives: 2010 2SS/RS R6P Join Date: Nov 2008 Location: St. Cloud, FL Posts: 4,845 View My Garage	I can't help you because I don't have any experience with 19" fitment. But just from comparing other sizes, I don't think it would be possible to put an 11" wide wheel up front!!! That's too wide, I think it would hit on the strut assembly. But didn't you say you were going to be getting your wheels from Nineball (a.k.a. Tony)??? He's the best person (or vendor) on this website to ensure you get the absolute best fitment for your car. Send him a PM, and tell him what you're after, and he will let you know if it is possible or not.