Free Pedders Xa coilovers for someone willing to provide test car

[JusticePete]

I would like to excite some one even more. We are waiting for access to a production 2010 Camaro so we can move into full production on our Xa coilovers. We need to do a FINAL test fit to confirm we have everything spot on. I need access to t Camaro for 24 hours. We will fit a set of Xa coilovers. I will drive the daylights out of it to make certain they are perfect and hand you back your 2010 Camaro with a set of Xa coilovers. You must be willing to bring your Camaro to Witt Buick in Muskegon Michigan.

This is a first come first serve opportunity. Here is my contact information.

PGB@PeddersUSA.com
248.522.8021

They are in the box waiting for your call or email...

[Croathlete]

Originally Posted by JusticePete

I would like to excite some one even more. We are waiting for access to a production 2010 Camaro so we can move into full production on our Xa coilovers. We need to do a FINAL test fit to confirm we have everything spot on. I need access to t Camaro for 24 hours. We will fit a set of Xa coilovers. I will drive the daylights out of it to make certain they are perfect and hand you back your 2010 Camaro with a set of Xa coilovers. You must be willing to bring your Camaro to Witt Buick in Muskegon Michigan.

This is a first come first serve opportunity. Here is my contact information.

PGB@PeddersUSA.com
248.522.8021

They are in the box waiting for your call or email...

I would be more than willing to do this and even get the rest of the Street II kit installed, but I probably won't be one of the first to get their car.

[JusticePete]

Originally Posted by Croathlete

I would be more than willing to do this and even get the rest of the Street II kit installed, but I probably won't be one of the first to get their car.

We have about 30 pre-sold Xa kit orders to fill. We have everything ready to go and are just waiting to turn on production as soon as we can do a FINAL FIT. Stay tuned. You may be the lucky early delivery car...

[Milk 1027]

I would jump on this if I had my car on order. But I don't. Still waiting for late model year or 2011 model year.

[Info@PeddersUSA.com]

I will be with Pete next week and possibly into the following week from Ca. I would love to be able to assist Pete with the install, and verification process. We got the G8 down to a science right now so we figure the Camaro will be near or at perfection. But we will do this Beta test to make sure!

thanks
mike
dms

[ZZcamaro]

I would do it, but I do not want to drive that far. I live in Pittsburgh, PA. If you can find a way to do it somewhere closer to me then let me know.

[jeffny09]

if i get mines im down

[Milk 1027]

Jeff, do it!!!!

[jeffny09]

absolutly if i get my car anytime soon i will drive there in a heart beat

after all i did order these coil overs sounds like a sweet deal

[Info@PeddersUSA.com]

Pete's and my schedule for the next 4-8 weeks has just become very complicated and packed. As mentioned, we are looking for a Camaro to do a beta install on our Pedders eXtreme Xa Coil Overs. Now this is a beta test, which means we are verifiying the design, settings, and rates are what we want. Now this will not be a normal beta testing. It will be far more advanced than that for 2 reasons: First being we have a massive amount of experience with them not only here in the USA but also in Australia where the ZETA platform has been out there for 2 years or so longer than here, Plus we have installed quite a few in the G8's, which is nearly identical suspension as the Camaro. So we really are expecting a near perfect, if not perfect install. Yesdterday we finished Mustang, which took 2 beta 1 and beta 2, but it is at perfection.

Due to our schedules, we will be doing the installs at one of 2 locations:
Witt Buick in Muskegan MI or at Reeves Buick Pontiac in Greenwood, IN (by Indy)

With the free Xa's, install, and setup time we will be doing, the value of this package is in the $2800 range.

It will be offered to the first Camaro that steps up for the earliest and most convenient date.

Thanks

mike
dms

[Info@PeddersUSA.com]

Pete's and my schedule for the next 4-8 weeks has just become very complicated and packed. As mentioned, we are looking for a Camaro to do a beta install on our Pedders eXtreme Xa Coil Overs. Now this is a beta test, which means we are verifiying the design, settings, and rates are what we want. Now this will not be a normal beta testing. It will be far more advanced than that for 2 reasons: First being we have a massive amount of experience with them not only here in the USA but also in Australia where the ZETA platform has been out there for 2 years or so longer than here, Plus we have installed quite a few in the G8's, which is nearly identical suspension as the Camaro. So we really are expecting a near perfect, if not perfect install. Yesdterday we finished Mustang, which took 2 beta 1 and beta 2, but it is at perfection.

Due to our schedules, we will be doing the installs at one of 2 locations:
Witt Buick in Muskegan MI or at Reeves Buick Pontiac in Greenwood, IN (by Indy)

With the free Xa's, install, and setup time we will be doing, the value of this package is in the $2800 range.

It will be offered to the first Camaro that steps up for the earliest and most convenient date.

Thanks

mike
dms

[jeffny09]

as i said i will b e glad if i get my car soon enough

[kdbolt70]

As I said in the other thread as well, I have a built car and it could be here any day. As soon as I get the email from the dealer that it is in, I will let you guys know. Could you do a saturday test? or would you prefer it during the week? Also, will this lower the Camaro at all?

[JusticePete]

It appears that we will be doing or fitment at a GM facility on Monday!!!!!