BMR Adjustable LCA's installed - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

RaiderSS · 01-30-2012, 12:00 PM

Just completed the final touches on my rear ZetaaII overhaul...
Next up is the front suspension bushing kit and my solid poly motor mounts, and at that point all factory rubber will have been removed from suspension.

10aSSee D · 01-30-2012, 06:33 PM

Looks good, getting ready to do the same thing in a month or so...I have everything in the garage waiting except axles.

BMR guy · 01-31-2012, 08:34 AM

Lots of red under your car...I like it!

Juiced1 · 01-31-2012, 08:36 AM

Looks good! It's gonna handle even better!

BMR Sales · 01-31-2012, 10:18 AM

Man Eddie all those shiny red BMR parts are looking really good up underneath the car! It is too bad you can't see them all the time. Let me know when you are ready for some more parts.

Kyle

kencam · 01-31-2012, 11:04 AM

How long would it take a shop to install your Level 2 package? I'm trying to do a budget.

BMR Sales · 01-31-2012, 01:11 PM

Quote:

Originally Posted by kencam

How long would it take a shop to install your Level 2 package? I'm trying to do a budget.

It would probably take a full day if not a little more so around 8 hours. It just really comes done to how stubborn the the stock bushings want to be to get out.

RaiderSS · 02-02-2012, 09:08 PM

Quote:

Originally Posted by BMR Sales

It would probably take a full day if not a little more so around 8 hours. It just really comes done to how stubborn the the stock bushings want to be to get out.

Exactly! I did all the work myself and at my convenience and the hardest part of any of it was removing the stock cradle bushings. It also helps to have a good machine shop where you can get stuff pressed and shaved for fitment...

I couldn't really give a total in hours but with basic tools and allot of research anyone could do this however its not something you can quit on half way through so if your not committed to modding then just drop it a a reputable shop.

RaiderSS · 02-02-2012, 09:14 PM

Quote:

Originally Posted by BMR Sales

Man Eddie all those shiny red BMR parts are looking really good up underneath the car! It is too bad you can't see them all the time. Let me know when you are ready for some more parts.

Kyle

Oh most definitely! I have a project G8 thats starting next week... Will be calling for sways first.
Just got camaro alignment the other day and she is on rails! Feels great. I can do things at speeds that stockers just cant do... And I haven't even done the front bushing kit yet just the front sways and end-links so far. Your products are quality and all my muscle car comrades want the same performance they see me running with not to mention it just looks great under there!

THANK YOU BMR! Kyle is the man!

RaiderSS · 02-02-2012, 09:15 PM

Quote:

Originally Posted by Juiced1

Looks good! It's gonna handle even better!

This thing is a street beast! Now I just need to replace rear tires and try not to burn through them in 5k miles LOL!

Rockit_z28 · 02-03-2012, 06:11 AM

Great stuff... Another BMR beast

BMR Sales · 02-03-2012, 08:40 AM

Quote:

Originally Posted by RaiderSS

Oh most definitely! I have a project G8 thats starting next week... Will be calling for sways first.
Just got camaro alignment the other day and she is on rails! Feels great. I can do things at speeds that stockers just cant do... And I haven't even done the front bushing kit yet just the front sways and end-links so far. Your products are quality and all my muscle car comrades want the same performance they see me running with not to mention it just looks great under there!

THANK YOU BMR! Kyle is the man!

No problem Eddie, when you are ready to take care of that G8 give me a call and we can get you taken care of.

01-30-2012, 12:00 PM	#1
RaiderSS Drives: 2010 Camaro SS2 DeadBLK Join Date: Nov 2010 Location: Atlanta Posts: 481	BMR Adjustable LCA's installed Just completed the final touches on my rear ZetaaII overhaul... Next up is the front suspension bushing kit and my solid poly motor mounts, and at that point all factory rubber will have been removed from suspension. Attached Images __________________ RaiderSS - COTW 6/6/11 http://www.camaro5.com/forums/attach...1&d=1312764428

01-30-2012, 06:33 PM	#2
10aSSee D Drives: Silver 2010 SS Camaro Join Date: Jul 2009 Location: TN Posts: 2,562	Looks good, getting ready to do the same thing in a month or so...I have everything in the garage waiting except axles. __________________ MODS: ADM built 417, 2.9L Whipple with 3.250 pulley, ADM ported and polished LSA heads,ADM stage3 cam,ADM LSA belt drive system,ADM CAI race scoop, ADM dual fuel pumps, ID 850's, BMR full suspension, Gforce 9 inch kit with 3.5 inch driveshaft, Street Slayer twin carbon clutch, Lingenfelter oil seperator. Tuned by built by ADM Performance, 763rwhp,705rwtq

02-03-2012, 06:11 AM	#11
Rockit_z28 www.1baddogracing.com Drives: 2010 IOM 2SS/RS Auto Join Date: Apr 2011 Location: Indian Land, SC Posts: 998 View My Garage	Great stuff... Another BMR beast __________________ 2010 Camaro 2SS/RS Aqua Blue Metalllic (bolt-ons) 2020 Camaro 2SS/RS Satin Steel Metallic - Shock and Steel Edition 1 of 98 - A10 (bolt-ons) 2010 Camaro 2SS/RS IOM - 1,023 RWHP 813RWTQ (Previous Paxton Record Holder: 9.82@139) Built and Tuned by Heintz Racing Go: DSS 9", RPM Trans TH400, Carlyle Racing 15" Conversion, ECS Vortech YSI-B, Fore Fuel System, ID1700, Gall Racing 427 C.I LSX, Mast 285CC Heads, HR Custom Cam Show: Custom Painted Stripes/Badges (Orange Pearl over White), Z/TA Spoiler, VFN Hood, Weld Wheels http://www.HeintzRacing.com http://www.youtube.com/user/1baddogracing

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BMR Level 1 Handling kit installed	mikeSS	Suspension / Brakes / Chassis	3	01-05-2012 01:34 PM
MY NEW BMR SUSPENSION INSTALLED	BLACK10	Suspension / Brakes / Chassis	28	10-28-2011 09:34 AM
BMR adjustable sway bars stiffness setting question	ssmike	Suspension / Brakes / Chassis	19	03-06-2011 07:41 AM
Pfadt Drop springs, Swaybars and adjustable end link installed!	baranowski	Suspension / Brakes / Chassis	1	09-06-2010 11:44 PM

01-31-2012, 08:34 AM	#3
BMR guy Drives: 2010 1SS Join Date: Jan 2010 Location: Tampa, FL Posts: 1,002	Lots of red under your car...I like it!

01-31-2012, 08:36 AM	#4
Juiced1 Account Suspended Drives: 2012 2SS CAMARO 45th Join Date: Apr 2011 Location: St. Charles, IL Posts: 18,663	Looks good! It's gonna handle even better!

01-31-2012, 10:18 AM	#5
BMR Sales Drives: Race Car Join Date: Sep 2009 Location: Seffner, FL Posts: 6,226	Man Eddie all those shiny red BMR parts are looking really good up underneath the car! It is too bad you can't see them all the time. Let me know when you are ready for some more parts. Kyle

01-31-2012, 11:04 AM	#6
kencam Drives: 2010 2SS/RS M6 Maggie Rally Yellow Join Date: Jan 2012 Location: Bucks, PA Posts: 127	How long would it take a shop to install your Level 2 package? I'm trying to do a budget.