Cup holder cover plate - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

DCC1464 · 02-17-2012, 08:33 PM

So i plan on doing the cup holder lighting and was wonder if anyone has found a good price on a BLACK cover plate. the only ones i can find are by phasteck and defenderworks and are way over priced. not gona pay $100+ for cup holder trim.

Pharmaro · 02-17-2012, 08:43 PM

I used this one, in black

http://www.phastekperformance.com/20...der-bc-113.htm

martinezj454545 · 02-17-2012, 08:44 PM

just go to ebay you will get the same one posted above for 30 bucks less.

The Stig · 02-17-2012, 09:03 PM

Quote:

Originally Posted by martinezj454545

just go to ebay you will get the same one posted above for 30 bucks less.

I'm going to have to call

I've never seen those cup holder bezels go for under $40. Please post the link.

DCC1464 · 02-18-2012, 02:02 AM

Thanks pharmaro I misssed that one I guess when I looked @ there site.
+1 to what stieger said

sjmautoprod · 02-18-2012, 12:32 PM

We have matte or gloss acrylic panels with or without lighting.

http://www.camaro5.com/forums/showthread.php?t=146279

pnyklr · 02-19-2012, 01:28 PM

Does the door pull lighting shine down and therefore the LED is not visible?

-Funk

Gator6977 · 02-19-2012, 03:54 PM

I paid $34 shipped for mine of Ebay. It's of excellent quality as well. Although I was thinking of vinyl wrapping it green when and if I do my panels. But I do shop around a lot...

CaryE1 · 02-19-2012, 11:30 PM

I also got one off of eBay for about 35 bucks, if I remember correctly. It's chrome and i covered it with dinoc CF vinyl. I also installed some lights. I've gotten a lot of compliments on it.

BiG_TiMe · 02-20-2012, 01:21 AM

Quote:

Originally Posted by stieger

I'm going to have to call

I've never seen those cup holder bezels go for under $40. Please post the link.

yea they go cheaper on eBay. May not be similar quality but they're still good

cybercoaster · 02-20-2012, 01:40 PM

Quote:

Originally Posted by Pharmaro

I used this one, in black

http://www.phastekperformance.com/20...der-bc-113.htm

Did you put the LED lights under it?

ttexxan · 02-20-2012, 02:20 PM

I have one that I am not using but is in brushed aluminum. I was getting ready to modify it and dropped it off at a plexi glass place to have cut the shape in order to put LED under pm me if interested

02-17-2012, 08:33 PM	#1
DCC1464 COTW 5/27/13 Drives: '11 S/C SS/RS CGM Join Date: Dec 2010 Location: Phoenix, AZ Posts: 755 View My Garage	Cup holder cover plate So i plan on doing the cup holder lighting and was wonder if anyone has found a good price on a BLACK cover plate. the only ones i can find are by phasteck and defenderworks and are way over priced. not gona pay $100+ for cup holder trim. __________________ 622RWHP/512FTLBS on 91 octane 2.9l Whipple 4" pulley. Vengance VRSP3 cam. Lots of BMR & AAC. Body work by Gary's Customz. Nic D tuned My build thread

02-18-2012, 02:02 AM	#5
DCC1464 COTW 5/27/13 Drives: '11 S/C SS/RS CGM Join Date: Dec 2010 Location: Phoenix, AZ Posts: 755 View My Garage	Thanks pharmaro I misssed that one I guess when I looked @ there site. +1 to what stieger said __________________ 622RWHP/512FTLBS on 91 octane 2.9l Whipple 4" pulley. Vengance VRSP3 cam. Lots of BMR & AAC. Body work by Gary's Customz. Nic D tuned My build thread

02-19-2012, 01:28 PM	#7
pnyklr Drives: A Gift From My Wife Join Date: Apr 2009 Location: Powder Springs, GA Posts: 1,557	Does the door pull lighting shine down and therefore the LED is not visible? -Funk __________________ 2012 Convert 2SS/RS SW/IO LS3 - Build #1081 07/21/2011 - (3800) Order produced and vehicle is being prepared for shipping. 08/09/2011 - (4200) Shipped (vehicle is shipped to the dealer or interim point of delivery). 08/16/2011 - (5000) Vehicle has been delivered to dealer. 08/19/2011 - In my possession.

02-19-2012, 03:54 PM	#8
Gator6977 Drives: 2011 2LT RS Join Date: Apr 2010 Location: Kansas Posts: 331	I paid $34 shipped for mine of Ebay. It's of excellent quality as well. Although I was thinking of vinyl wrapping it green when and if I do my panels. But I do shop around a lot... __________________

02-19-2012, 11:30 PM	#9
CaryE1 Drives: Black 2011 2LT Join Date: Aug 2011 Location: Vancouver, WA Posts: 256	I also got one off of eBay for about 35 bucks, if I remember correctly. It's chrome and i covered it with dinoc CF vinyl. I also installed some lights. I've gotten a lot of compliments on it. __________________

02-17-2012, 08:43 PM	#2
Pharmaro Drives: 2011 CGM 2SS/RS Join Date: Apr 2011 Location: Louisville Posts: 368	I used this one, in black http://www.phastekperformance.com/20...der-bc-113.htm

02-17-2012, 08:44 PM	#3
martinezj454545 Drives: 2011 Camaro LS V6 Join Date: Oct 2010 Location: San Diego Posts: 184	just go to ebay you will get the same one posted above for 30 bucks less.

02-18-2012, 12:32 PM	#6
sjmautoprod Drives: '16 2SS Join Date: Apr 2011 Location: Chicago Suburbs Posts: 2,271	We have matte or gloss acrylic panels with or without lighting. http://www.camaro5.com/forums/showthread.php?t=146279

02-20-2012, 02:20 PM	#12
ttexxan Drives: 2010 Camaro SS/RS Join Date: Oct 2009 Location: Fort Worth Texas Posts: 926	I have one that I am not using but is in brushed aluminum. I was getting ready to modify it and dropped it off at a plexi glass place to have cut the shape in order to put LED under pm me if interested

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
California Laws and Regulation Information.	MikeL	USA - California	176	06-09-2019 11:14 AM
How to Choose the Best Car Cover for Your Camaro	Junkman2008	Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection	27	02-27-2015 03:10 PM
HOWTO: Remove Front License Plate Cover & Plug Holes	tbone587	Cosmetics and Lighting Modification Discussions	15	12-11-2013 05:16 PM
need help installing license plate holder	CamaroCorvetteFerrari	5th Gen Camaro SS LS LT General Discussions	16	12-23-2010 01:59 PM
Tinted plate cover	highmark	Canada	7	06-21-2010 09:23 AM