04-18-2012, 04:31 PM | #1 |
|
Who hits the Redline?
Do you drive it like you stole it? How many times or have you ever redlined your engine?
|
04-18-2012, 04:37 PM | #2 |
Emerald Coast Camaros
Drives: 2010 Camaro 2LT/RS M6 Join Date: Nov 2009
Location: Tallahassee FL
Posts: 9,686
|
Might be a stupid question but are we even able to hit red line? Isn't the limiter there to stop us.
|
04-18-2012, 04:38 PM | #3 |
Account Suspended
Drives: Camaro Join Date: Feb 2012
Location: Earth
Posts: 247
|
No the limiter kicks in once you pass red line.
|
04-18-2012, 04:41 PM | #4 |
Boosted Moderator
Drives: Bone Stock LS3 Join Date: Sep 2009
Location: Marion Tx
Posts: 15,657
|
My motor has seen 7200 several times, according to the data logging we did at the race track....
It wasn't on purpose... but my Tach needle is about 2000 RPM behind the motor when you get on it hard...
__________________
If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley
Horsepower is how fast you hit the wall. Torque is how far you take the wall with you. “If everything seems under control, you're just not going fast enough.” Mario Andretti If you can turn, you ain't going fast enough... |
04-18-2012, 04:46 PM | #5 |
Drives: 2012 2SS M6 Join Date: Dec 2011
Location: Phoenix, AZ
Posts: 768
|
Last week I was just trying to see if my tires would break loose if I floored it at various speeds in 1st gear and I hit the rev limiter twice. I'm going to have to watch that and I'm thinking a shift light would be good. The rev limit happens quick when you start at 4000 RPM in first.
__________________
2012 2SS Convertible
Magnuson, Headers, Cam, JRE Tune. 563 HP. |
04-18-2012, 04:47 PM | #6 |
ALWAYS-N-BOOST
|
Once so far...
__________________
2012 1LS M6 Black-Sold 2013 2LT M6 BluRay- Sold 2015 1SS 1LE M6 Black-Sold 2021 ZLE A10 Riverside Blue - Awaiting Arrival 01/10 |
04-18-2012, 04:52 PM | #7 |
Drives: 2010 ABM CAMARO SS Join Date: Jan 2011
Location: GA
Posts: 652
|
Mine has pinged the limiter a few times.
Smashed it so hard once the engine went into a fail safe mode. Scared the heck out of me.
__________________
415ci PROLINE FORGED SHORTBLOCK W/MILLED HEADS
WHIPPLE SUPERCHARGER / CUSTOM CAM SHAFT LINGENFELTER TWIN FUEL PUMP / SNOW METH INJECTION YANK PYE 3400 STALL / SLP STAGE 2 BLACKWING C.A.I. ARH LONGTUBE HEADERS w/MAGNAFLOW CATBACKS HAWK PADS w/STAINLESS LINES & TRIP-DRILL ROTORS PFADT COIL SPRINGS, SWAY BARS & TRAILING ARMS 703-RWHP/685-RWTQ @ 13LBS |
04-18-2012, 04:54 PM | #8 |
Banned
Drives: 1991 New Yorker, 69 Tbird, ABM2SSRS Join Date: May 2009
Location: BC Canada
Posts: 2,248
|
a few times I have encountered the fuel cut off
|
04-18-2012, 04:57 PM | #9 |
Drives: 2011 VR Camaro 1SS/RS M6 Join Date: Jul 2011
Location: Ontario, Canada
Posts: 576
|
Maybe a handful of times, while doing Launch control
__________________
2011 Camaro 1SS with RS - K&N Typhoon CAI, Borla Atak Exhaust, Hawk Performance Ceramic Pads, SLP 'SS' Front Grille Emblem, Blue LED interior lighting, Camaro Victory Red Seatbelt Harness pads NEXT - Corvette LS3 Victory Red Fuel Rail Covers(Awaiting Installation), Window Tinting, Custom Leather Interior. |
04-18-2012, 05:03 PM | #10 |
Emerald Coast Camaros
Drives: 2010 Camaro 2LT/RS M6 Join Date: Nov 2009
Location: Tallahassee FL
Posts: 9,686
|
|
04-18-2012, 05:06 PM | #11 |
Drives: 2012 2SS M6 Join Date: Dec 2011
Location: Phoenix, AZ
Posts: 768
|
Just to clear up something, when does the limiter hit on an LS3? I was too surprised to look.
__________________
2012 2SS Convertible
Magnuson, Headers, Cam, JRE Tune. 563 HP. |
04-18-2012, 05:15 PM | #12 |
|
Hit it a few times when I first got the car. Seemed just like hitting the brakes, and right where the engine has peak power. Still, I don't need to break something.
|
04-18-2012, 05:49 PM | #13 |
Drives: 2011 Cyber Gray 2SS 6 speed Join Date: Jan 2012
Location: Chelmsford MA
Posts: 504
|
The computer should keep it from going past 6600 RPMs or at least that is what I thought. I had my '96 LT4 corvette dynoed last year and the operator took it to the red line. When I looked at the results,you could see the hp and torque lines climbing then they both went straight down. He said that is when your computer shut it down when it hit the red line. So I assume the Camaro would do the same thing right? Anyone here ever have their Camaro dynoed and can attest to this?
Bob |
04-18-2012, 05:54 PM | #14 |
Thread Ender
Drives: 2010 Camaro 2SS/RS L99 Join Date: May 2011
Location: South Jersey
Posts: 1,038
|
Half a dozen times in the first 6k miles.... since then, or probably earlier, not to much. I dont hesitate to take her to 5k often though. 6K not soo often. Cheers.
|
|
|
|
|