Plenum Spacer Question - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JohnZ · 07-21-2012, 07:31 PM

Hey guys, does anyone know the parts numbers for the factory plenum gasket and that x-wing thing? I want to use all gaskets and not worry about the gasket maker issues.

Ventmaster · 07-21-2012, 09:14 PM

Base gasket for intake manifold only is 1259-0958.

A kit containing same base gasket, X-gasket, and plenum lid gasket is
1261-5968.

JohnZ · 07-22-2012, 05:12 AM

Thanks Ventmaster! I wish I knew about this kit earlier, I already bought the manifold gasket. I just need the other 2 (plenum gasket and x-wing).

Chang · 07-22-2012, 06:04 PM

Wondering about the 2nd x-wing, is it necessary?

Lil' Nasty · 07-22-2012, 06:30 PM

Quote:

Originally Posted by Chang

Wondering about the 2nd x-wing, is it necessary?

No I run without mine

Chang · 07-22-2012, 09:05 PM

Did u use a 2nd plenum gasket?

Quote:

Originally Posted by Franklin's Bee

No I run without mine

Chang · 07-26-2012, 05:16 PM

I bought the lower IM gasket 1259-0958 already. Trying to buy the plenum gasket and X-wing gasket separately but really can't find anywhere sells them separately, so I ended up bought a set of gasket kit 1261-5968 which contains another lower IM gasket. Anyways, i guess i will use NEW lower IM gaskets both bottom and top of the Black Ice-o-lator.

Lil' Nasty · 07-26-2012, 06:56 PM

Quote:

Originally Posted by Chang

Did u use a 2nd plenum gasket?

I deleted the x-gasket, kept the plenum square gasketon simply because It doesn't cause a problem like the x-wing and it's easy to , Installation: plenum cover, plenum square gasket, rtv or gasket maker to the plenum spacer, apply 4 washers onto the center most four holes with rtv or gasket maker apply to manifold, tighten everything up AND MAKE SURE the four washers don't fall into the block!!

(that's why I didn't use the x-gasket, fear of knocking the washer into the block)

07-21-2012, 07:31 PM	#1
JohnZ Drives: 2010 Camaro 2LT V6 Join Date: Jul 2009 Location: California Posts: 439	Plenum Spacer Question Hey guys, does anyone know the parts numbers for the factory plenum gasket and that x-wing thing? I want to use all gaskets and not worry about the gasket maker issues. __________________ Injen CAI, V-Max Throttle Body, Rx 25mm Iceolator, Rx 10mm Plenum Spacer, Mace Ported Manifold, ARK N-II Catback, Trifecta Tune, Rx Catch Can. BMR Bushing Inserts,Pedders Radius Rod Inserts, Pfadt Sway Bars and Endlinks, LSR Front Subframe Brace SS Brembo Brakes, Racing Brake Stainless Lines

07-22-2012, 05:12 AM	#3
JohnZ Drives: 2010 Camaro 2LT V6 Join Date: Jul 2009 Location: California Posts: 439	Thanks Ventmaster! I wish I knew about this kit earlier, I already bought the manifold gasket. I just need the other 2 (plenum gasket and x-wing). __________________ Injen CAI, V-Max Throttle Body, Rx 25mm Iceolator, Rx 10mm Plenum Spacer, Mace Ported Manifold, ARK N-II Catback, Trifecta Tune, Rx Catch Can. BMR Bushing Inserts,Pedders Radius Rod Inserts, Pfadt Sway Bars and Endlinks, LSR Front Subframe Brace SS Brembo Brakes, Racing Brake Stainless Lines

07-21-2012, 09:14 PM	#2
Ventmaster Drives: 2017 1SS 6spd Join Date: Jan 2011 Location: Utah Posts: 3,024	Base gasket for intake manifold only is 1259-0958. A kit containing same base gasket, X-gasket, and plenum lid gasket is 1261-5968.

07-22-2012, 06:04 PM	#4
Chang Drives: 2010 Camaro V6 LLT Rally Yellow Join Date: Jul 2011 Location: Vancouver, BC, Canada Posts: 90	Wondering about the 2nd x-wing, is it necessary?

07-26-2012, 05:16 PM	#7
Chang Drives: 2010 Camaro V6 LLT Rally Yellow Join Date: Jul 2011 Location: Vancouver, BC, Canada Posts: 90	I bought the lower IM gasket 1259-0958 already. Trying to buy the plenum gasket and X-wing gasket separately but really can't find anywhere sells them separately, so I ended up bought a set of gasket kit 1261-5968 which contains another lower IM gasket. Anyways, i guess i will use NEW lower IM gaskets both bottom and top of the Black Ice-o-lator.