You are browsing camaro5 
 |
|
08-06-2012, 05:52 PM
|
#1 |
 Drives: 2013 zl1 a6 Join Date: Aug 2012
Location: Louisiana
Posts: 47
|
Converter swap
Does anyone know if the factory zr1 and cts-v torque converter will fit the camaro ss 5th gen
|
|
|
|
08-06-2012, 06:57 PM
|
#2 |
|
Account Suspended
Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009
Location: Bradenton, FL
Posts: 6,063
|
Have to ask why?
It is the same and will not benefit you at all as far as performance.....what are you looking to do? |
|
|
|
|
08-06-2012, 07:07 PM
|
#3 |
|
Drives: 2013 zl1 a6 Join Date: Aug 2012
Location: Louisiana
Posts: 47
|
Im looking to supercharge and I already have it but I wanna get a new converter along with some other things first. And I figure the stall off of the zr1 has to be prettyl close to what I need since we will have almost the same hp and set up
|
|
|
|
|
08-07-2012, 04:55 PM
|
#4 |
|
Drives: 2013 zl1 a6 Join Date: Aug 2012
Location: Louisiana
Posts: 47
|
BumP
|
|
|
|
|
08-07-2012, 05:40 PM
|
#5 |
|
Account Suspended
Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009
Location: Bradenton, FL
Posts: 6,063
|
The stall is the same. It is the same 6L80E trans and converter.
If you want to optimize acceleration then you would need to go with a (roots type top mount SC) 2800 stall triple disc to hold the power. A top mount SC makes torque down low so a higher stall than 2800 would bring you past the sweet spot for utilizing that tq. If you were NA, then a 3600. 
|
|
|
|
|
08-07-2012, 05:45 PM
|
#6 |
|
Drives: 2013 zl1 a6 Join Date: Aug 2012
Location: Louisiana
Posts: 47
|
Preciate it
|
|
|
|
|
|
|
|
 |
|
|
