09-11-2012, 01:15 PM | #1 |
Drives: 2013 LS base model Join Date: Sep 2012
Location: Atlanta
Posts: 16
|
ZISL/PAC what else?
Non-BA system 2013 LS. Have a Fosgate 5 channel on the way and some Polk 6.5 DXi components on the way as well. Going to get Polk 6x9 DXi's in a couple days.
I know I need one or the other, don't know which one is for me. Any insight into the pros and cons would be helpful. What else am I going to need? I am going to get some FatMat. I know I need a dist block. But are there any opinions on the best way to get signal to the amp from the factory stereo? Any special connectificators I need for the speakers? Wanting to keep it as clean and stealthy as possible with minimal harness hacking. Oh and a decent sub recommendation for either one of these scenarios: 200 Watts x 1 @ 4-Ohm or 300 Watts x 1 @ 2-Ohm ? Don't need to rock the block just going for better sq and volume than stock. I listen to everything except country and Bieber Thanks! |
09-11-2012, 04:28 PM | #2 |
|
If your amp supports high level inputs, I recommend both. Check out my thread
|
09-15-2012, 10:21 AM | #3 |
Drives: 2013 LS base model Join Date: Sep 2012
Location: Atlanta
Posts: 16
|
Been in FL a couple days for work, so I missed the reply. My amp does not support high level inputs.
|
09-15-2012, 11:04 AM | #4 |
|
What amp do you have?
|
09-21-2012, 07:52 AM | #5 |
Drives: 2013 LS base model Join Date: Sep 2012
Location: Atlanta
Posts: 16
|
|
09-21-2012, 01:31 PM | #6 |
Drives: 2013 LS base model Join Date: Sep 2012
Location: Atlanta
Posts: 16
|
Nevermind, I got smart and talked to Steve @******** and just ordered the non BA amp integration kit and some GLIs.
Along with an assload of other things lol |
09-21-2012, 09:21 PM | #7 |
|
|
09-22-2012, 09:05 AM | #9 |
Account Suspended
Drives: 2011 2SS IOM Vert Join Date: Aug 2009
Location: Indiana
Posts: 1,096
|
I never officially posted them here because I was worried the demand would outpace the number of kits we could build. This is a lot different than the ba harnesses since most of the work is done in-house. When we get real busy, we may not have time to do them at all. So for now I just wanted to take it slow. I do have 4 more kits that will be finished next week if anyone needs one or has questions.
|
|
|
|
|