SS fender badges installed-pictures - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

larietrope · 06-04-2009, 05:52 PM

The fender should have SS badges so I fixed it. They are standard issue SS trim from dealer.

Leolee · 06-04-2009, 05:53 PM

i like it but it overpowers the camaro signature too much

GamecockFan · 06-04-2009, 05:55 PM

err, upside down? something isn't right...

the closed part where the Ss touch should be on the bottom

greg_74 · 06-04-2009, 05:55 PM

Looks good, it does look like it might be upsidedown though... I was talking to my step dad about it this last weekend when we were looking at his and he said something about doing this. The only thing is I think it is almost too much badging. I think it would look better with just the SS but idk it doesn't look bad though.

Wood · 06-04-2009, 05:55 PM

Look like they are upside down

jimhowie2000 · 06-04-2009, 05:56 PM

Looks just the way the factory should have done it. My "07 Cobalt SS had the same badges on the lower doors and I thought they looked good there. I like the way these look under the Camaro badge. Just the same placement as the older cars and similar to my 69 Impala SS.

stikSS · 06-04-2009, 05:57 PM

Quote:

Originally Posted by Wood

Look like they are upside down

You are correct......

phatman · 06-04-2009, 05:59 PM

Quote:

Originally Posted by larietrope

The fender should have SS badges so I fixed it. They are standard issue SS trim from dealer.

Sorry dude - they look like they are from an Impala and they are upside down...

iupui1299 · 06-04-2009, 05:59 PM

Those are upside down....don't worry you're not the first member here to do that.

jdurhan · 06-04-2009, 06:00 PM

Quote:

Originally Posted by GamecockFan

err, upside down? something isn't right...

the closed part where the Ss touch should be on the bottom

Thats it, I knew something looked strange. They're upside down.

JJ#48Racing · 06-04-2009, 06:12 PM

Turn them right side up and it will look good. Personally though I'd rather take the Camaro badges off and just have the SS badges there. That's what I plan on doing. Right side up of course

ljustin293 · 06-04-2009, 06:13 PM

the second person to install them upside down

jpsuperman81 · 06-04-2009, 06:15 PM

Looks out of place should be same color/style of lettering as camaro then it would look top notch.

GothamCamaro · 06-04-2009, 06:17 PM

Quote:

Originally Posted by ljustin293

the second person to install them upside down

OMG. Again? At least the first guy won't feel alone on this but seriously guys... look at the SS badges really hard before adding them on.

06-04-2009, 05:52 PM	#1
larietrope Drives: 1970 Boss 302 Join Date: May 2009 Location: South Carolina Posts: 269	SS fender badges installed-pictures The fender should have SS badges so I fixed it. They are standard issue SS trim from dealer. Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SS badging on/near Gauge Cluster	UCF w00t	5th Gen Camaro SS LS LT General Discussions	56	08-15-2011 08:46 PM
New Camaro intro-article and PICTURES!	Mr. Wyndham	5th Gen Camaro SS LS LT General Discussions	13	03-20-2009 03:39 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 07:56 PM
My Houston Auto Show pictures	Superman09	Camaro Photos \| Spyshots \| Video \| Media Gallery	41	02-04-2009 12:10 AM

06-04-2009, 05:53 PM	#2
Leolee Drives: camaro Join Date: May 2009 Location: us Posts: 852 View My Garage	i like it but it overpowers the camaro signature too much

06-04-2009, 05:55 PM	#3
GamecockFan Drives: 2G1FK1EJ7A9117103 Join Date: Apr 2009 Location: Columbia, SC Posts: 123	err, upside down? something isn't right... the closed part where the Ss touch should be on the bottom

06-04-2009, 05:55 PM	#4
greg_74 Drives: 2002 Camaro SS Join Date: Jan 2009 Location: Indiana Posts: 168 View My Garage	Looks good, it does look like it might be upsidedown though... I was talking to my step dad about it this last weekend when we were looking at his and he said something about doing this. The only thing is I think it is almost too much badging. I think it would look better with just the SS but idk it doesn't look bad though. __________________ 2002 Chevrolet Camaro SS #7590 345 HP Package, LPP Headers and ORY, GMMG, SLP CAI and Smooth Bellows, PHB, Chrome TTM's

06-04-2009, 05:55 PM	#5
Wood Drives: 2SS/RS Join Date: May 2009 Location: CO Posts: 25	Look like they are upside down

06-04-2009, 05:56 PM	#6
jimhowie2000 Drives: '10 Camaro 2LT/RS & 6 older Chevy's Join Date: Feb 2009 Location: Mount Vernon, Ohio Posts: 75	Looks just the way the factory should have done it. My "07 Cobalt SS had the same badges on the lower doors and I thought they looked good there. I like the way these look under the Camaro badge. Just the same placement as the older cars and similar to my 69 Impala SS.

06-04-2009, 05:59 PM	#9
iupui1299 Drives: 2022 Camaro SS Convertible Indy 500 Join Date: Apr 2009 Location: Indianapolis Posts: 227	Those are upside down....don't worry you're not the first member here to do that.

06-04-2009, 06:12 PM	#11
JJ#48Racing Drives: 1998 Camaro SS Join Date: Oct 2008 Location: Lancaster, CA Posts: 1,115	Turn them right side up and it will look good. Personally though I'd rather take the Camaro badges off and just have the SS badges there. That's what I plan on doing. Right side up of course

06-04-2009, 06:13 PM	#12
ljustin293 Drives: 2010 VR CAMARO 2SS/RS Join Date: Aug 2008 Location: GA Posts: 15,060 View My Garage	the second person to install them upside down

06-04-2009, 06:15 PM	#13
jpsuperman81 Yep I'm back! Drives: 2017 Krypton Green 1SS 1LE Join Date: Mar 2009 Location: Indian Trail, NC Posts: 2,565 View My Garage	Looks out of place should be same color/style of lettering as camaro then it would look top notch.