11-08-2012, 03:37 PM | #1 |
Drives: 2010 Camaro 2SS/RS Black on Black Join Date: Jan 2010
Location: Virginia
Posts: 212
|
2010 2SS (LS3) Stock Parts for Sale
All,
I'm looking to sell my stock parts. All are 100% in working order and were replaced for modifications. Complete Stock Exhaust System (Manifold, gaskets, all 4 cats, pipes and mufflers. I am willing to sell the whole system or in parts (everything except the O2 sensors and rubber mounting clips). Windshield washer reservoir (W/o the motor). Underdrive Pulley (pulley only). Air filter and box (complete stock cold air intake system).
__________________
2010 Camaro 2SS/RS
Black on Black Performance Mods: CAI, ADM Scoop, Rotofab Washer Kit, Cat Back Borla ATK, SLP Underdrive Pulley, SCT Tune, DynaTech Long Tube Headers and High Flow Cats. Appearance Mods: Razzi Bodykit with LEDs, 3D Carbon Side Vents, Tint, Painted Rims and Calipers, See/hear my Camaro at http://youtu.be/wn0Ck-cw6WQ |
11-20-2012, 01:40 PM | #2 |
Drives: 2010 Camaro 2SS/RS Black on Black Join Date: Jan 2010
Location: Virginia
Posts: 212
|
Sold for $25.00 - Air filter and box (complete stock cold air intake system).
Still available - Complete Stock Exhaust System (Manifold, gaskets, all 4 cats, pipes and mufflers. I am willing to sell the whole system or in parts (everything except the O2 sensors and rubber mounting clips). Still available -Windshield washer reservoir (W/o the motor). Still available - Underdrive Pulley (pulley only).
__________________
2010 Camaro 2SS/RS
Black on Black Performance Mods: CAI, ADM Scoop, Rotofab Washer Kit, Cat Back Borla ATK, SLP Underdrive Pulley, SCT Tune, DynaTech Long Tube Headers and High Flow Cats. Appearance Mods: Razzi Bodykit with LEDs, 3D Carbon Side Vents, Tint, Painted Rims and Calipers, See/hear my Camaro at http://youtu.be/wn0Ck-cw6WQ |
11-23-2012, 01:51 PM | #3 |
Drives: 2010 Camaro 2SS Join Date: Jun 2010
Location: Navarre, FL
Posts: 745
|
Is there anyway that you would be willing to sell me the pipe that bolts to the manifold? I don't need the cats though
|
01-11-2013, 04:47 PM | #4 | |
Drives: 2012 2LT/RS Join Date: May 2012
Location: Jacksonville
Posts: 76
|
Quote:
ill take your cat back exhaust minus the mufflers |
|
01-11-2013, 06:42 PM | #5 |
|
Let me know what you'll take for the exhaust manifolds only.
Ed M.
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers, rotors & pads, BMR Trailing & Toe Arms, rear cradle & diff bushes, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, GTO clutch reservoir, LS9 cam, Comp valve springs, Melling 10296 oil pump, CR5 timing chain, LS6 damper, CAI Cold Air Intake, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 whls, 275/40/20 & 315/35/20 tires, 2011 Convertible spoiler, 1LE front spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat, wrapped console & Grant steering wheel.
|
01-23-2013, 01:03 PM | #6 |
I would be interested in mufflers if tip are still on them and how much?
|
|
|
|
|
|