If you have a JANNETTY RACING ZL-1 Power Package post your results here - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JANNETTYRACING · 12-03-2012, 03:13 PM

I would like to get some feedback from you guys.

I am selling a lot of parts, So We would Love to hear about them.

Ted.

firecross91 · 12-04-2012, 12:07 PM

Not installed yet. May wait till spring and add a few more items like the Big Gulp. Thanks for hooking me up with the harmonic balancer bolt. I got it this morning.

JANNETTYRACING · 12-04-2012, 12:11 PM

Quote:

Originally Posted by firecross91

Not installed yet. May wait till spring and add a few more items like the Big Gulp. Thanks for hooking me up with the harmonic balancer bolt. I got it this morning.

Your welcome, Now get to work

not fast · 12-04-2012, 05:38 PM

stock 513.7 roto-fab & %5 ati pulley 542.1

Blown355 · 12-04-2012, 06:43 PM

Stock 500rwhp, 8.6 metco pulley ( no tune) 552rwhp.

yellow69z28rs · 12-04-2012, 09:54 PM

[Stock 500rwhp, 8.6 metco pulley ( no tune) 552rwhp]

Is this the only mod you did to p/up 52 HP? No tune?
Did you dyno before and after?

JANNETTYRACING · 12-05-2012, 08:22 AM

Quote:

Originally Posted by yellow69z28rs

[Stock 500rwhp, 8.6 metco pulley ( no tune) 552rwhp]

Is this the only mod you did to p/up 52 HP? No tune?
Did you dyno before and after?

Check out this thread http://www.camaro5.com/forums/showthread.php?t=259566

Blown355 · 12-05-2012, 01:08 PM

Quote:

Originally Posted by yellow69z28rs

[Stock 500rwhp, 8.6 metco pulley ( no tune) 552rwhp]

Is this the only mod you did to p/up 52 HP? No tune?
Did you dyno before and after?

Upgraded HX and pump also. No tune. The stock dyno was in May, after dyno was last month.

Nemisis · 12-05-2012, 01:56 PM

Got a metco 9.55, JRE custom tune and Air raid CAI but no dyno numbers. Still trying to data log it to make sure it looks good before I get crazy with it. After this will be 2" headers, injectors and 2.50" upper pulley.

ace32x · 12-05-2012, 02:05 PM

have the inovator west 9.1 lower balancer from you guys anda 5 gal of torco! also rotofab intake from rotofab, love the power everything has been great except for a little belt slip i keep getting up top but i think that may be due to the damp and rainy weather up here right now

Nemisis · 12-06-2012, 08:22 PM

Got my car a date with the dyno dec 27th, then I'll have results, woot!

JANNETTYRACING · 12-07-2012, 08:52 AM

Quote:

Originally Posted by Nemisis

Got my car a date with the dyno dec 27th, then I'll have results, woot!

Be sure and log while on the dyno and obtain AFR and Boost on Dyno Sheet and send them to me for evaluation.

Thank You
Ted.

Skylane765 · 12-08-2012, 08:57 PM

Have the CAI, will do Torco and 5% pulley in the next week or two.

What does the 2.50 upper pulley gain with no lower pulley change?

What is the difference between the 2.5 upper and the 5% lower?

hognutz · 12-09-2012, 03:49 AM

Quote:

Originally Posted by Skylane765

Have the CAI, will do Torco and 5% pulley in the next week or two.

What does the 2.50 upper pulley gain with no lower pulley change?

What is the difference between the 2.5 upper and the 5% lower?

the 2.55 upper is 18% overdrive as opposed to 5%. too much boost for no tune.

12-03-2012, 03:13 PM	#1
JANNETTYRACING Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009 Location: ON THE DYNO WATERBURY CT. Posts: 15,410	If you have a JANNETTY RACING ZL-1 Power Package post your results here I would like to get some feedback from you guys. I am selling a lot of parts, So We would Love to hear about them. Ted. __________________ www.jannettyracing.com Celebrating 39 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com Last edited by JANNETTYRACING; 12-10-2014 at 12:04 PM.

12-04-2012, 12:07 PM	#2
firecross91 Drives: ZL1 #1691 Black on black. Join Date: Jun 2012 Location: WNY Posts: 522	Not installed yet. May wait till spring and add a few more items like the Big Gulp. Thanks for hooking me up with the harmonic balancer bolt. I got it this morning. __________________ When 580HP ain't enough. JRE 75 RWHP No Tune kit: Featuring ATI, RotoFab, and Torco.

12-04-2012, 06:43 PM	#5
Blown355 Drives: 2017 ZL1 A10 Join Date: Sep 2009 Location: Austin TX Posts: 866	Stock 500rwhp, 8.6 metco pulley ( no tune) 552rwhp. __________________ 2017 ZL1 A10 Redhot with stripe

12-04-2012, 09:54 PM	#6
yellow69z28rs Drives: 2013 ZL1 Convertible Black Join Date: Nov 2012 Location: Alexandria La. Posts: 364	[Stock 500rwhp, 8.6 metco pulley ( no tune) 552rwhp] Is this the only mod you did to p/up 52 HP? No tune? Did you dyno before and after? __________________ JRE 750 HP package Rag Top Rob

12-05-2012, 02:05 PM	#10
ace32x Drives: 2013 ZL1 Join Date: Oct 2012 Location: puyallup Posts: 543	have the inovator west 9.1 lower balancer from you guys anda 5 gal of torco! also rotofab intake from rotofab, love the power everything has been great except for a little belt slip i keep getting up top but i think that may be due to the damp and rainy weather up here right now __________________ C6Z06 400ci, twin gen 2 promod 88's,th400, Alky car

12-04-2012, 05:38 PM	#4
not fast Drives: 69 z28 & pace car Join Date: Nov 2011 Location: va beach Posts: 24 View My Garage	stock 513.7 roto-fab & %5 ati pulley 542.1

12-05-2012, 01:56 PM	#9
Nemisis Drives: 2013 Ashen Gray Metallic-M6 Join Date: Aug 2012 Location: Artesia, NM Posts: 171	Got a metco 9.55, JRE custom tune and Air raid CAI but no dyno numbers. Still trying to data log it to make sure it looks good before I get crazy with it. After this will be 2" headers, injectors and 2.50" upper pulley.

12-06-2012, 08:22 PM	#11
Nemisis Drives: 2013 Ashen Gray Metallic-M6 Join Date: Aug 2012 Location: Artesia, NM Posts: 171	Got my car a date with the dyno dec 27th, then I'll have results, woot!

12-08-2012, 08:57 PM	#13
Skylane765 Drives: ZL1-1LE, Z/28 Join Date: May 2012 Location: San Diego Posts: 3,262 View My Garage	Have the CAI, will do Torco and 5% pulley in the next week or two. What does the 2.50 upper pulley gain with no lower pulley change? What is the difference between the 2.5 upper and the 5% lower? Last edited by Skylane765; 12-08-2012 at 09:13 PM.