12-17-2012, 05:47 PM | #1 |
Drives: 2013 SS Join Date: Nov 2012
Location: florida
Posts: 35
|
New member mod question
Hello, I'm a new owner of a 2013 camaro SS but not new to the mod world. I have a 2009 Shelby gt500 with a long list of mods. I'm not looking to put a blower on the camaro as it is my daily driver but I would like to increase the rwhp.
My plan is a cold air intake, port the throttle body and long tubes with an off road x pipe. Then at some point get a custom grind on the cams. So the question is what kind of rwhp will I gain from the CAI, ported TB, longtubes with x pipe and a tune? Or is this the wrong direction? Thanks in advance |
12-17-2012, 06:13 PM | #2 |
"Black Ace"
Drives: Supercharged 2010 SS, 2016 Golf R Join Date: Aug 2008
Location: Ft. Lauderdale, FL
Posts: 1,352
|
That sounds like a very good start. Do you have an auto or manual tranny? If you have a manual, I would expect between 395-415 rwhp, depending on the dyno and whether your car is a dyno dud (like mine) or a factory freak. If you have an auto, subtract about 20-30 rwhp from that estimate...
Before you do a cam, you might want to consider gears and/or a stall converter (if you have an auto). For a manual, most go with 3.91s or 4.10/4.11. Autos--around 3.70
__________________
2010 2SS/RS M6 "Black Ace" - Delivered 6/4/2009
Mods: Forged 416 LS3, Maggie TVS 2300 SC (~11 psi), custom cam (232/247, .630/.630, 118 LSA), 90-lb. injectors, ZL1 fuel pump & ADM controller, Alky Control meth kit, Monster LT1-SC twin-disk clutch, ZL1 drivetrain conversion w/ DSS 1000-HP axles & 1-pc. driveshaft, CAI Inc. intake w/ ADM scoop, XS Power full exhaust (1 7/8" LT headers with 3" off-road pipes), VMAX CNC-ported TB, LSR adjustable sway bars, LPE rear end-links, BMR 1" drop, BMR polyurethane bushings; UMI trailing arms & toe rods. Built & tuned by Kraftworks. 755 rwhp/708 rwtq |
12-17-2012, 06:16 PM | #3 | |
Drives: 2010 SS/RS M6/2500HD Lmm LTZ Join Date: Apr 2012
Location: South Georgia
Posts: 2,543
|
Quote:
__________________
Last edited by GaBoy25; 12-17-2012 at 06:17 PM. Reason: Added motor type goofy |
|
12-17-2012, 09:16 PM | #4 |
Drives: 2013 SS Join Date: Nov 2012
Location: florida
Posts: 35
|
I have a manual transmission, I never thought to change the gearing, a 3.91 sounds like it would be right on.
A local shop said a custom cam grind would cost $1995, seems high is that a fair price? So far I am very impressed with the car and I do love the body style. The car came with a hurst short throw shifter and an upgraded exhaust- the mufflers have 2 tail pipes each it kinda looks like a vette exhaust. It also had the GM heritage grill which I took off and put the original back on- if anybody wants it I will give it away, it was on the car for a week- no blemishes, |
12-17-2012, 09:25 PM | #5 | |
|
Quote:
Also, how can I get that grille from you if still available?
__________________
2016 Camaro 1SS Hyper Blue 6MT NPP
2010 Camaro 2SS Cam/Headers/CAI/3.91 gears 476 rwhp/440 rwtq (sold) |
|
12-17-2012, 09:39 PM | #6 |
Drives: 2013 SS Join Date: Nov 2012
Location: florida
Posts: 35
|
The $1995 includes installation, so maybe it's not so bad. The grille is available, I live in Florida so if your far away you just pay the shipping. The grille is white and is wrapped up.
You can reach me at my work number 941-756-5511 x 1106 my names Damion, just call me tomorrow and well figure it out |
12-17-2012, 11:18 PM | #7 |
Drives: Black aSS 2011 - L99 Join Date: Apr 2012
Location: Texas
Posts: 330
|
I want the grill! PM me......
|
12-18-2012, 08:27 AM | #8 |
Drives: 2013 SS Join Date: Nov 2012
Location: florida
Posts: 35
|
SS Dan has dibs on it, if he doesn't call me then its yours 05silverstreak, ill let you know, just check thus thread later today.
|
12-18-2012, 08:38 AM | #9 |
Moderator
|
You should be gaining a lot of power, but it's going to come down to which brands and how you get it tuned. You should make sure you have a reputable dyno tuner do you tune for the best results. After all of this work, you're going to be very happy with the performance.
__________________
RDP Motorsport//GEN5DIY//Cultrag Performance//JPSS//Rodgets Chevrolet//
Operation Demon//Buy at Invoice//RACECARWEAR RESPECT ALL CARS. LOVE YOUR OWN. warn 145:159 ban |
12-18-2012, 09:27 AM | #10 |
Drives: 2013 SS Join Date: Nov 2012
Location: florida
Posts: 35
|
Ok SS Dan has a black car. So silver streak just give me a call to work out where to ship
|
12-27-2012, 04:38 PM | #11 |
Drives: faster than dirt... Join Date: Jun 2012
Location: Valdosta,GA
Posts: 73
|
You are definitely headed in the right direction! Intake, tune, exhaust, and port that throttle body should yield some solid gains. I have an awesome deal on a clearance catback and can package an intake for an even better deal. Shoot me a pm or call
|
12-30-2012, 03:25 PM | #12 |
Drives: 2013 SS Join Date: Nov 2012
Location: florida
Posts: 35
|
Are you a vendor? Which company?. Email me your info cause I'm a month or so away from buying, thanks
Damion |
12-30-2012, 03:38 PM | #13 |
Drives: 2010 CAMARO. 10.04@133mph, 1.4 60' Join Date: Jul 2009
Location: Lafayette, Louisiana
Posts: 4,585
|
feel free to call us here at Lethal Racing. we have a popular cam that makes about 480-490rwhp in the LS3 camaro with supporting mods that you have mentioned.
Nick |
12-30-2012, 03:41 PM | #14 |
Banned
Drives: 10' 2SS LS3 M6 Join Date: May 2012
Location: Phoenix,AZ
Posts: 1,370
|
|
|
|
|
|