FSP BUILD #1 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Birm · 01-09-2013, 04:48 PM

So first a HUGE thanks to Matt & Rodney at FSP for even making this possible.

You guys have seriously been awesome throughout this entire process, whether it be answering my texts at absurd hours or calling me and keeping me informed on the progress, you (both) have made this step in my build ALMOST painless (spending $$$ is always painful lol).

Enough cannot be said about the professionalism and experience the two of you bring to the table. I was informed every step of the way which for someone with there first F.I. car is huge!

Had it not been for your guy's experience I would still be driving around with a F.I'd time bomb (see: http://www.camaro5.com/forums/showth...=268246&page=2 POST # 39-wrong pushrod length installed during Cam install). Thanks to you I can enjoy my car as opposed to rebuilding my engine.

And lastly, I want to thank you guys for being so competitive (understatment) with the pricing of everything from the install to the additional parts I needed to make this happen. When all this started, I was on a very tight budget and wasnt sure if this was even realistic. Well Matt/Rodney made it so. Everything was fairly priced, sometimes even unfairly (in my benefit not theres).

The tune is spot on and put down some monsterous numbers even in this heat/humidity. So again, I thank you both very much!

I cannot wait till the next step

More to follow in the coming months from Birm and FSP.

-Chris

SC2150 · 01-09-2013, 06:20 PM

Not many better at tuning than Matt.

Be carefull with that beast now!!!

Matt @ FSP · 01-09-2013, 07:36 PM

LOL... Yes Birm is officially FSP Build #00000001 ... We had to leave a few placeholders there.

Thanks again Birm. Like I said before, customer service is a two-way street and you have been awesome to deal with. I do not mind answering questions anytime of the day or night. Nowadays with technology most of my client's and I rely on text messaging because everyone is quite busy during the day.

Birm · 01-09-2013, 09:29 PM

I want my own custom placard or decal to throw under the hood, kinda like SLP or Hennesy does...just sayin'

Ivan @ Southwest Speed · 01-09-2013, 11:06 PM

Like.

Ivan @ Southwest Speed

flyer08 · 01-10-2013, 07:34 PM

Can't wait to get mine in there as soon as my other parts arrive

Birm · 01-10-2013, 08:24 PM

Your SC or your CAM? Or both!? (*hint hint*) lol

flyer08 · 01-10-2013, 08:53 PM

Sc is out of the question. Cam took my entire modding budget

Matt @ FSP · 01-10-2013, 10:24 PM

Quote:

Originally Posted by flyer08

Sc is out of the question. Cam took my entire modding budget

Ah yes but you can always add some boost if you want down the line... That FTI verter and TSP cam obviously likes some boost

01-09-2013, 04:48 PM	#1
Birm Drives: Florida Speed & Power Join Date: Jan 2011 Location: Pinellas Park, FL Posts: 3,185	FSP BUILD #1 So first a HUGE thanks to Matt & Rodney at FSP for even making this possible. You guys have seriously been awesome throughout this entire process, whether it be answering my texts at absurd hours or calling me and keeping me informed on the progress, you (both) have made this step in my build ALMOST painless (spending $$$ is always painful lol). Enough cannot be said about the professionalism and experience the two of you bring to the table. I was informed every step of the way which for someone with there first F.I. car is huge! Had it not been for your guy's experience I would still be driving around with a F.I'd time bomb (see: http://www.camaro5.com/forums/showth...=268246&page=2 POST # 39-wrong pushrod length installed during Cam install). Thanks to you I can enjoy my car as opposed to rebuilding my engine. And lastly, I want to thank you guys for being so competitive (understatment) with the pricing of everything from the install to the additional parts I needed to make this happen. When all this started, I was on a very tight budget and wasnt sure if this was even realistic. Well Matt/Rodney made it so. Everything was fairly priced, sometimes even unfairly (in my benefit not theres). The tune is spot on and put down some monsterous numbers even in this heat/humidity. So again, I thank you both very much! I cannot wait till the next step More to follow in the coming months from Birm and FSP. -Chris

01-09-2013, 06:20 PM	#2
SC2150 Account Suspended Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009 Location: Bradenton, FL Posts: 6,063	Not many better at tuning than Matt. Be carefull with that beast now!!!

01-09-2013, 07:36 PM	#3
Matt @ FSP Drives: 2011 Camaro SS Join Date: Dec 2012 Location: Bradenton, FL Posts: 2,610	LOL... Yes Birm is officially FSP Build #00000001 ... We had to leave a few placeholders there. Thanks again Birm. Like I said before, customer service is a two-way street and you have been awesome to deal with. I do not mind answering questions anytime of the day or night. Nowadays with technology most of my client's and I rely on text messaging because everyone is quite busy during the day.

01-09-2013, 09:29 PM	#4
Birm Drives: Florida Speed & Power Join Date: Jan 2011 Location: Pinellas Park, FL Posts: 3,185	I want my own custom placard or decal to throw under the hood, kinda like SLP or Hennesy does...just sayin'

01-09-2013, 11:06 PM	#5
Ivan @ Southwest Speed Drives: '15 Z06, '01 NBM SS, '97 SS Join Date: May 2009 Location: Rio Rancho, NM Posts: 12,161	Like. Ivan @ Southwest Speed

01-10-2013, 07:34 PM	#6
flyer08 Account Suspended Drives: 2010 2SS/RS Join Date: Jun 2009 Location: Texas Posts: 3,418	Can't wait to get mine in there as soon as my other parts arrive

01-10-2013, 08:24 PM	#7
Birm Drives: Florida Speed & Power Join Date: Jan 2011 Location: Pinellas Park, FL Posts: 3,185	Your SC or your CAM? Or both!? (hint hint) lol

01-10-2013, 08:53 PM	#8
flyer08 Account Suspended Drives: 2010 2SS/RS Join Date: Jun 2009 Location: Texas Posts: 3,418	Sc is out of the question. Cam took my entire modding budget