Another happy Roto-Fab customer - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ZL1-V · 01-23-2013, 01:57 AM

Finally installed the unit this morning. Love the whine of the blower!

SamHouseIII · 01-23-2013, 09:53 AM

sounds great doesn't it!!

MTNdew · 01-23-2013, 10:52 AM

I just installed mine last week. Gotta love the sound and quality.

BlackinBlack · 01-30-2013, 05:46 PM

I noticed something on mine. A wiring loam is pinched between the radiator and the CAI shield. It is hard to see but here is a picture. Also it is between the AC line and the Shield. I am concerned that the wire will chafe through and short. Anyone else notice this?

Picture

Rainman1 · 01-30-2013, 05:53 PM

Quote:

Originally Posted by BlackinBlack

I noticed something on mine. A wiring loam is pinched between the radiator and the CAI shield. It is hard to see but here is a picture. Also it is between the AC line and the Shield. I am concerned that the wire will chafe through and short. Anyone else notice this?

Picture

I ran that loom higher alongside the AC line. You are right, chaffing would not be good. If its tight you may need to remove the CAI first rather than just tugging on the loom to get it in position.

Iroc-ZL1 · 01-30-2013, 05:58 PM

BlackinBlack · 01-31-2013, 08:26 AM

I fixed mine. I pulled on the heat shield and my wife worked the wire up. No damage.

Roto-Fab if you are lurking in this thread. You should update the instructions to include making sure this cable does not get pinched. I was careful with the ground due to instructions but this I just was not aware of. Not a big deal if noticed early but would be bad if left.

Love my Roto-Fab.

Roto-fab 1 · 02-19-2013, 12:06 PM

Quote:

Originally Posted by BlackinBlack

I fixed mine. I pulled on the heat shield and my wife worked the wire up. No damage.

Roto-Fab if you are lurking in this thread. You should update the instructions to include making sure this cable does not get pinched. I was careful with the ground due to instructions but this I just was not aware of. Not a big deal if noticed early but would be bad if left.

Love my Roto-Fab.

Thanks for the info and yes, we will address this in our instructions. We routed the loom higher in our car during testing just as you have yours now.

01-23-2013, 01:57 AM	#1
ZL1-V Drives: 2013 Camaro ZL1 Join Date: Dec 2012 Location: Dallas, Texas Posts: 2,154	Another happy Roto-Fab customer Finally installed the unit this morning. Love the whine of the blower!

01-23-2013, 09:53 AM	#2
SamHouseIII I Carry! Drives: 2013 CRT ZL1 Join Date: Jul 2011 Location: Fletcher, Ok Posts: 2,722	sounds great doesn't it!! __________________ I am a Modaholic!! Please Help!! Do Not feed my addicition....See build... http://www.camaro5.com/forums/showthread.php?t=261540 From Oklahoma, Join us on Facebook https://www.facebook.com/groups/okcamaros/

01-23-2013, 10:52 AM	#3
MTNdew Drives: 13 ZL1 #493-13 road glide Join Date: Oct 2010 Location: pittsburgh Posts: 111	I just installed mine last week. Gotta love the sound and quality. __________________ stainless works 2in headers: 20% tint: rotofab CAI: 18% ATI: ID850's: tuned by JRE

01-30-2013, 05:46 PM	#4
BlackinBlack Drives: 2016 Corvette Z06 Blade Silver Join Date: Jun 2009 Location: Florida Posts: 822	I noticed something on mine. A wiring loam is pinched between the radiator and the CAI shield. It is hard to see but here is a picture. Also it is between the AC line and the Shield. I am concerned that the wire will chafe through and short. Anyone else notice this? Picture Attached Images __________________ 2016 2LZ Z06 Blade Silver 2013 ZL1 BLACK on BLACK <SOLD> Roto-Fab CAI 2010 2SS/RS BLACK on BLACK <SOLD> 3" MBRP 304 Stainless Exhaust Roto-Fab CAI

01-31-2013, 08:26 AM	#7
BlackinBlack Drives: 2016 Corvette Z06 Blade Silver Join Date: Jun 2009 Location: Florida Posts: 822	I fixed mine. I pulled on the heat shield and my wife worked the wire up. No damage. Roto-Fab if you are lurking in this thread. You should update the instructions to include making sure this cable does not get pinched. I was careful with the ground due to instructions but this I just was not aware of. Not a big deal if noticed early but would be bad if left. Love my Roto-Fab. __________________ 2016 2LZ Z06 Blade Silver 2013 ZL1 BLACK on BLACK <SOLD> Roto-Fab CAI 2010 2SS/RS BLACK on BLACK <SOLD> 3" MBRP 304 Stainless Exhaust Roto-Fab CAI

01-30-2013, 05:58 PM	#6
Iroc-ZL1 Drives: 2013 ZL1 #505 Join Date: Nov 2012 Location: South Gate CA Posts: 144