Katech LS9X clutch for camaro - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Posidon42 · 01-27-2013, 10:20 AM

I bought this to use with my G8 conversion but it doesn't fit. The input shaft on the camaro is about an inch longer than the G8s and that's about how much clearance I am missing. Comes with the aluminum flywheel with steel insert and a set of clutches that look to be in very good shape. Also comes with a Tick Performance speed bleeder.

Just looking to cover the cost of the replacement clutch I just ordered. This is the LS9X kit if you look at their website here: http://store.katechengines.com/ls9x-...maro-p220.aspx. $900 shipped to conus.

Posidon42 · 01-27-2013, 09:32 PM

Pics as promised.

was619 · 01-28-2013, 12:22 PM

Is the clutch plate used?
You said they look to be in good condition so it's a little unclear.
Thanks

Posidon42 · 01-28-2013, 09:30 PM

Yes the previous owner used them for a couple hundred miles before swapping the trans out for an automatic. Looking for a quick sale so PM me with offers.

Posidon42 · 01-30-2013, 08:18 AM

Bump. $900 shipped. Need this gone.

Posidon42 · 01-31-2013, 10:49 AM

Bump

2SSRS@Gen5diy · 01-31-2013, 11:42 AM

This kit #is for the C6 Corvette is it not?

Posidon42 · 02-01-2013, 08:38 AM

Not sure how to verify but this was installed in a camaro previously. If you look at the katech site it shows that it is an adaptation on the ZR1 clutch to the camaro.

Posidon42 · 02-04-2013, 01:38 PM

Bump

Posidon42 · 02-14-2013, 11:12 PM

To the top

Posidon42 · 02-20-2013, 09:00 AM

Still here.

Posidon42 · 03-18-2013, 09:32 AM

Bump.

manbag83 · 03-20-2013, 03:13 AM

Very nice!

Posidon42 · 02-25-2014, 09:49 PM

Back from my deployment and I need to clear some stuff out of the garage. This needs a new home. Asking $900 shipped, this is $1450 new people!! Loads of life left in this thing. Added product link in original post.

01-27-2013, 10:20 AM	#1
Posidon42 Drives: 08 G8 GT Join Date: Nov 2011 Location: Colorado Springs Posts: 111	Katech LS9X clutch for camaro I bought this to use with my G8 conversion but it doesn't fit. The input shaft on the camaro is about an inch longer than the G8s and that's about how much clearance I am missing. Comes with the aluminum flywheel with steel insert and a set of clutches that look to be in very good shape. Also comes with a Tick Performance speed bleeder. Just looking to cover the cost of the replacement clutch I just ordered. This is the LS9X kit if you look at their website here: http://store.katechengines.com/ls9x-...maro-p220.aspx. $900 shipped to conus. Last edited by Posidon42; 02-25-2014 at 09:51 PM.

01-28-2013, 12:22 PM	#3
was619 Billy The Kid Drives: Cyber Grey 2SS/RS Join Date: Jun 2009 Location: North Alabama Posts: 637	Is the clutch plate used? You said they look to be in good condition so it's a little unclear. Thanks __________________ CGM 2SS/RS[SIZE="1"] Performance: LT Headers/Stainless Works cat-back, 225/233 Cam, 1LE 3.91 gears, Custom Tune, BMR suspension, MGW Shifter, Stainless brake & clutch lines, Ideal G Master Cylinder, 275s on all 4 corners Aesthetics: ZL1 Spoiler, DIY LED marker lights, AACPlasma DRL, Yellow Calipers, painted factory wheels

03-20-2013, 03:13 AM	#13
manbag83 Drives: 2011 Camaro 2SSRS YUDLOSE Join Date: Mar 2012 Location: San Antonio, TX Posts: 117 View My Garage	Very nice! __________________ ^777RWHP/680TQ^

01-27-2013, 09:32 PM	#2
Posidon42 Drives: 08 G8 GT Join Date: Nov 2011 Location: Colorado Springs Posts: 111	Pics as promised.

01-28-2013, 09:30 PM	#4
Posidon42 Drives: 08 G8 GT Join Date: Nov 2011 Location: Colorado Springs Posts: 111	Yes the previous owner used them for a couple hundred miles before swapping the trans out for an automatic. Looking for a quick sale so PM me with offers.

01-30-2013, 08:18 AM	#5
Posidon42 Drives: 08 G8 GT Join Date: Nov 2011 Location: Colorado Springs Posts: 111	Bump. $900 shipped. Need this gone.

01-31-2013, 10:49 AM	#6
Posidon42 Drives: 08 G8 GT Join Date: Nov 2011 Location: Colorado Springs Posts: 111	Bump

01-31-2013, 11:42 AM	#7
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	This kit #is for the C6 Corvette is it not?

02-01-2013, 08:38 AM	#8
Posidon42 Drives: 08 G8 GT Join Date: Nov 2011 Location: Colorado Springs Posts: 111	Not sure how to verify but this was installed in a camaro previously. If you look at the katech site it shows that it is an adaptation on the ZR1 clutch to the camaro.

02-04-2013, 01:38 PM	#9
Posidon42 Drives: 08 G8 GT Join Date: Nov 2011 Location: Colorado Springs Posts: 111	Bump

02-14-2013, 11:12 PM	#10
Posidon42 Drives: 08 G8 GT Join Date: Nov 2011 Location: Colorado Springs Posts: 111	To the top

02-20-2013, 09:00 AM	#11
Posidon42 Drives: 08 G8 GT Join Date: Nov 2011 Location: Colorado Springs Posts: 111	Still here.

03-18-2013, 09:32 AM	#12
Posidon42 Drives: 08 G8 GT Join Date: Nov 2011 Location: Colorado Springs Posts: 111	Bump.

02-25-2014, 09:49 PM	#14
Posidon42 Drives: 08 G8 GT Join Date: Nov 2011 Location: Colorado Springs Posts: 111	Back from my deployment and I need to clear some stuff out of the garage. This needs a new home. Asking $900 shipped, this is $1450 new people!! Loads of life left in this thing. Added product link in original post.