Remote for Motorized plate holder - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

destroyer4 · 06-17-2009, 11:11 PM

Does anyone know if the remote for the swift motorsports motorized license plate mount can be linked to the garage door/home link buttons? Do you think it can learn it?

OUR72GTO · 06-17-2009, 11:17 PM

Heck of an Idea.!

shevyman · 06-18-2009, 09:32 AM

ok we sell those and no. it wont connect with your house or garage remote. i bet it could be done if you try to match the fregeuncies. i could find out more but i have it on my car and its like a car alarm but one button is for up and one down. but let me ask for you.

kdoske · 06-18-2009, 01:37 PM

just connect an accessory power line that comes on when the car is started to the contacts for the buttons on the remote control through something like this. Its a pulse relay, basically when it gets a High or low signal on the input line it outputs a high pulse on the output line for a predetermined amount of time by you.

http://www.drdetailshop.com/528T.htm

It would require some playing around with and probably some transistors here and there becuase I think this one is for 12volts only and im pretty sure your remote is going to be like 3.3v or something. It would work but would require some electrical knowledge but basically your plate would come out when the car was started and would close when the car was off.

Honestly im not sure why this isn't the way the motorized plates where made in the first place. It would be cheaper to manufacture and everything because you wouldn't even need the radio transmitters and what not.

p.s. this is all assuming that there is one button to open and another to close. if its a toggle switch then your screwed because would need a sensing marker to know when the plate was infact open and closed and that would be a lot more complicated.

06-17-2009, 11:11 PM	#1
destroyer4 Drives: 2010 Camaro SS, 2006 PT Conv. Join Date: Oct 2008 Location: Baldwin NY Posts: 351	Remote for Motorized plate holder Does anyone know if the remote for the swift motorsports motorized license plate mount can be linked to the garage door/home link buttons? Do you think it can learn it? __________________ Cyber Gray/Black/Black Stripes,2SS/RS,Auto 1100, Preliminary order accepted 10/16/09 3800, Order produced 6/22 Vin:2G1FK1EJ9A9120942 6000, Delivered to the customer 7/7/09

06-17-2009, 11:17 PM	#2
OUR72GTO 2010 SIM Beige RS 6M Drives: SIM RS 6M 66 Corvair Silverado LTZ Join Date: Oct 2008 Location: Kamloops,British Columbia Posts: 4,673	Heck of an Idea.! __________________ CAMARO.. 2010 The Heart Beat is back in CHEVROLET Now let's put it back in America

06-18-2009, 01:37 PM	#4
kdoske Waiting For My 1SS/RS SIM Drives: Sold My Lancer, now carless :/ Join Date: Apr 2009 Location: louisiana Posts: 950	just connect an accessory power line that comes on when the car is started to the contacts for the buttons on the remote control through something like this. Its a pulse relay, basically when it gets a High or low signal on the input line it outputs a high pulse on the output line for a predetermined amount of time by you. http://www.drdetailshop.com/528T.htm It would require some playing around with and probably some transistors here and there becuase I think this one is for 12volts only and im pretty sure your remote is going to be like 3.3v or something. It would work but would require some electrical knowledge but basically your plate would come out when the car was started and would close when the car was off. Honestly im not sure why this isn't the way the motorized plates where made in the first place. It would be cheaper to manufacture and everything because you wouldn't even need the radio transmitters and what not. p.s. this is all assuming that there is one button to open and another to close. if its a toggle switch then your screwed because would need a sensing marker to know when the plate was infact open and closed and that would be a lot more complicated. __________________ Order# NJPW8K 1SS/RS SIM Black Interior 1100 (original order date): 04/16/09 2000 (dealer received allocation): 2500 (order preferenced): 3000 (accepted to production): 3300 (scheduled for prod): 3400 (broadcast): 3800 (produced): 4000/4B00 (available to ship/bayed): 4200 (shipped): 4300 (intermediate, may be multiple):

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Remote Start on Manual Transmission	Dentyneice	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	51	02-11-2015 02:56 PM
When to order personalized plate?	jpsuperman81	5th Gen Camaro SS LS LT General Discussions	15	06-18-2009 01:55 PM
Retractable License Front Plate Holder	formulahawk	Cosmetics and Lighting Modification Discussions	3	06-12-2009 07:30 AM
Is the license plate holder screwed right onto the body of the car?	CamaroEnergy4Life	5th Gen Camaro SS LS LT General Discussions	31	03-19-2009 11:42 PM
Can we get a front plate holder that bends with the bumper?	edog	Cosmetics and Lighting Modification Discussions	45	02-25-2009 12:36 PM

06-18-2009, 09:32 AM	#3
shevyman Drives: 2010 Camaro SS IOM Join Date: Feb 2009 Location: california Posts: 1,734 View My Garage	ok we sell those and no. it wont connect with your house or garage remote. i bet it could be done if you try to match the fregeuncies. i could find out more but i have it on my car and its like a car alarm but one button is for up and one down. but let me ask for you.