Modifying ZL1 LCA's - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Trackman · 05-14-2013, 12:19 AM

I am looking for information on modifying my lower control arms on my ZL1 to fit 17" Weld wheels. Any suggestions, pics of modded lca or thread links would be greatly appreciated.

Trackman · 05-19-2013, 09:15 PM

Anyone?

Moreno1 · 05-19-2013, 10:03 PM

Here is a very informational post on the LCA's that Pfadt made on Nathan's "Project cleaning the clutter in the engine bay" thread.

Post 1884

hope this helps.

camaro-21 · 05-19-2013, 10:46 PM

bmr makes some lower control arms and hubs that will probably work

05-14-2013, 12:19 AM	#1
Trackman Drives: 67RS Camaro ,Black 2013 ZL1 Join Date: Jun 2010 Location: Alberta Posts: 1,409	Modifying ZL1 LCA's I am looking for information on modifying my lower control arms on my ZL1 to fit 17" Weld wheels. Any suggestions, pics of modded lca or thread links would be greatly appreciated.

05-19-2013, 10:46 PM	#4
camaro-21 Drives: 2011 cyber grey metallic camaro v6 Join Date: Jun 2011 Location: hampton va Posts: 219	bmr makes some lower control arms and hubs that will probably work __________________ 2011 camaro v6- sts turbo w/ meth injection, barton short throw, spec stage 3+ clutch, forgestar f-14 rims, Nitto invo tires, pfadt sway bars drop springs and end links, rx catch can, goodridge stainless steel brake lines, aac halos afterburner taillights and sidemarkers, sebon carbon rear diffuser.

05-19-2013, 09:15 PM	#2
Trackman Drives: 67RS Camaro ,Black 2013 ZL1 Join Date: Jun 2010 Location: Alberta Posts: 1,409	Anyone?

05-19-2013, 10:03 PM	#3
Moreno1 Drives: G5.R Join Date: Sep 2010 Location: SoCal Posts: 2,377	Here is a very informational post on the LCA's that Pfadt made on Nathan's "Project cleaning the clutter in the engine bay" thread. Post 1884 hope this helps.