Northstar T & T - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

rforbes · 05-20-2013, 10:00 AM

Test & Tune This Saturday, 5/25 from 1:00 until dusk if anyone would like to join me.

sasquash1984 · 05-20-2013, 10:26 AM

working

rich3fan · 05-20-2013, 11:50 AM

I just mapped Northstar from my house and it's an hour drive.

No love for Redline Raceway? Maybe I'm not looking hard enough, but I don't seem to see much talk about that track.

(Sorry for the threadjack rforbes)

rforbes · 05-20-2013, 12:31 PM

Quote:

Originally Posted by ItsBroke

I just mapped Northstar from my house and it's an hour drive.

No love for Redline Raceway? Maybe I'm not looking hard enough, but I don't seem to see much talk about that track.

(Sorry for the threadjack rforbes)

I go to Northstar because it is closer to me and I like the track better. Nothing against Redline. I have been there a couple of times. It looks like they are having index racing this Saturday with T & T mixed in which means you never know when you will get to run. Northstar has all day dedicated to test and tune this Saturday. I would be willing to go to Redline sometime if there was enough interest.

rforbes · 05-20-2013, 01:25 PM

Looks like the times have changed which is fine with me since it will be cooler.
Gates open at 4, racing 6-11
Squash, you can make it now. No excuses.

sasquash1984 · 05-20-2013, 05:39 PM

Quote:

Originally Posted by rforbes

Looks like the times have changed which is fine with me since it will be cooler.
Gates open at 4, racing 6-11
Squash, you can make it now. No excuses.

doh

rforbes · 06-05-2013, 12:45 PM

Ok, I am going to try this again. Right now it says on North Stars schedule that Sunday is Test & Tune only AND....There is virtually no chance of rain. Therefore I intend to go out Sunday about 1:00 for a few runs if anyone would like to join.
"As Long as the weather holds up"

sasquash1984 · 06-05-2013, 02:09 PM

I might go.....

sasquash1984 · 06-07-2013, 03:26 PM

Nobody else wants to go.....I'll be there at 1

NorthTex45thSS · 06-08-2013, 07:34 AM

That sounds good to me I'll join y'all up there!

rforbes · 06-08-2013, 08:12 AM

Here is hoping Mother Nature does not screw it up for us again.

sasquash1984 · 06-08-2013, 08:59 AM

88 for the high to tomorrow

sasquash1984 · 06-09-2013, 09:59 AM

rick why did u have to mention rain

rforbes · 06-09-2013, 10:07 AM

It is all moving to the east now. should be good in a few hours. I still plan on being there about 1

05-20-2013, 10:00 AM	#1
rforbes Drives: IOM SS/RS Join Date: Mar 2009 Location: The Colony, Texas Posts: 797 View My Garage	Northstar T & T Test & Tune This Saturday, 5/25 from 1:00 until dusk if anyone would like to join me.

05-20-2013, 10:26 AM	#2
sasquash1984 502 RWHP N/A Drives: The yeti Join Date: May 2009 Location: Saginaw/ Ft Worth TX Posts: 3,085 View My Garage	working __________________ factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's

06-05-2013, 12:45 PM	#7
rforbes Drives: IOM SS/RS Join Date: Mar 2009 Location: The Colony, Texas Posts: 797 View My Garage	Test & Tune Ok, I am going to try this again. Right now it says on North Stars schedule that Sunday is Test & Tune only AND....There is virtually no chance of rain. Therefore I intend to go out Sunday about 1:00 for a few runs if anyone would like to join. "As Long as the weather holds up"

06-05-2013, 02:09 PM	#8
sasquash1984 502 RWHP N/A Drives: The yeti Join Date: May 2009 Location: Saginaw/ Ft Worth TX Posts: 3,085 View My Garage	I might go..... __________________ factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's

06-07-2013, 03:26 PM	#9
sasquash1984 502 RWHP N/A Drives: The yeti Join Date: May 2009 Location: Saginaw/ Ft Worth TX Posts: 3,085 View My Garage	Nobody else wants to go.....I'll be there at 1 __________________ factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's

05-20-2013, 11:50 AM	#3
rich3fan What's this button do? Drives: 2019 Black 2SS Join Date: Apr 2013 Location: Wylie, Texas Posts: 1,364	I just mapped Northstar from my house and it's an hour drive. No love for Redline Raceway? Maybe I'm not looking hard enough, but I don't seem to see much talk about that track. (Sorry for the threadjack rforbes)

05-20-2013, 01:25 PM	#5
rforbes Drives: IOM SS/RS Join Date: Mar 2009 Location: The Colony, Texas Posts: 797 View My Garage	Looks like the times have changed which is fine with me since it will be cooler. Gates open at 4, racing 6-11 Squash, you can make it now. No excuses.

06-08-2013, 07:34 AM	#10
NorthTex45thSS Drives: 2012 45th SS Join Date: Jul 2012 Location: DFW, Tx Posts: 144 View My Garage	That sounds good to me I'll join y'all up there! __________________ 2012 45th RS/SS ADM Perfomance intake, ADM tuned, Stainless Works headers/no cats, 3" magnaflow comp exhaust, 160º thermostat, Nitto NT05R's, 387rwhp/396tq 95 Kenworth W900L powered by CAT 13 spd

06-08-2013, 08:12 AM	#11
rforbes Drives: IOM SS/RS Join Date: Mar 2009 Location: The Colony, Texas Posts: 797 View My Garage	Northstar Here is hoping Mother Nature does not screw it up for us again.

06-08-2013, 08:59 AM	#12
sasquash1984 502 RWHP N/A Drives: The yeti Join Date: May 2009 Location: Saginaw/ Ft Worth TX Posts: 3,085 View My Garage	88 for the high to tomorrow __________________ factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's

06-09-2013, 09:59 AM	#13
sasquash1984 502 RWHP N/A Drives: The yeti Join Date: May 2009 Location: Saginaw/ Ft Worth TX Posts: 3,085 View My Garage	rick why did u have to mention rain __________________ factory motor factory trans, Gpi ss4 cam stock heads ported and milled, full exhaust, circle d 5c 4000 triple disk, 3:91 rear end with posi mod, cai, bmr derlin rear diff bushins, bmr derlin cradle bushins, bmr trailing arms, toe rods with bushings, and bmr anti extreme sway bar. Weld rt-s 17x5 fronts and 17X10 rears on mickey thompson et street r's

06-09-2013, 10:07 AM	#14
rforbes Drives: IOM SS/RS Join Date: Mar 2009 Location: The Colony, Texas Posts: 797 View My Garage	It is all moving to the east now. should be good in a few hours. I still plan on being there about 1