CCW Progress - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BOBSS · 07-11-2009, 12:45 AM

Thanks John, for sending these to me.

-note: this is a work in progress, still waiting for pictures of the final combinations.

"had a 2010 ss in here today to do some fitment work
http://www.ccwheel.com/misc/new%20camaro%20ss/
some are pics of 20x11 (polished 505a) and then a custom 20x11.5 (brushed sp16 with 3" lip and 2mm caliper clearence)
using the 315 35 20 nitto invo (little too big, the 305 35's will be better)
also shown are 19x11 pics with 315 40 19 hoosier r6's (raw sp550 and 505a)
as well as 18x11 with the 305 35 18 m/t radial (tire was too short but i didn't have a mh 28" tall 325 40 18 in stock to do it right)
a 17x10 is doable to run a 28x10x17 hoosier bias slick, but i dont have the proper component to build it right now
this is just some preliminary stuff
i expect to settle on a 20x11.5 rear and 20x10 front with a 305 rear and 275 front tire
john"

Name: 505a_1_hoosier R6.jpg
Views: 5167
Size: 330.1 KB

Name: 505a_1_hoosier R6.jpg
Views: 5167
Size: 330.1 KB

Name: 505a_2_hoosier R6.jpg
Views: 4028
Size: 306.9 KB

Name: 550_1_hoosier R6.jpg
Views: 4765
Size: 325.5 KB

Name: c10_1.jpg
Views: 4431
Size: 299.5 KB

Name: c10_2.jpg
Views: 4174
Size: 294.7 KB

Name: c10_3.jpg
Views: 4041
Size: 338.2 KB

Name: sp16_1 nitto invo.jpg
Views: 8503
Size: 303.0 KB

Name: sp16_2.jpg
Views: 4132
Size: 327.4 KB

Name: sp16_3.jpg
Views: 3823
Size: 288.3 KB

Name: sp16_4.jpg
Views: 4345
Size: 336.9 KB

I love that M/T tire!

CamaroDreams07 · 07-11-2009, 01:37 AM

So frustrating..only taking pics that show NOTHING...you need to see the whole car with the rim in order to get the effect.

ZZcamaro · 07-11-2009, 01:54 AM

seems like some of those are sticking out a little more than I would like. I would like to avoid having the tire throw crap all ove rthe car. I want a smuch tire as I can get while still staying inside the fenders! That is the fitment I am looking for.

Kyle2k · 07-11-2009, 02:09 AM

Nice to see that there will be some small wheels that can fit for racing applications

novajess1972 · 07-11-2009, 12:22 PM

Yeah, it seems like all the wheels that are being made stick out too far. I'm beginning to think that I will just stick with the OE wheels and powdercoat them.

2SSRS@Gen5diy · 07-11-2009, 02:24 PM

Quote:

Originally Posted by ZZcamaro

seems like some of those are sticking out a little more than I would like. I would like to avoid having the tire throw crap all ove rthe car. I want a smuch tire as I can get while still staying inside the fenders! That is the fitment I am looking for.

+1 what do you think is going to happen if we start lowering the cars?, This has to stay in side the fender not out side.

Indpowr · 07-11-2009, 02:29 PM

CCW makes a great wheel even more for there price point. I have had 3 sets and been happy with each. The only problem is keeping them clean and polished.

stovt001 · 07-11-2009, 04:08 PM

What are the weights vs stock rims? I like the looks so far.

Crowley · 07-11-2009, 04:12 PM

Quote:

Originally Posted by novajess1972

Yeah, it seems like all the wheels that are being made stick out too far. I'm beginning to think that I will just stick with the OE wheels and powdercoat them.

It just seems the offset isn't correct or something. BTW in another thread on the HPE600 car that just got built, that looks to be the correct offset on those wheels ..

Crowley

LSxJunkie · 07-12-2009, 03:08 AM

Oh look, classy wheels.

TaylorRyanSS · 07-12-2009, 03:36 AM

Too small

vsgls1 · 07-12-2009, 11:21 AM

Once they are done with the R&D with the wheels, I am sure there will be nice pics.

novajess1972 · 07-13-2009, 11:03 PM

Quote:

Originally Posted by Indpowr

CCW makes a great wheel even more for there price point. I have had 3 sets and been happy with each. The only problem is keeping them clean and polished.

Had one set....but I second the part about keeping them clean! Damn, they were a biotch! But well worth the effort...

6liter · 07-15-2009, 10:47 PM

Here are some more pics I took for the fitment checks

07-11-2009, 12:45 AM	#1
BOBSS Outlaw Drives: 2010SS Join Date: Jan 2009 Location: Mooresville NC Posts: 299	CCW Progress Thanks John, for sending these to me. -note: this is a work in progress, still waiting for pictures of the final combinations. "had a 2010 ss in here today to do some fitment work http://www.ccwheel.com/misc/new%20camaro%20ss/ some are pics of 20x11 (polished 505a) and then a custom 20x11.5 (brushed sp16 with 3" lip and 2mm caliper clearence) using the 315 35 20 nitto invo (little too big, the 305 35's will be better) also shown are 19x11 pics with 315 40 19 hoosier r6's (raw sp550 and 505a) as well as 18x11 with the 305 35 18 m/t radial (tire was too short but i didn't have a mh 28" tall 325 40 18 in stock to do it right) a 17x10 is doable to run a 28x10x17 hoosier bias slick, but i dont have the proper component to build it right now this is just some preliminary stuff i expect to settle on a 20x11.5 rear and 20x10 front with a 305 rear and 275 front tire john" I love that M/T tire! Last edited by BOBSS; 10-18-2009 at 09:53 AM.

07-11-2009, 02:09 AM	#4
Kyle2k LVL 50 Troll Stomper Drives: 2010 Camaro Join Date: Feb 2008 Location: Indianapolis Posts: 3,463	Nice to see that there will be some small wheels that can fit for racing applications __________________

07-11-2009, 12:22 PM	#5
novajess1972 I Done Caught Diabeetus. Drives: 1972 Chevelle SS/2010 Tundra Join Date: May 2009 Location: Houston/Humble Posts: 591	Yeah, it seems like all the wheels that are being made stick out too far. I'm beginning to think that I will just stick with the OE wheels and powdercoat them. __________________ CANCELLED ORDER: 1SS/CGM/MN6/BLACK RALLY STRIPES

07-11-2009, 04:08 PM	#8
stovt001 Drives: 2006 Cobalt, 2004 Taurus wagon Join Date: Oct 2007 Location: California Posts: 3,810	What are the weights vs stock rims? I like the looks so far. __________________ "It's kind of fun to do the impossible" - Walt Disney There's a great big beautiful tomorrow shining at the end of every day There's a great big beautiful tomorrow Just a dream away

07-12-2009, 03:08 AM	#10
LSxJunkie Snark snark snark Drives: RX350 Join Date: Sep 2008 Location: 3L Hell Posts: 555	Oh look, classy wheels. __________________ What is this, CorvetteForum Lite?

07-11-2009, 01:37 AM	#2
CamaroDreams07 Drives: Slow V6 Join Date: Jun 2009 Location: East Lansing, MI Posts: 9,361 View My Garage	So frustrating..only taking pics that show NOTHING...you need to see the whole car with the rim in order to get the effect.

07-11-2009, 01:54 AM	#3
ZZcamaro Drives: 2SS w/ ZZ427 Package!! Join Date: Oct 2008 Location: Pittsburgh, PA Posts: 2,699	seems like some of those are sticking out a little more than I would like. I would like to avoid having the tire throw crap all ove rthe car. I want a smuch tire as I can get while still staying inside the fenders! That is the fitment I am looking for.

07-11-2009, 02:29 PM	#7
Indpowr Account Suspended Drives: Corvette C6 Join Date: May 2008 Location: Florida Posts: 6,959 View My Garage	CCW makes a great wheel even more for there price point. I have had 3 sets and been happy with each. The only problem is keeping them clean and polished.

07-12-2009, 03:36 AM	#11
TaylorRyanSS COTW: 12/13/10 Drives: 1969 Camaro Join Date: Feb 2008 Location: Orange County, CA Posts: 7,880	Too small __________________ "Are you one of those boys who prefer cars to women? - I'm one of those boys that appreciates a fine body, regardless of the make." 1969 CAMARO JOURNAL: http://www.camaro5.com/forums/showthread.php?t=341239 \| FACEBOOK: http://www.facebook.com/taylor.ryan.apt \| GRAPHIC DESIGN: www.aptdesigns.net

07-12-2009, 11:21 AM	#12
vsgls1 Drives: 07 GMC Sierra Join Date: Oct 2008 Location: Palm Bay, FL Posts: 421	Once they are done with the R&D with the wheels, I am sure there will be nice pics. __________________ Keith 2SS/RS MN6 in CGM. Delivered 6/22/09. Blown 7/29/09. Sold 12/6/10. 07 GMC Sierra

07-15-2009, 10:47 PM	#14
6liter Drives: BLK Join Date: Jul 2009 Location: USA Posts: 913 View My Garage	Here are some more pics I took for the fitment checks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OMG - MY BRAND NEW CAR TORN APART! (SEMA Project Progress)	Indpowr	Camaro Photos \| Spyshots \| Video \| Media Gallery	208	05-13-2010 04:48 PM
DSVcustoms Hi-Res progress photos of our SEMA car (new parts)	Indpowr	Cosmetics and Lighting Modification Discussions	59	07-13-2009 08:50 PM
3500 & Moving Right Along-Good Progress	ravensjeff	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	2	04-20-2009 05:53 PM
Fbodfather - Scott Settlemire Talks About Camaro Progress On Corvette Forum	camaro5	5th Gen Camaro SS LS LT General Discussions	7	12-07-2008 07:35 PM