09-17-2013, 05:25 PM | #1 |
Drives: Black 2011 Camaro LS Join Date: Feb 2011
Location: Texas
Posts: 1,694
|
2000 LS1 Chevy S10
Posting this for a friend of mine. He did not build this truck and has owned it for 6 months. This is, to the best of his knowledge, what is known of the truck.
UPDATE: NEW ENGINEERED COOLING PRODUCTS RADIATOR AND NEW WATER PUMP $5,000. 2000 Chevy S10 LS1 Willing to trade the truck plus cash for a late model GTO. LS1 out of a 2001 Trans am Performance Products intake manifold Comp Cams custom grind cam- 228/228 588/588 112 LSA Comp hardened push rods Ported and polished oil pump LS2 HD timing chain ARP rod bolts ARP head bolts Patriot .650 lift springs Performance Products intake and fuel rails. 4L60e that was just rebuilt a little less than a year ago with shift kit New CPW wiring harness New computer and radiator. Engine has about 90k miles. New tires (235s on the front, 295s on the rear) NOT PICTURED 3.42 gear rear end New disk brakes on the rear New Cowl Hood New thermostat Comes with 4.10 rear end (changed to the 3.42 for street use less than 6 months ago) AC that needs to be installed. New heater Core (now installed for the new owner!)
__________________
White Fender Hashes from Big Worm Graphix with Custom White Bowties
GM Factory Remote Start and Factory Key Fob SS Fascia, Factory RS HIDs, Plasma P13W fog lights Non-RS to RS and fog light harness by Gen5DIY LED Interior, Trunk, and Licence Plate lights in white ZL1 Spoiler with Gen5DIY harness Factory NPP cat back Blacked out tail light bezels Factory 20 inch wheels wrapped in Nitto Motivos Lowered 1.25inch on Eibach Pro springs Last edited by My Caroline; 04-10-2014 at 09:53 AM. |
09-19-2013, 02:08 PM | #2 |
Smoke'm if you can
Drives: 2010 Camaro 2SS/RS/LS3/M6 Join Date: Nov 2012
Location: Reno, NV
Posts: 713
|
Guess your buddy is selling his truck
__________________
Texas Speed LT Headers with HF Cats, Borla ATAK Exhaust, MGW Short Throw Shifter, ADM CAI with Scoop, Elite Oil Catch Can, Mishimoto Aluminum Radiator, Pedders XA Coilovers, Mantic Twin 9000 Clutch, PFADT Solid Subframe Bushings, PFADT Front & Rear Sways, PFADT Upper Control Arm Bushing, PFADT Trailing Arms/Tie Rods, Whiteline Adjustable End Links, Whiteline Adjustable Lower Control Arms, Pedders Diff Bushings, Line Lock, ACC Side Markers, ACC Reverse Lights, Custom Tune from Nitrous Express.
|
09-19-2013, 04:47 PM | #3 |
Drives: Black 2011 Camaro LS Join Date: Feb 2011
Location: Texas
Posts: 1,694
|
Yup, trying to get rid of it and his car for a sports car.
__________________
White Fender Hashes from Big Worm Graphix with Custom White Bowties
GM Factory Remote Start and Factory Key Fob SS Fascia, Factory RS HIDs, Plasma P13W fog lights Non-RS to RS and fog light harness by Gen5DIY LED Interior, Trunk, and Licence Plate lights in white ZL1 Spoiler with Gen5DIY harness Factory NPP cat back Blacked out tail light bezels Factory 20 inch wheels wrapped in Nitto Motivos Lowered 1.25inch on Eibach Pro springs |
09-19-2013, 04:47 PM | #4 |
Drives: 2011 Camaro 2SS/RS (Black) L99 Join Date: Aug 2010
Location: Pilot Point, Texas
Posts: 2,185
|
Bump for a great deal!! GLWS
|
11-26-2013, 08:31 PM | #5 |
Drives: 2010 Camaro SS RS 6 speed Join Date: Sep 2013
Location: Maine
Posts: 292
|
Im gonna help you out bud why it's not selling.
ITS A OLD S10!!!!! Your asking $6500 for a S10 thats worth maybe a$1000 bucks stock $6500 can get you a ss camaro with a ls1. Truth is your asking way way way to much. Hope this helps. |
04-09-2014, 08:55 PM | #6 |
Drives: Black 2011 Camaro LS Join Date: Feb 2011
Location: Texas
Posts: 1,694
|
Bump
__________________
White Fender Hashes from Big Worm Graphix with Custom White Bowties
GM Factory Remote Start and Factory Key Fob SS Fascia, Factory RS HIDs, Plasma P13W fog lights Non-RS to RS and fog light harness by Gen5DIY LED Interior, Trunk, and Licence Plate lights in white ZL1 Spoiler with Gen5DIY harness Factory NPP cat back Blacked out tail light bezels Factory 20 inch wheels wrapped in Nitto Motivos Lowered 1.25inch on Eibach Pro springs |
04-10-2014, 10:21 AM | #7 |
Drives: Black 2011 Camaro LS Join Date: Feb 2011
Location: Texas
Posts: 1,694
|
Bump Would make a good daily driver.
__________________
White Fender Hashes from Big Worm Graphix with Custom White Bowties
GM Factory Remote Start and Factory Key Fob SS Fascia, Factory RS HIDs, Plasma P13W fog lights Non-RS to RS and fog light harness by Gen5DIY LED Interior, Trunk, and Licence Plate lights in white ZL1 Spoiler with Gen5DIY harness Factory NPP cat back Blacked out tail light bezels Factory 20 inch wheels wrapped in Nitto Motivos Lowered 1.25inch on Eibach Pro springs |
04-22-2014, 01:19 AM | #8 |
Drives: Black 2011 Camaro LS Join Date: Feb 2011
Location: Texas
Posts: 1,694
|
Bump
__________________
White Fender Hashes from Big Worm Graphix with Custom White Bowties
GM Factory Remote Start and Factory Key Fob SS Fascia, Factory RS HIDs, Plasma P13W fog lights Non-RS to RS and fog light harness by Gen5DIY LED Interior, Trunk, and Licence Plate lights in white ZL1 Spoiler with Gen5DIY harness Factory NPP cat back Blacked out tail light bezels Factory 20 inch wheels wrapped in Nitto Motivos Lowered 1.25inch on Eibach Pro springs |
04-22-2014, 08:37 AM | #9 |
Drives: 2011 2SS Join Date: Jan 2013
Location: DFW, TX
Posts: 931
|
I wish I had $5,000 to spare! I'd be all over this. Hope you sell it.
|
05-01-2014, 11:55 AM | #10 |
Drives: Black 2011 Camaro LS Join Date: Feb 2011
Location: Texas
Posts: 1,694
|
Let me know if you are ever interested. Had trouble selling this thing, but it just got a new VERY nice aluminum radiator made by Engineered Cooling Products, and its running better than ever!
__________________
White Fender Hashes from Big Worm Graphix with Custom White Bowties
GM Factory Remote Start and Factory Key Fob SS Fascia, Factory RS HIDs, Plasma P13W fog lights Non-RS to RS and fog light harness by Gen5DIY LED Interior, Trunk, and Licence Plate lights in white ZL1 Spoiler with Gen5DIY harness Factory NPP cat back Blacked out tail light bezels Factory 20 inch wheels wrapped in Nitto Motivos Lowered 1.25inch on Eibach Pro springs |
07-11-2014, 10:22 AM | #11 |
Drives: Black 2011 Camaro LS Join Date: Feb 2011
Location: Texas
Posts: 1,694
|
SOLD
__________________
White Fender Hashes from Big Worm Graphix with Custom White Bowties
GM Factory Remote Start and Factory Key Fob SS Fascia, Factory RS HIDs, Plasma P13W fog lights Non-RS to RS and fog light harness by Gen5DIY LED Interior, Trunk, and Licence Plate lights in white ZL1 Spoiler with Gen5DIY harness Factory NPP cat back Blacked out tail light bezels Factory 20 inch wheels wrapped in Nitto Motivos Lowered 1.25inch on Eibach Pro springs |
|
|
|
|