You are browsing camaro5 
 |
|
09-30-2013, 04:30 PM
|
#1 |
|
Choke on that causality!
Drives: 2010 2SS/RS Join Date: Sep 2009
Location: Minnesota
Posts: 645
|
Exhaust slipped back, melted the diffuser
While running at the track my exhaust slipped back a few inches and the mufflers started to melt the diffuser. Turns out the header to xpipe band clamps some how got a bit loose. Not sure how common this might be, but you might want to keep an eye out for those clamps getting loose if you have them.
__________________
Edelbrock EForce - Stainless Works Headers - BMR Sways & Arms & Toe Links & Control Arm Bushings & End Links - Rotofab CAI - Assorted Interior, Exterior, Underhood Bling - Red Jewel Stripes & Full Body Clear - Lexani LX15 Wheels - JRE Fuel Rail Upgrade - Kenne Bell BAP - Heartthrob XPipe - Elite Catch Can - Pedders Cradle & Front Arm Bushings - Hotchkis Strut Brace - MSD Wires - Carbotech Brakes - DSS 1000HP Axles & Driveshaft - Mickey Thompson Tires - Halo Harness - AutoMeter A/F, Boost, Fuel Pressure Gauges - Whats Next?
|
|
|
|
09-30-2013, 06:39 PM
|
#2 |
Drives: Chevys at the limit Join Date: Nov 2010
Location: SLC, UT
Posts: 9,621
|
That's a bummer.. We recommend going through and re-tightening everything after a couple heat cycles.
On the plus side, I bet you can pick a new one up for next to nothing from someone who upgraded to the 1LE diffuser. Best regards, Tyler 888-308-6007 |
|
|
|
|
09-30-2013, 07:09 PM
|
#3 |
 
|
I had a similar thing happen to me except it was from the tip getting hot while at the track and metled a little of the diffuser.
__________________
Race what you brung, Hope you brung enough
2016 2SS, NPP, Adrenaline Red Leather and Pads, 6sp, Sunroof, Black Bowties, Upgraded Wheels, 15% Tint, Kooks Headers, MBRP Exhaust, 1LE Wheels, Badging, Ported Throttle Body, Procharged, Snow Performance Stage 2 Meth Kit Coming Soon: Custom Cam, E85, Ported Heads |
|
|
|
|
|
|
|
 |
|
|
